Atomic clock keeps ultra-precise time aboard a rocking naval ship

Elizabeth Gibney

DOI: https://doi.org/10.1038/d41586-024-01166-6

IF: 64.8

2024-04-25

Nature

Abstract:The best timepieces tend to be fragile, but a device based on iodine threads the needle between precision and practicality. The best timepieces tend to be fragile, but a device based on iodine threads the needle between precision and practicality.

multidisciplinary sciences

What problem does this paper attempt to address?

Robust optical clocks promise stable timing in a portable package

Bonnie L. S. Marlow,Jonathan Hirschauer

DOI: https://doi.org/10.1038/d41586-024-01022-7

IF: 64.8

2024-04-25

Nature

Abstract:A highly precise timekeeping instrument has been adapted for the real world. The compact and robust device is smaller than its commercial counterparts and performs comparably in the laboratory and aboard a naval ship. At-sea testing of three compact optical clocks.

multidisciplinary sciences
Quantum Tech: Squeezing an Optical Atomic Clock Into a Briefcase: A Mind-Set Shift Propelled the Leap from Basic Science to Invention

Dina Genkina

DOI: https://doi.org/10.1109/mspec.2024.10749725

IF: 3.578

2024-11-13

IEEE Spectrum

Abstract:WALKING INTO Jun Ye's lab at the University of Colorado Boulder is a bit like walking into an electronic jungle. There are wires strung across the ceiling that hang down to the floor. Right in the middle of the room are four hefty steel tables with metal panels above them extending all the way to the ceiling. Slide one of the panels to the side and you'll see a dense mesh of vacuum chambers, mirrors, magnetic coils, and laser light bouncing around in precisely orchestrated patterns. ¶ This is one of the world's most precise and accurate clocks, and it's so accurate that you'd have to wait 40 billion years-or three times the age of the universe-for it to be off by one second. ¶ What's interesting about Ye's atomic clock, part of a joint endeavor between the University of Colorado Boulder and the National Institute of Standards and Technology (NIST), is that it is optical, not microwave like most atomic clocks. The ticking heart of the clock is the strontium atom, and it beats at a frequency of 429 terahertz, or 429 trillion ticks per second. It's the same frequency as light in the lower part of the red region of the visible spectrum, and that relatively high frequency is a pillar of the clock's incredible precision. Commonly available atomic clocks beat at frequencies in the gigahertz range, or about 10 billion ticks per second. Going from the microwave to the optical makes it possible for Ye's clock to be tens of thousands of times as precise.

engineering, electrical & electronic
The Best DIY Quartz Clock Yet > Vastly Superior Timing Tech Comes Home

Gavin Watkins

DOI: https://doi.org/10.1109/mspec.2024.10418948

IF: 3.578

2024-02-07

IEEE Spectrum

Abstract:Accurate timing is something that's always been of interest to me. These days we rely heavily on time delivered to us over the Internet, or through radio waves from GPS satellites or broadcast stations. But I wanted a clock that would keep excellent time without relying on the outside world-certainly something better than the time provided by the quartz crystal

engineering, electrical & electronic
Demonstration of a Mobile Optical Clock Ensemble at Sea

E. Ahern,J. W. Allison,C. Billington,N. Bourbeau Hébert,A. P. Hilton,E. Klantsataya,C. Locke,A. N. Luiten,M. Nelligan,R. F. Offer,C. Perrella,S. K. Scholten,B. White,B. M. Sparkes,R. Beard,J. D. Elgin,K. W. Martin

