Abstract:We propose a novel all fiber Mach-Zehnder interferometer (MZI) based on photonic crystal fiber (PCF) filled with liquid crystal (LC). The interference between the core mode and the cladding modes of a PCF is utilized. To excite the cladding modes, a region is formed using fiber fusion splicer. Due to the fact that varying effective index difference between the core region and the LC-filled cladding region can cause different transmission spectra, we mainly study the MZIs with different LC-filled structures and different lengths of LC filling. The measured results demonstrate that quite clear interference spectra can be obtained. Through analysis spatial frequency spectrum and temperature spectrum of two MZIs with different LC-filled structures, we can obtain that the MZI with adjacent two LC-filled holes has clearer interference spectrum and higher temperature sensitivity. Thus we choose this MZI to measure the temperature sensitivity with different lengths of LC filling. When the length of LC filling is 2 cm, the temperature sensitivities can be enlarged to 1.59 nm/degrees C. The interferometer shows a good temperature tunability and sensitivity, which can be a good candidate for a highly tunable optical filtering and temperature sensing applications.

Fiber in-line Mach–Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

Fiber in-line Mach-Zehnder interferometer based on near-elliptical core photonic crystal fiber for temperature and strain sensing.

Fiber in-line Mach-Zehnder interferometer based on a pair of short sections of waveguide

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

Optical Fiber Mach-Zehnder Interferometer Based on a Pair of Microholes

Simple In-Line M–Z Interferometer Based on Dual-Core Photonic Crystal Fiber

A Novel Mach–Zehnder Interferometer Based on Hybrid Liquid Crystal–Photonic Crystal Fiber

Femtosecond laser inscribed straight waveguide in no-core fiber for in-line Mach–Zehnder interferometer construction

In-line Mach-Zehnder Interferometer Composed of Microtaper and Long-Period Grating in All-Solid Photonic Bandgap Fiber

Optical Fiber Internal-Mirror-based Fiber In-Line Mach-Zehnder Interferometer

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

In-Fiber M-Z Interferometer Based on Cascaded Long Period Gratings in Embedded-Core Fiber

Femtosecond laser-inscribed fiber interface Mach–Zehnder interferometer for temperature-insensitive refractive index measurement

Fiber Inline Michelson Interferometer Fabricated by A Femtosecond Laser

Photonic Crystal Fiber Based M-Z Interferometer for Refractive Index Measurement

Photonic crystal all-fiber Mach-Zehnder Interferometer sensor based on phase demodulation

Selectively Infiltrated Photonic Crystal Fiber With Ultrahigh Temperature Sensitivity

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

A Novel Mach-Zehnder Interferometer Based on Hybrid Liquid Crystal-Photonic Crystal Fiber

A High Sensitivity Refractive Index Sensor Based on Photonic Crystal Fibre Mach–Zehnder Interferometer