Role of defects and exposed graphene in carbon nanomaterial-based electrocatalysts

Charles C. Chusuei,Ram Chandra Nepal

DOI: https://doi.org/10.1039/d3nj04054b

IF: 3.3

2024-01-01

New Journal of Chemistry

Abstract:Current variance depends upon the differing degrees of graphene defect densities and redox voltage of the analyte for various carbon nanomaterials serving as electrocatalysts.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Bridging Surface Charge and Catalytic Activity of Defective Carbon Electrocatalyst.

Li Tao,Man Qiao,Rong Jin,Yan Li,Zhaohui Xiao,Yuqing Wang,Nana Zhang,Chao Xie,Qinggang He,Dechen Jiang,Gang Yu,Yafei Li,Shuangyin Wang

DOI: https://doi.org/10.1002/anie.201810207

2019-01-01

Abstract:Electrocatalysis is dominated by reaction at the solid-liquid-gas interface; surface properties of electrocatalysts determine the electrochemical behavior. The surface charge of active sites on catalysts modulate adsorption and desorption of intermediates. However, there is no direct evidence to bridge surface charge and catalytic activity of active sites. Defects (active sites) were created on a HOPG (highly oriented pyrolytic graphite) surface that broke the intrinsic sp(2)-hybridization of graphite by plasma, inducing localization of surface charge onto defective active sites, as shown by scanning ion conductance microscopy (SICM) and Kelvin probe force microscopy (KPFM). An electrochemical test revealed enhanced intrinsic activity by the localized surface charge. DFT calculations confirmed the relationship between surface charge and catalytic activity. This work correlates surface charge and catalytic activity, providing insights into electrocatalytic behavior and guiding the design of advanced electrocatalysts.
Defect‐Derived Catalysis Mechanism of Electrochemical Reactions in Two‐Dimensional Carbon Materials

Yun Han,Xuecheng Yan,Qilong Wu,Hongzhe Xu,Qin Li,Aijun Du,Xiangdong Yao

DOI: https://doi.org/10.1002/sstr.202300036

IF: 15.9

2023-05-11

Small Structures

Abstract:Herein, a comprehensive summary of four kinds of defective graphene (DG)‐based electrocatalysts is presented, detailing their development history and origin of high catalytic activity, revealing the actual active sites and reaction mechanisms. In addition, the future development of DG‐based electrocatalysts is proposed, aiming to provide guidance on their target fabrication and practical applications. In the past decades, remarkable progress has been achieved in the exploration of electrocatalysts with high activity, long durability, and low cost. Among these, defective graphene (DG)‐based catalysts are considered as one of the most potential substitutes for precious metal‐based electrocatalysts. DG‐based catalysts contain abundant active centers with different configurations resulting from their extraordinary high‐structural tunability. Herein, an overview on recent advancements in developing four kinds of DG‐based catalysts is presented: 1) heteroatoms‐doped graphene; 2) intrinsic DG (vacancy and topological defect); 3) nonmetal atoms or/and metal species‐modified intrinsic DG (heterogeneous species and intrinsic defects co‐tuned DG); and 4) DG‐based van der Waals‐type multilayered heterostructures. In particular, the synergistic effects between various defects are discussed, and the origin of catalytic activity is reviewed. Meanwhile, the established defect‐derived catalytic mechanism is summarized, which is beneficial for the rational design and fabrication of high‐performance electrocatalysts for practical energy‐related applications. Finally, challenges and future research directions on defect engineering in noble metal‐free materials for electrocatalysis are proposed.
Defect Graphene as a Trifunctional Catalyst for Electrochemical Reactions

Yi Jia,Longzhou Zhang,Aijun Du,Guoping Gao,Jun Chen,Xuecheng Yan,Christopher L. Brown,Xiangdong Yao

DOI: https://doi.org/10.1002/adma.201602912

IF: 29.4

2016-09-13

Advanced Materials

Abstract:Defects derived by the removal of heteroatoms from graphene are demonstrated, both experimentally and theoretically, to be effective for all three basic electrochemical reactions, e.g., oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER). Density function theory calculations further reveal that the different types of defects are essential for the individual electrocatalytic activity for ORR, OER, and HER, respectively.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Defect Engineering in Carbon‐Based Electrocatalysts: Insight into Intrinsic Carbon Defects