2024-06-21

Abstract:Atomic clocks have been at the leading edge of accuracy and precision since their inception in the 1950s. However, typically the most capable of these clocks have been confined to laboratories despite the fact that there are compelling reasons to apply them in the field and/or while in motion. These applications include synchronization of distributed critical infrastructure (e.g. data servers, communications, electricity grids), scientific applications (e.g. radio-astronomy) and to mitigate the effects of interruption to Global Navigation Satellite Systems. Over the last 20 years, there has been a breakthrough in the performance of atomic clocks by transitioning from an atomic reference based on a microwave transition to an optical frequency transition. The $10^5$-fold increase in reference frequency confers the potential for significantly higher performance. However, this performance increase has come at the cost of size, complexity and fragility which has continued the confinement of these clocks to the laboratory. Here we report on a recent international collaboration where three emerging optical clocks, each operating on different principles, were trialed at sea. These clocks incorporate optical frequency combs so that their stable frequency outputs can be used directly in electronic apparatus and were also automated so that they do not require expert supervision. We present the frequency stability and reliability of these three clocks over multiple weeks of unsupervised naval trials, both in harbour and on the ocean. The performance of all three devices was orders of magnitude superior to existing best-in-class commercial solutions over short and medium timescales. This demonstrates that optical clocks are ready to deliver advantages for real-world applications.

Atomic Physics
Atomic clock performance beyond the geodetic limit

W. F. McGrew,X. Zhang,R. J. Fasano,S. A. Schäffer,K. Beloy,D. Nicolodi,R. C. Brown,N. Hinkley,G. Milani,M. Schioppo,T. H. Yoon,A. D. Ludlow

DOI: https://doi.org/10.48550/arXiv.1807.11282

2018-07-30

Atomic Physics

Abstract:The passage of time is tracked by counting oscillations of a frequency reference, such as Earth's revolutions or swings of a pendulum. By referencing atomic transitions, frequency (and thus time) can be measured more precisely than any other physical quantity, with the current generation of optical atomic clocks reporting fractional performance below the $10^{-17}$ level. However, the theory of relativity prescribes that the passage of time is not absolute, but impacted by an observer's reference frame. Consequently, clock measurements exhibit sensitivity to relative velocity, acceleration and gravity potential. Here we demonstrate optical clock measurements surpassing the present-day ability to account for the gravitational distortion of space-time across the surface of Earth. In two independent ytterbium optical lattice clocks, we demonstrate unprecedented levels in three fundamental benchmarks of clock performance. In units of the clock frequency, we report systematic uncertainty of $1.4 \times 10^{-18}$, measurement instability of $3.2 \times 10^{-19}$ and reproducibility characterised by ten blinded frequency comparisons, yielding a frequency difference of $[-7 \pm (5)_{stat} \pm (8)_{sys}] \times 10^{-19}$. While differential sensitivity to gravity could degrade the performance of these optical clocks as terrestrial standards of time, this same sensitivity can be used as an exquisite probe of geopotential. Near the surface of Earth, clock comparisons at the $1 \times 10^{-18}$ level provide 1 cm resolution along gravity, outperforming state-of-the-art geodetic techniques. These optical clocks can further be used to explore geophysical phenomena, detect gravitational waves, test general relativity and search for dark matter.
Physicists move closer to an ultra-precise 'nuclear' clock

Elizabeth Gibney

DOI: https://doi.org/10.1038/d41586-024-01353-5

IF: 64.8

2024-05-09

Nature

Abstract:Timekeepers based on energy shifts in atomic nuclei could transform fundamental-physics research. Timekeepers based on energy shifts in atomic nuclei could transform fundamental-physics research.

multidisciplinary sciences
On a New Class of Self-Referencing, 1/τ Atomic Clocks

Wang Li-Jun

DOI: https://doi.org/10.1088/0256-307x/31/8/080601

2014-01-01

Chinese Physics Letters

Abstract:The merit of a modern atomic clock is measured by its phase stability. A clock's absolute time-keeping uncertainty typically worsens over its operating time tau as Delta tau proportional to root tau, with an Allan deviation of sigma(y)(tau) = Delta tau/tau proportional to tau(-1/2). Here we analyze a new class of self-referencing clocks, whose phase is locked to itself after a certain time delay. We show that the Allan deviation of such clocks decreases as 1/tau over a long and controllable operating time. This class of clocks can maintain synchronization over a prolonged period with only a fixed, almost non-increasing, absolute uncertainty, forming an ideal time-piece.
Timekeepers in Space

