Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Investigation of assessment method of axial crushing force of rake bow for bridge against ship collision

Study on the assessment of axial crushing force of bulbous bow for bridge against ship collision

Experimental Study and Numerical Analysis of A Composite Bridge Structure

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

A review on the assessment methods of bridge against ship collision

Numerical simulation analysis of dynamical performance of equipment protecting from ship-bridge collision

Experimental Testing and Numerical Simulations of Ship Impact on Axially Loaded Reinforced Concrete Piers

Transient Finite Element Simulation Analysis on Dolphin Structural under Ship Collision

STUDY ON SOME KEY PROBLEMS RELATED TO CRANE BEAM-RAIL SYSTEM UNDER WHEEL PRESSURE

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Nonlinear collision simulation on dynamic interaction between ship-bridge

Experimental and numerical investigation on a double hull structure subject to collision

A new analytical model to evaluate ship side collisions with large indentation considering interaction effects between structural components

Experimental Tests and Numerical Simulations of Circular Reinforced Concrete Piers under Ship Impact

Vessel-Bridge Collision Reliability Assessment Based on Structural Dynamic Analysis

Analysis of Train Derailment after Hitting the Pier of Tongling Yangtze River Bridge Combined Road with Railway

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Quasi-Static Characteristics Analysis for Barge Bow Structure Based on Experimental and FEA Study

Evaluation of a novel steel box-soft body combination for bridge protection against ship collision