Abstract:Oxidative cracking of polyolefins into functionalized molecules or oligomers promises the chemical upcycling of plastic wastes. In this work, we develop a novel approach to polyolefin waste upcycling that utilizes low-temperature oxidative cracking combined with dynamic cross-linking to produce recyclable elastomers. High-density polyethylene is oxidized into functionalized oligomers with end carboxyl groups at 110 degrees C, achieving tunable number-average molecular weights (M n) ranging from 1500 to 5500 Da at distributions (D) between 2.91 and 3.33. These oligomers with high crystallinity directly react with amorphous cis-polybutadiene containing pendant epoxy groups (an oxidized product of cis-polybutadiene) through esterification, forming a dynamically cross-linked elastomer. The elastomer displays a low glass transition temperature (T g) of approximately -100 degrees C while maintaining a melting point (T m) above 80 degrees C; it showcases a Young ' s modulus (E) of 12.0 +/- 0.4 MPa, elongation at break (epsilon) of 600 +/- 28%, tensile strength (sigma) of 16.4 +/- 0.8 MPa, tensile toughness (U T) of 46.0 +/- 3.5 MJ center dot m-3, and a good elasticity with 81.8% elastic recovery in a 10-cycle tensile test, even higher than that of commercial POEs such as POE-8150 of Dow Company. The dynamic ester-bond-based cross-linking enables the elastomer to be reprocessed. Our study introduces an efficient chemical upcycling process for polyolefin wastes, eliminating the need for tedious separation steps of cracking products.

Chemical Upcycling of Polyolefins through C–H Functionalization

Chemical Recycling of Polyolefin Waste: from the Perspective of Efficient Pyrolysis Reactors

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

Sustainable chemical upcycling of waste polyolefins by heterogeneous catalysis

C-H Functionalization of Polyolefins to Access Reprocessable Polyolefin Thermosets

Beyond Conventional Degradation: Catalytic Solutions for Polyolefin Upcycling

Sustainable Developments in Polyolefin Chemistry: Progress, Challenges, and Outlook

Catalytic Strategies for the Upcycling of Polyolefin Plastic Waste

Precise activation of C–C bonds for plastics recycling and upcycling

Upgrading waste plastics to value-added aromatics

Photochemical upcycling of polymers via visible light-driven C–H bond activation

Chemical recycling of polyolefins: a closed-loop cycle of waste to olefins

Recent Progress in the Chemical Upcycling of Plastic Wastes

Catalytic Upcycling of Polyolefins

A facile methodology for side- and up- cycling of HDPE waste via partial creation of unsaturated double bonds

Selective Upcycling of Polyolefins into High-Value Nitrogenated Chemicals

Ring‐Opening Polymerization of Cyclic Acetals: Strategy for Both Recyclable and Degradable Materials

Chemical upcycling of polyethylene, polypropylene, and mixtures to high-value surfactants

Catalytic conversion of mixed polyolefins under mild atmospheric pressure

Oxidative Upcycling of Polyethylene to Long Chain Diacid over Co‐MCM‐41 Catalyst

Recent Progresses and Challenges in Upcycling of Plastics through Selective Catalytic Oxidation