Edwin Cartlidge

DOI: https://doi.org/10.1364/opn.35.1.000026

2024-01-01

Optics and Photonics News

Abstract:Placing optical clocks in orbit could potentially transform timekeeping, navigation and precision science—if scientists can overcome the formidable hurdles involved.
Atomic clock performance enabling geodesy below the centimetre level

W. F. McGrew,X. Zhang,R. J. Fasano,S. A. Schäffer,K. Beloy,D. Nicolodi,R. C. Brown,N. Hinkley,G. Milani,M. Schioppo,T. H. Yoon,A. D. Ludlow

DOI: https://doi.org/10.1038/s41586-018-0738-2

IF: 64.8

2018-11-28

Nature

Abstract:The passage of time is tracked by counting oscillations of a frequency reference, such as Earth’s revolutions or swings of a pendulum. By referencing atomic transitions, frequency (and thus time) can be measured more precisely than any other physical quantity, with the current generation of optical atomic clocks reporting fractional performance below the 10−17 level1–5. However, the theory of relativity prescribes that the passage of time is not absolute, but is affected by an observer’s reference frame. Consequently, clock measurements exhibit sensitivity to relative velocity, acceleration and gravity potential. Here we demonstrate local optical clock measurements that surpass the current ability to account for the gravitational distortion of space-time across the surface of Earth. In two independent ytterbium optical lattice clocks, we demonstrate unprecedented values of three fundamental benchmarks of clock performance. In units of the clock frequency, we report systematic uncertainty of 1.4 × 10−18, measurement instability of 3.2 × 10−19 and reproducibility characterized by ten blinded frequency comparisons, yielding a frequency difference of [−7 ± (5)stat ± (8)sys] × 10−19, where ‘stat’ and ‘sys’ indicate statistical and systematic uncertainty, respectively. Although sensitivity to differences in gravity potential could degrade the performance of the clocks as terrestrial standards of time, this same sensitivity can be used as a very sensitive probe of geopotential5–9. Near the surface of Earth, clock comparisons at the 1 × 10−18 level provide a resolution of one centimetre along the direction of gravity, so the performance of these clocks should enable geodesy beyond the state-of-the-art level. These optical clocks could further be used to explore geophysical phenomena10, detect gravitational waves11, test general relativity12 and search for dark matter13–17.

multidisciplinary sciences
Breakthrough promises new era of ultraprecise nuclear clocks

Jay Bennett

DOI: https://doi.org/10.1126/science.ads9195

IF: 56.9

2024-09-06

Science

Abstract:Timekeepers based on energy transitions in atomic nuclei could be stable, portable, and able to probe new physics.
Demonstration of a trapped-ion atomic clock in space

E. A. Burt,J. D. Prestage,R. L. Tjoelker,D. G. Enzer,D. Kuang,D. W. Murphy,D. E. Robison,J. M. Seubert,R. T. Wang,T. A. Ely