Jiawei Zhu,Shichun Mu

DOI: https://doi.org/10.1002/adfm.202001097

IF: 19

2020-04-03

Advanced Functional Materials

Abstract:Functionalized carbon nanomaterials, as significant options for renewable energy systems, are widely utilized in diversified electrochemical reactions in virtue of property advantages. The inevitable defect sites in architectures greatly affect physicochemical properties of carbon nanomaterials, thus defect engineering has recently become a vital research orientation of carbon‐based electrocatalysts. The intentionally introduced intrinsic carbon defect sites in the frameworks can directly serve as the potential active sites owing to the altered surface charge state, modulated adsorption free energy of key intermediates, as well as diminished bandgap. Furthermore, the synergistic sites between intrinsic defects and heteroatom dopants/captured atomic metal species can further optimize the electronic structure and adsorption/desorption behavior, making carbon‐based catalysts comparable to commercial precious metal catalysts in electrocatalysis. With pressing research demands, the common configurations, construction strategies, structure–activity relationships, and characterization methods for intrinsic carbon defect‐involved catalytic centers are systematically summarized. Such theoretical and experimental evidences of intrinsic defect‐induced activity can reveal the active centers and relevant catalytic mechanism, thereby providing necessary guidance for the design and construction of highly efficient carbon‐based electrocatalysts and promoting their commercial applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Defective Graphene for Electrocatalytic CO2 Reduction

Peng Han,Xiaomin Yu,Di Yuan,Min Kuang,Yifei Wang,Abdullah M. Al-Enizi,Gengfeng Zheng

DOI: https://doi.org/10.1016/j.jcis.2018.09.036

IF: 9.9

2018-01-01

Journal of Colloid and Interface Science

Abstract:The rational synthesis of earth-abundant materials with excellent electrocatalytic performances plays a critical role in electrochemical CO2 reduction (ECR) to obtain value-added chemical products or fuels. Here we demonstrate a defective graphene (DG) as such an electrocatalyst candidate via a nitrogen removal method. The graphene with a large amount of topological defects offered abundant catalytically active sites, high electronic conductivity and strong adsorption of CO2. Attributed to these features, the DG exhibited significantly higher electrocatalytic CO2 reduction performances with an excellent faradaic efficiency of 84% at 0.6 V vs. reversible hydrogen electrode and a larger current density, compared to pristine graphene, nitrogen-doped graphene and edge-rich graphene. This work suggests a promising method for further designing efficient metal-free electrocatalysts for CO2 reduction. (C) 2018 Elsevier Inc. All rights reserved.
Defect electrocatalytic mechanism: concept, topological structure and perspective

Yi Jia,Jun Chen,Xiangdong Yao

DOI: https://doi.org/10.1039/c8qm00070k

IF: 8.6834

2018-01-01

Materials Chemistry Frontiers

Abstract:This review focuses on an in-depth understanding of carbon defects and an account of defective carbon-based materials for advanced electrocatalysis.

materials science, multidisciplinary,chemistry
Tailoring defects in 2D materials for electrocatalysis

Leping Yang,Yuchi Wan,Ruitao Lv

DOI: https://doi.org/10.1016/b978-0-12-820292-0.00016-1

2022-01-01

Abstract:Two-dimensional (2D) materials with unique electronic structures, tunable band-gap states and highly exposed surface areas have provided researchers a fertile ground for electrocatalysis. However, the spatial anisotropy and inert basal planes severely hinder charge transport and catalytic conversion efficiency. At this time, three major issues need to be addressed: (i) tuning surface electronic states to optimize the reaction energy barriers; (ii) incorporation of sufficient active sites to improve the surface electrochemical reactivity and (iii) enhancing the electrical conductivity to accelerate electron transport among the reaction interfaces. Defect engineering is an effective strategy to address the above issues by modulating local electronic configurations, and thus triggering catalytic activity of the inert components. In this chapter, we summarize the state-of-the-art advances in defect engineering of 2D materials for electrocatalytic applications, involving hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO 2 RR), and nitrogen reduction reaction (NRR). Moreover, the electrocatalytic mechanisms on the defective centers are also discussed in depth. Finally, the challenges and opportunities of defect engineering for 2D electrocatalysts are proposed.
Defect Engineering on Carbon-Based Catalysts for Electrocatalytic CO2 Reduction

