Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

Femtosecond laser assisted selective infiltration of dual-core photonic crystal fiber

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Infiltrated Photonic Crystal Fibers for Sensing Applications

Optofluidics in Photonic Crystal Fibers

Overview of photonic devices based on functional material-integrated photonic crystal fibers

Fiber in-line Mach–Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Advances in Silica-Based Large Mode Area and Polarization-Maintaining Photonic Crystal Fiber Research

Selectively Infiltrated Photonic Crystal Fiber With Ultrahigh Temperature Sensitivity

Integrated Hollow-Core Fibers for Nonlinear Optofluidic Applications

An Efficient Non-Invasive Method to Fabricate In-Fiber Microcavities Using a Continuous-Wave Laser

Coupling Characteristics of Selective-Infiltration-Based Locally Tapered Photonic Crystal Fiber

Ultrathin Lensed Photonic Crystal Fibers with Wide Bandwidth and Long Working Distances

Double-clad photonic crystal fibre for two-photon microscopy

Hybrid photonic-crystal fiber

Refractive index sensing and filtering characteristics of micro-channels photonic crystal fiber

Surface plasmon resonance (SPR)-based D-shaped photonic crystal fiber polarization filter and refractive index sensor with a hexagonal pore structure