DOI: https://doi.org/10.1038/s41586-021-03571-7

IF: 64.8

2021-06-30

Nature

Abstract:Atomic clocks, which lock the frequency of an oscillator to the extremely stable quantized energy levels of atoms, are essential for navigation applications such as deep space exploration<a href="/articles/s41586-021-03571-7#ref-CR1">1</a> and global navigation satellite systems<a href="/articles/s41586-021-03571-7#ref-CR2">2</a>, and are useful tools with which to address questions in fundamental physics<a href="#ref-CR3">3</a>,<a href="#ref-CR4">4</a>,<a href="#ref-CR5">5</a>,<a href="/articles/s41586-021-03571-7#ref-CR6">6</a>. Such satellite systems use precise measurement of signal propagation times determined by atomic clocks, together with propagation speed, to calculate position. Although space atomic clocks with low instability are an enabling technology for global navigation, they have not yet been applied to deep space navigation and have seen only limited application to space-based fundamental physics, owing to performance constraints imposed by the rigours of space operation<a href="/articles/s41586-021-03571-7#ref-CR7">7</a>. Methods of electromagnetically trapping and cooling ions have revolutionized atomic clock performance<a href="#ref-CR8">8</a>,<a href="#ref-CR9">9</a>,<a href="#ref-CR10">10</a>,<a href="#ref-CR11">11</a>,<a href="#ref-CR12">12</a>,<a href="/articles/s41586-021-03571-7#ref-CR13">13</a>. Terrestrial trapped-ion clocks operating in the optical domain have achieved orders-of-magnitude improvements in performance over their predecessors and have become a key component in national metrology laboratory research programmes<a href="/articles/s41586-021-03571-7#ref-CR13">13</a>, but transporting this new technology into space has remained challenging. Here we show the results from a trapped-ion atomic clock operating in space. On the ground, NASA's Deep Space Atomic Clock demonstrated a short-term fractional frequency stability of 1.5 × 10−13/τ1/2 (where τ is the averaging time)<a href="/articles/s41586-021-03571-7#ref-CR14">14</a>. Launched in 2019, the clock has operated for more than 12 months in space and demonstrated there a long-term stability of 3 × 10−15 at 23 days (no drift removal), and an estimated drift of 3.0(0.7) × 10−16 per day. Each of these exceeds current space clock performance by up to an order of magnitude<a href="#ref-CR15">15</a>,<a href="#ref-CR16">16</a>,<a href="/articles/s41586-021-03571-7#ref-CR17">17</a>. The Deep Space Atomic Clock is particularly amenable to the space environment because of its low sensitivity to variations in radiation, temperature and magnetic fields. This level of space clock performance will enable one-way navigation in which signal delay times are measured in situ, making near-real-time navigation of deep space probes possible<a href="/articles/s41586-021-03571-7#ref-CR18">18</a>.

multidisciplinary sciences
Optical Atomic Clocks

Andrew D. Ludlow,Martin M. Boyd,Jun Ye,Ekkehard Peik,Piet O. Schmidt

DOI: https://doi.org/10.48550/arXiv.1407.3493

2015-02-09

Abstract:Optical atomic clocks represent the state-of-the-art in the frontier of modern measurement science. In this article we provide a detailed review on the development of optical atomic clocks that are based on trapped single ions and many neutral atoms. We discuss important technical ingredients for optical clocks, and we present measurement precision and systematic uncertainty associated with some of the best clocks to date. We conclude with an outlook on the exciting prospect for clock applications.

Atomic Physics
The rubidium atomic clock and basic research

James Camparo

DOI: https://doi.org/10.1063/1.2812121

IF: 3.5

2007-11-01

Physics Today

Abstract:The vapor-cell atomic clock finds application today in the global positioning system and telecommunications. To improve and miniaturize the humble device for future applications will require a deeper understanding of atomic and chemical physics.

physics, multidisciplinary
Measuring time with stationary quantum clocks

Sergii Strelchuk,Mischa P. Woods

DOI: https://doi.org/10.48550/arXiv.2106.07684

2021-09-22

Abstract:Time plays a fundamental role in our ability to make sense of the physical laws in the world around us. The nature of time has puzzled people -- from the ancient Greeks to the present day -- resulting in a long running debate between philosophers and physicists alike to whether time needs change to exist (the so-called relatival theory), or whether time flows regardless of change (the so-called substantival theory). One way to decide between the two is to attempt to measure the flow of time with a stationary clock, since if time were substantival, the flow of time would manifest itself in the experiment. Alas, conventional wisdom suggests that in order for a clock to function, it cannot be a static object, thus rendering this experiment seemingly impossible. Here we show, with the aid of counterfactual measurements, the surprising result that a quantum clock can measure the passage of time even while being switched off, thus lending constructive support for the substantival theory of time.