Dongping Xue,Huicong Xia,Wenfu Yan,Jianan Zhang,Shichun Mu

DOI: https://doi.org/10.1007/s40820-020-00538-7

2020-10-27

Abstract:Abstract Electrocatalytic carbon dioxide (CO 2 ) reduction (ECR) has become one of the main methods to close the broken carbon cycle and temporarily store renewable energy, but there are still some problems such as poor stability, low activity, and selectivity. While the most promising strategy to improve ECR activity is to develop electrocatalysts with low cost, high activity, and long-term stability. Recently, defective carbon-based nanomaterials have attracted extensive attention due to the unbalanced electron distribution and electronic structural distortion caused by the defects on the carbon materials. Here, the present review mainly summarizes the latest research progress of the construction of the diverse types of defects (intrinsic carbon defects, heteroatom doping defects, metal atomic sites, and edges detects) for carbon materials in ECR, and unveil the structure–activity relationship and its catalytic mechanism. The current challenges and opportunities faced by high-performance carbon materials in ECR are discussed, as well as possible future solutions. It can be believed that this review can provide some inspiration for the future of development of high-performance ECR catalysts.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Regulation of 2D Graphene Materials for Electrocatalysis.

Xinqun Zhang,Jian Gao,Yukun Xiao,Jiaqi Wang,Guoqiang Sun,Yang Zhao,Liangti Qu

DOI: https://doi.org/10.1002/asia.202000249

2020-01-01

Chemistry - An Asian Journal

Abstract:Benefiting from unique excellent physical and chemical characteristics, graphene has attracted widespread attention in the application of electrocatalysis. As a promising candidate, graphene is usually regulated with surface defects, heteroatoms, metal atoms and other active materials through covalent or non-covalent bonds to substitute for noble metal catalysts, which has not been targeted in a report yet. In this review, we summarize the recent advances of approaches for engineering graphene-based electrocatalysts and emphasize the corresponding electrocatalytic active sites in various electrocatalysis circumstances, such as electrocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc. The opportunities and challenges in the future development of graphene-based catalysts are also discussed.
Defects on carbons for electrocatalytic oxygen reduction

Xuecheng Yan,Yi Jia,Xiangdong Yao

DOI: https://doi.org/10.1039/c7cs00690j

IF: 46.2

2018-01-01

Chemical Society Reviews

Abstract:A general defect promoted catalysis mechanism is established to reveal the active sites of various defective carbon based ORR electrocatalysts.

chemistry, multidisciplinary
Theoretical Study of the Defects and Doping in Tuning the Electrocatalytic Activity of Graphene for CO2 Reduction

Xiao Su,Fanqi Meng,Xiang Li,Yueying Liu,Hongwei Tan,Guangju Chen

DOI: https://doi.org/10.3390/nano13152273

IF: 5.3

2023-08-07

Nanomaterials

Abstract:The application of graphene-based catalysts in the electrocatalytic CO2 reduction reaction (ECO2RR) for mitigating the greenhouse effect and energy shortage is a growing trend. The unique and extraordinary properties of graphene-based catalysts, such as low cost, high electrical conductivity, structural tunability, and environmental friendliness, have rendered them promising materials in this area. By doping heteroatoms or artificially inducing defects in graphene, its catalytic performance can be effectively improved. In this work, the mechanisms underlying the CO2 reduction reaction on 10 graphene-based catalysts were systematically studied. N/B/O-codoped graphene with a single-atom vacancy defect showed the best performance and substantial improvement in catalytic activity compared with pristine graphene. The specific roles of the doped elements, including B, N, and O, as well as the defects, are discussed in detail. By analysing the geometric and electronic structures of the catalysts, we showed how the doped heteroatoms and defects influence the catalytic reaction process and synergistically promoted the catalytic efficiency of graphene.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Scalable solid-phase synthesis of defect-rich graphene for oxygen reduction electrocatalysis

