Abstract:For a sustainable development of polymeric materials, it is not only necessary to seek sustainable source of raw materials for their production, but also need reducing environmental pollution and resource depletion after their discard. The recovery of waste polymeric materials is one of most effective approaches for addressing the above issues. Therefore, there is an increasing research interest focused on their effective recovery. According to different recovery objectives, the recovery of polymeric materials is divided into energy recovery, mostly carried out by incineration, and matter recovery, which is further divided into "physcycling" or "mechcycling" (physical or mechanical recovery), "chemcycling" (chemical recovery), "physchemcycling" or "mechchemcycling" (physical and chemical recovery), and "biologcycling" (biological recovery). In recent years, more attention have been paid to the quality, performance, or value (including economic/environmental value) of the recycled products, which are used to define the "downcycling" and "upcycling". Whenever possible, a closed-loop recovery (i.e. "recycling") is always desirable because it can produce the recycled polymers from waste polymeric materials via physical recycling and chemical recycling, respectively. However, both methods have their limitations. The recycled polymers via physical recycling almost inevitably have deteriorated performances compared with the original polymers, often manifesting itself as downcycling of polymeric materials. On the other hand, chemical recycling can offer an opportunity to revert waste polymeric materials back to their monomers for repolymerization to virgin materials without altering the properties of the material or the economic value of the polymers. Unfortunately, only a small subset of polymeric materials could be chemically recycled in an energy-efficient and cost-effective manner. Therefore, more and more efforts have been devoted to upcycling polymeric materials although this field is still in its infancy. Chemcycling with flexible ways and strong designability is regarded as a promising method for upcycling that can recovers added-value chemicals or materials from polymeric materials. However, the traditional degradation process of polymeric materials is always carried out under harsh conditions, and inevitably generates complex distribution of degraded products which are difficult to separate and reutilize. Selective degradation of polymeric materials using highly efficient catalysts provides a sustainable approach to addressing this challenge. Moreover, the chemcycling process can be largely affected by the aggregated structure and composition of polymeric materials. We choose typical thermoplastic, thermosetting and hybrid polymeric materials, which are widely used and of a large quantity, to discuss their chemical upcycling, especially present author's recent relevant research work, and provide an insight into the future development of chemical upcycling.

Sustainable Developments in Polyolefin Chemistry: Progress, Challenges, and Outlook

Chemical Recycling of Polyolefin Waste: from the Perspective of Efficient Pyrolysis Reactors

New Sustainable Polymers with On-Demand Depolymerization Property

Advances in the Synthesis of Chemically Recyclable Polymers

Sustainable chemical upcycling of waste polyolefins by heterogeneous catalysis

Recent Advances in the Chemical Recycling of Polyesters

Sustainable high-density polyethylene via chemical recycling: From modification to polymerization methods

Recent Advances in Monomer Design for Recyclable Polymers

Chemical recycling of polyolefins: a closed-loop cycle of waste to olefins

Ring‐Opening Polymerization of Cyclic Acetals: Strategy for Both Recyclable and Degradable Materials

Beyond Conventional Degradation: Catalytic Solutions for Polyolefin Upcycling

Progress in Oxidative Degradation and Recovery of Polyolefin Plastics

Chemical Upcycling of Polyolefins through C–H Functionalization

Recent Progress in the Chemical Upcycling of Plastic Wastes

High-Performance Chemically Recyclable Multifunctional Polyolefin-Like Biomass-Derived Polyester Materials

Complete Degradation of Polyolefin Plastic Wastes to High‐Value Products

Catalytic depolymerization of polyester plastics toward closed-loop recycling and upcycling

Chemical Upcycling of Polymeric Materials

Upcycling to Sustainably Reuse Plastics

Deconstruction of Polymers through Olefin Metathesis

Biorenewable and circular polyolefin thermoplastic elastomers