Quantum Physics,History and Philosophy of Physics
Atomic clock interferometry using optical tweezers

Ilan Meltzer,Yoav Sagi

2024-08-23

Abstract:Clock interferometry refers to the coherent splitting of a clock into two different paths and recombining in a way that reveals the proper time difference between them. Unlike the comparison of two separate clocks, this approach allows testing how non-flat spacetime influences quantum coherence. Atomic clocks are currently the most accurate time keeping devices. Here we propose using optical tweezers to implement clock interferometry. Our proposed clock interferometer employs an alkaline-earth-like atom held in an optical trap at the magic wavelength. Through a combination of adiabatic, tweezer-based, splitting and recombining schemes and a modified Ramsey sequence on the clock states, we achieve a linear sensitivity to the gravitational time dilation. Moreover, the measurement of the time dilation is insensitive to relative fluctuations in the intensity of the tweezer beams. We analyze the tweezer clock interferometer and show that it is feasible with current technological capabilities. The proposed interferometer could test the effect of gravitational redshift on quantum coherence, and implement the quantum twin paradox.

Quantum Physics,Quantum Gases,General Relativity and Quantum Cosmology,Atomic Physics
The unit of time: present and future directions

S. Bize

DOI: https://doi.org/10.1016/j.crhy.2019.02.002

2019-10-27

Abstract:Some 50~years ago, physicists, and after them the entire world, started to found their time reference on atomic properties instead of motions of the Earth that have been in use since the origin. Far from being an arrival point, this decision marked the beginning of an adventure characterized by a 6 orders of magnitude improvement in the uncertainty of realization of atomic frequency and time references. Ever progressing atomic frequency standards and time references derived from them are key resources for science and for society. We will describe how the unit of time is realized with a fractional accuracy approaching $10^{-16}$ and how it is delivered to users via the elaboration of the international atomic time. We will describe the tremendous progress of optical frequency metrology over the last 20~years which led to a novel generation of optical frequency standards with fractional uncertainties of $10^{-18}$. We will describe work toward a possible redefinition of the SI second based on such standards. We will describe existing and emerging applications of atomic frequency standards in science.

Atomic Physics
Systematic evaluation of an atomic clock at 2e-18 total uncertainty

T.L. Nicholson,S.L. Campbell,R.B. Hutson,G.E. Marti,B.J. Bloom,R.L. McNally,W. Zhang,M.D. Barrett,M.S. Safronova,G.F. Strouse,W.L. Tew,J. Ye

DOI: https://doi.org/10.1038/ncomms7896

2015-05-07

Abstract:The pursuit of better atomic clocks has advanced many research areas, providing better quantum state control, new insights in quantum science, tighter limits on fundamental constant variation, and improved tests of relativity. The record for the best stability and accuracy is currently held by optical lattice clocks. This work takes an important step towards realizing the full potential of a many-particle clock with a state-of-the-art stable laser. Our 87Sr optical lattice clock now achieves fractional stability of 2.2e-16 at 1 s. With this improved stability, we perform a new accuracy evaluation of our clock, reducing many systematic uncertainties that limited our previous measurements, such as those in the lattice ac Stark shift, the atoms' thermal environment, and the atomic response to room-temperature BBR. Our combined measurements have reduced the total uncertainty of the JILA Sr clock to 2.1e-18 in fractional frequency units.

Atomic Physics
Past, present and future of atomic clocks for GNSS

Bernardo Jaduszliwer,James Camparo

DOI: https://doi.org/10.1007/s10291-020-01059-x

2021-01-01

GPS Solutions

Abstract:Global Navigation Satellite Systems (GNSS) are enabled by atomic clocks, which provide the timing precision and accuracy required for the ranging measurements. Significant investments have been made and will continue to be made, to improve GNSS atomic clock technology and reduce the signal-in-space user range error. After providing a baseline by reviewing current GNSS satellite atomic clock technology, we discuss how far, and in what directions, atomic clock technology should be pushed to provide maximum benefits to GNSS performance, reliability and cost.

remote sensing
The Sr Optical Lattice Clock at JILA: A New Record in Atomic Clock Performance

Travis Nicholson,Benjamin Bloom,Jason Williams,Scott Campbell,Michael Bishof,Xibo Zhang,Wei Zhang,Sarah L. Bromley,Ross B. Hutson,Rees McNally,Jun Ye