Chunxiao Dong,Li Yang,Cheng Lian,Xiaoling Yang,Yihua Zhu,Hongliang Jiang,Chunzhong Li

DOI: https://doi.org/10.1016/j.gee.2021.03.012

2021-03-01

Abstract:Scalable route is developed to synthesize defective graphene by pyrolyzing the mixture of glucose and carbon nitride.Molecular dynamics simulations are employed to reveal the formation process of defective graphene.The graphene catalyst exhibits higher power density than commercial Pt/C catalyst in a primary Zn-air battery.Graphitic nitrogen-modified topological defects at carbon framework edges are proved to be responsible for the decent performance.Defect-engineered carbon materials have been emerged as promising electrocatalysts for oxygen reduction reaction (ORR) in metal-air batteries. Developing a facile strategy for the preparation of highly active nanocarbon electrocatalysts remains challenging. Herein, a low-cost and simple route is developed to synthesize defective graphene by pyrolyzing the mixture of glucose and carbon nitride. Molecular dynamics simulations reveal that the graphene formation is ascribed to two-dimensional layered feature of carbon nitride, and high compatibility of carbon nitride/glucose systems. Structural measurements suggest that the graphene possesses rich edge and topological defects. The graphene catalyst exhibits higher power density than commercial Pt/C catalyst in a primary Zn-air battery. Combining experimental results and theoretical thermodynamic analysis, it is identified that graphitic nitrogen-modified topological defects at carbon framework edges are responsible for the decent ORR performance. The strategy presented in this work can be can be scaled up readily to fabricate defective carbon materials.In order to obtain the porous and defective graphene materials with decent ORR performance, herein we investigate glucose-C3N4 systems. Glucose molecules can easily insert into C3N4 segments with high compatibility, the porous and defective characteristics of graphene are inherited from the rapid decomposition of C3N4 in this incorporate system. Highly efficient and low-cost catalysts for ORR is achieved through a green and facile strategy.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025721000601-ga1_lrg.jpg">Download : Download high-res image (384KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S2468025721000601-ga1.jpg">Download : Download full-size image</a></li></ol>

energy & fuels,engineering, chemical,green & sustainable science & technology,chemistry, physical
Defect engineering in earth-abundant electrocatalysts for CO2 and N2 reduction

Qichen Wang,Yongpeng Lei,Dingsheng Wang,Yadong Li

DOI: https://doi.org/10.1039/c8ee03781g

IF: 32.5

2019-01-01

Energy & Environmental Science

Abstract:The electrocatalytic CO2 reduction reaction (CRR) and N-2 reduction reaction (NRR), which convert inert small molecules into high-value products under mild conditions, have received much research attention. Defect engineering is an important strategy for modulating the electronic properties of electrocatalysts, which may endow unexpected physical and chemical properties to break the intrinsic bottleneck and, therefore, boost the electrocatalytic performance. To date, various defective nanomaterials (such as nanocarbon and transition metal compounds) have been synthesized that display great potential for the CRR and NRR. Therefore, a deep understanding of the influence of defects on the catalytic activity is urgently needed. In this review, the type, regulation strategy, fine defect characterization methods, and their application in the electrocatalytic CRR and NRR are discussed and summarized. Furthermore, the major challenges, opportunities, and future development direction of defect engineering in CRR and NRR catalysts are proposed. This review aims to provide a reference for the proof-of-concept design of highly active CRR and NRR electrocatalysts.
Understanding the Role of Atomic Defects in Nanocarbon Support with Cooperative Fe Host As Single Atoms/Nanoclusters Towards Superior Electrocatalysis