2014-01-01

Abstract:Submitted for the DAMOP14 Meeting of The American Physical Society The Sr optical lattice clock at JILA: A new record in atomic clock performance TRAVIS NICHOLSON, BENJAMIN BLOOM, JASON WILLIAMS, SARA CAMPBELL, MICHAEL BISHOF, XIBO ZHANG, WEI ZHANG, SARAH BROMLEY, ROSS HUTSON, REES MCNALLY, JUN YE, JILA — The exquisite control exhibited over quantum states of individual particles has revolutionized the field of precision measurement, as exemplified by highly accurate atomic clocks. Optical clocks have been the most accurate frequency standards for the better part of a decade, surpassing even the cesium microwave fountains upon which the SI second is based. Two classes of optical clocks have outperformed cesium: singleion clocks and optical lattice clocks. Historically ion clocks have always been more accurate, and the precision of ion clocks and lattice clocks has been comparable. For years it has been unclear if lattice clocks can overcome key systematics and become more accurate than ion clocks. In this presentation I report the first lattice clock that has surpassed ion clocks in both precision and accuracy. These measurements represent a tenfold improvement in precision and a factor of 20 improvement in accuracy over the previous best lattice clock results. This work paves the way for a better realization of SI units, the development of more sophisticated quantum sensors, and precision tests of the fundamental laws of nature. Travis Nicholson JILA Date submitted: 31 Jan 2014 Electronic form version 1.4
Optical atomic clock comparison through turbulent air

Martha I. Bodine,Jean-Daniel Deschênes,Isaac H. Khader,William C. Swann,Holly Leopardi,Kyle Beloy,Tobias Bothwell,Samuel M. Brewer,Sarah L. Bromley,Jwo-Sy Chen,Scott A. Diddams,Robert J. Fasano,Tara M. Fortier,Youssef S. Hassan,David B. Hume,Dhruv Kedar,Colin J. Kennedy,Amanda Koepke,David R. Leibrandt,Andrew D. Ludlow,William F. McGrew,William R. Milner,Daniele Nicolodi,Eric Oelker,Thomas E. Parker,John M. Robinson,Stefania Romish,Stefan A. Schäffer,Jeffrey A. Sherman,Lindsay Sonderhouse,Jian Yao,Jun Ye,Xiaogang Zhang,Nathan R. Newbury,Laura C. Sinclair

DOI: https://doi.org/10.1103/PhysRevResearch.2.033395

2020-09-12

Physical Review Research

Abstract:The authors compare two state-of-the-art, ytterbium and strontium, optical atomic clocks across a 1.5-km open-air path between two laboratories. The ratio measured across the open air is in agreement with the simultaneous ratio measurement obtained using a conventional noise-cancelled fiber link. [Phys. Rev. Research 2, 033395] Published Fri Sep 11, 2020

Atomic clock keeps ultra-precise time aboard a rocking naval ship

Robust optical clocks promise stable timing in a portable package

Quantum Tech: Squeezing an Optical Atomic Clock Into a Briefcase: A Mind-Set Shift Propelled the Leap from Basic Science to Invention

The Best DIY Quartz Clock Yet > Vastly Superior Timing Tech Comes Home

Demonstration of a Mobile Optical Clock Ensemble at Sea

Atomic clock performance beyond the geodetic limit

Physicists move closer to an ultra-precise 'nuclear' clock

On a New Class of Self-Referencing, 1/τ Atomic Clocks

Timekeepers in Space

Atomic clock performance enabling geodesy below the centimetre level

Breakthrough promises new era of ultraprecise nuclear clocks

Demonstration of a trapped-ion atomic clock in space

Optical Atomic Clocks

The rubidium atomic clock and basic research

Measuring time with stationary quantum clocks

Atomic clock interferometry using optical tweezers

The unit of time: present and future directions

Systematic evaluation of an atomic clock at 2e-18 total uncertainty

Past, present and future of atomic clocks for GNSS

The Sr Optical Lattice Clock at JILA: A New Record in Atomic Clock Performance

Optical atomic clock comparison through turbulent air