Kishwar Khan,Gyutae Nam,Melike Sevim,Yoojin Ahn,Meilin Liu

DOI: https://doi.org/10.1149/ma2022-02431615mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:High-performance electrocatalysts for oxygen reduction reaction (ORR) are vital to many chemical and energy transformation processes. To date, however, the role of atomic defects in nanocarbon (NC) supports for ORR electro-catalysts is still poorly understood. In this presentation, we report our findings in understanding the contribution of atomic defects in NC supports to a series of transition metals (TM) based electro-catalysts to enhance the ORR activity and stability in an alkaline medium. The defect structures and their local coordination are characterized using Operando X-ray absorption spectroscopy and ex-situ Raman spectroscopy. Moreover, the atomic level structure and morphology of the materials are revealed using high-resolution transmission electron microscopy. Further, density functional theory calculations are used to gain deeper insight into the mechanisms of electro-catalytic processes. Our studies not only result in a highly promising ORR electro-catalyst in an alkaline medium but also open a new avenue for rational design of more efficient catalysts for other chemical and energy transformation processes.
Zn-induced Defect Engineering to Activate Bimetallic NiCo Alloy@nitrogen-Doped Graphene Hybrid Nanomaterials for Enhanced Oxygen Reduction Reaction

Bo Zheng,Yue Zhou,Chuan Yu,Shaoxian Liu,Zhaorui Pan,Xiaofeng Wang,Guangxiang Liu,Leiming Lang

DOI: https://doi.org/10.1007/s10853-020-05102-7

IF: 4.5

2020-01-01

Journal of Materials Science

Abstract:Developing valid strategies to fabricate highly active non-platinum-group metal electrocatalysts for catalyzing the sluggish cathode oxygen reduction reaction (ORR) is urgently required. To our knowledge, the catalytic performance of heterogeneous catalysts is highly related to their electronic and architectural properties. Defect or vacancy engineering is a particularly attractive means of modifying the physicochemical properties of nanomaterials. Herein, in this work, we proposed a facile Zn-induced defect strategy to engineer the electronic and surface structure of non-noble bimetallic NiCo alloy@nitrogen-doped graphene hybrid nanomaterials for boosting ORR activity. The optimized sample shows prominently enhanced activity for the ORR in KOH solution and exhibits better stability and methanol tolerance compared to Pt/C. Physicochemical and electrochemical measurements demonstrate that the enhanced ORR performance is mainly ascribed to the proper Zn-induced vacancy defects, which finely modulate the energy level of electrocatalyst, thus activating ORR process thermodynamically. Moreover, rich exposed active sites from vacancy defects largely facilitate the sluggish kinetics. This strategy is exceptionally promising to be applied to optimize other non-noble metal-based nanomaterials for highly efficient electrocatalysis.
Can graphene with intrinsic defects electrocatalyze N2 to NH3 reduction?

Fei Wang,Xia Xu,Jian Mao

DOI: https://doi.org/10.1016/j.diamond.2020.108037

IF: 3.806

2020-11-01

Diamond and Related Materials

Abstract:Defect engineering strategy is widely adopted to design graphene/ graphene-composited N2 reduction reaction (NRR) electrocatalysts. Currently, all attentions are focused on the introduction of extrinsic defects for graphene, but the intrinsic defects of graphene are ignored even though they would be commonly introduced in the procedures of preparation and processing. Herein, the effect of intrinsic defects of graphene (dislocation, vacancy and edge defects) on NRR is studied by density functional theory (DFT) calculation firstly. Graphene with armchair and zigzag edges shows inert for NRR due to the unfavourable N2 capture. For the graphene with vacancy and dislocation defects, the two configurations exhibit favourable N2 capture (negative N2 adsorption free energies), acceptable energy barriers at the potential-determining step and high NRR selectivity. This work would remind researchers that the effect of intrinsic defects of graphene cannot be ignored when analyzing the source of NRR performance, and provides a brand-new potential paradigm to design graphene/ graphene-composited NRR electrocatalysts.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Intrinsic carbon structural imperfections for enhancing energy conversion electrocatalysts

Kun Guo,Ning Li,Lipiao Bao,Panpan Zhang,Xing Lu

DOI: https://doi.org/10.1016/j.cej.2023.143060

IF: 15.1

2023-04-27

Chemical Engineering Journal

Abstract:Carbon-based metal-free electrocatalysts have been placed with great expectations since their very first emergence. As a promising alternative to the noble metal-based counterparts, significant advancements have been made in this exciting research field. Sizable amounts of efforts have been devoted to understanding the function and mechanism of metalloid dopants. It is believed that dopants induce asymmetric distribution of charge/spin densities, turning adjoining carbon atoms into catalytically active sites. However, the intrinsic structural imperfections/defects that ubiquitously exist in carbon materials have recently been demonstrated to outperform dopants in enhancing the catalytic properties of carbon catalysts. This new source of activity contributor has thus triggered considerable attention to dopant-free defect-rich carbon electrocatalysts. To follow up recent progress, we present a state-of-the-art and systematic overview specifically focusing on the critical role of intrinsic structural defects in dopant-free carbon electrocatalysts for energy conversion applications. Various aspects in terms of definition, characterization, function, and catalytic mechanism of structural defects are thoroughly covered together with some shared perspectives on the future opportunities. We hope this contribution will inspire more efforts in this fascinating direction and push forward the further development of carbon-based electrocatalysts.

engineering, chemical, environmental
Defect engineering in graphene-based nanospheres enhanced hydrogen evolution reaction performance of ruthenium nanoparticles

Yongqing Shen,Peizhi Liu,Jinlong Du,Yanhui Song,Hailiang Cao,Min Zhao,Peng Gao,Bingshe Xu,Junjie Guo,Yucheng Wu

DOI: https://doi.org/10.1016/j.carbon.2020.05.033

IF: 10.9

2020-09-01

Carbon

Abstract:The lattice defects in graphene-based carbon materials have been proven to play a critical role for improving the hydrogen evolution reaction (HER) behavior of supported metal catalysts. Nevertheless, accurately manipulating the intensity and distribution of defects for the optimal carbon structure still remains a significant challenge. Here, the microstructures of graphene nanospheres (GNs), in the form of defects distribution and graphitization degree, are accurately regulated by annealing. The optimal electrocatalyst () was achieved by annealing at 300 °C, giving an overpotential of 40 mV at a current density of 10 mA cm−2 together with superior durability in the HER performance test in 1 M KOH. Particularly, the catalyst has been annealed in situ in transmission electron microscope to monitor its structural evolution. The results indicate that the aggregation of Ru nanoparticles have not been observed up to 900 °C, while the graphitization degree of carbon support increased with elevated temperature. It is worth noting that the optimized electrocatalytic activity of originates from the annealing induced defects regulating of GNs. Thus, the structural optimizing of carbon supports by defect engineering provides an efficient approach to improve the catalytic performance for HER.

materials science, multidisciplinary,chemistry, physical
The Role of Intrinsic Defects in Electrocatalytic Activity of Monolayer Vs2 Basal Planes for the Hydrogen Evolution Reaction

Yang Zhang,Xiaoshuang Chen,Yan Huang,Chong Zhang,Feng Li,Haibo Shu

DOI: https://doi.org/10.1021/acs.jpcc.6b11987

2017-01-01

Abstract:Two-dimensional VS2 nanomaterials have emerged as highly efficient and inexpensive electrocatalysts for the hydrogen evolution reaction (HER), and the further improvement of their HER performance depends on the understanding of the catalytic mechanism and activity in various pristine and defective structures. Here, structural stability, electronic properties, and HER activity of monolayer VS2 nanosheets with various intrinsic point defects are studied by using first-principles calculations. Compared to the most-studied 2H-phase MoS2 basal plane, both 2H- and IT-phase VS2 basal planes exhibit superior catalytic activity due to their metallic properties. With the introduction of intrinsic point defects onto VS2 basal planes, we find that there are four types of stable defects in the 2H phase (i.e., S-ad, S-vac V-ad, and V-s) and three types of stable defects in the 1T phase (i.e., S-ad, S-vac and V-ad). Moreover, the formation of S-vac, V-ad, and V-s structures in the 2H phase and Vad in the 1T phase can enhance the HER activity of basal planes, which implies that the synthesis of VS2 nanosheets at the V rich condition facilitates the achievement of high HER performance. The HER activity of pristine and defective VS2 structures can be well understood by a Fermi-abundance model that is also suitable to describe a broad class of electrocatalytic HER systems. This work provides a deep insight into the HER activity of single-layer VS2 and the guidance for synthesizing highly active electrocatalysts in transition-metal dichalcogenides.
Synthesis of Graphene-Quantum-Dots Decorated Metal-Free Carbon Nitride for Effective Electrocatalysts in Redox-mediated Electrolyte

Ying Liu,Bo Yan,Haiyue Zhuo,Churong Ma,Kai Chen

DOI: https://doi.org/10.1016/j.jallcom.2024.174323

IF: 6.2

2024-03-01

Journal of Alloys and Compounds

Abstract:Defect engineering of N/C3N4 two-dimensional material provides an efficient way to tune the electronic structures and make more active sites for electrocatalysis, which is attractive for electrochemical energy storage applications. Other than modification of heteroatoms on the top of C3N4 two-dimensional material as a photosensitizer, electrolyte design is very desirable to enrich the research area and provides a wide range of choices for diverse applications. Herein, the graphene quantum dots (GQDs) decorated N doped g-C3N4 electrocatalysts for water splitting were fabricated, which exhibited enhanced electron transfer efficiency, better electrocatalytic performance, and long-term stability. The electrochemical performances of GQDs@C3N4+x in neutral, acidic, alkaline, and redox-mediated electrolytes were investigated, respectively. The GQDs@C3N4+x electrode displays excellent activity toward electrocatalytic reaction in redox-mediated solution. The increase in electrocatalytic performance could be attributed to the reaction of redox species with the surface holes and the defects of GQDs@C3N4+x , leading to a better separation of the excited electron-hole pairs. Thus, this work greatly broadens the application prospects of carbon nitrogen complex by rational defect engineering and electrolyte regulation.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering

Role of defects and exposed graphene in carbon nanomaterial-based electrocatalysts

Bridging Surface Charge and Catalytic Activity of Defective Carbon Electrocatalyst.

Defect‐Derived Catalysis Mechanism of Electrochemical Reactions in Two‐Dimensional Carbon Materials

Defect Graphene as a Trifunctional Catalyst for Electrochemical Reactions

Defect Engineering in Carbon‐Based Electrocatalysts: Insight into Intrinsic Carbon Defects

Defective Graphene for Electrocatalytic CO2 Reduction

Defect electrocatalytic mechanism: concept, topological structure and perspective

Tailoring defects in 2D materials for electrocatalysis

Defect Engineering on Carbon-Based Catalysts for Electrocatalytic CO2 Reduction

Regulation of 2D Graphene Materials for Electrocatalysis.

Defects on carbons for electrocatalytic oxygen reduction

Theoretical Study of the Defects and Doping in Tuning the Electrocatalytic Activity of Graphene for CO2 Reduction

Scalable solid-phase synthesis of defect-rich graphene for oxygen reduction electrocatalysis

Defect engineering in earth-abundant electrocatalysts for CO2 and N2 reduction

Understanding the Role of Atomic Defects in Nanocarbon Support with Cooperative Fe Host As Single Atoms/Nanoclusters Towards Superior Electrocatalysis

Zn-induced Defect Engineering to Activate Bimetallic NiCo Alloy@nitrogen-Doped Graphene Hybrid Nanomaterials for Enhanced Oxygen Reduction Reaction

Can graphene with intrinsic defects electrocatalyze N2 to NH3 reduction?

Intrinsic carbon structural imperfections for enhancing energy conversion electrocatalysts

Defect engineering in graphene-based nanospheres enhanced hydrogen evolution reaction performance of ruthenium nanoparticles

The Role of Intrinsic Defects in Electrocatalytic Activity of Monolayer Vs2 Basal Planes for the Hydrogen Evolution Reaction

Synthesis of Graphene-Quantum-Dots Decorated Metal-Free Carbon Nitride for Effective Electrocatalysts in Redox-mediated Electrolyte