Abstract:Purpose This study examined the wear comfort and thermal insulation properties of Al 2 O 3 /graphite particle-imbedded sheath/core and dispersed fabrics via a thermal manikin experiment. Design/methodology/approach Al 2 O 3 /graphite sheath/core and dispersed polyethylene terephthalate (PET) yarn (POY 120d/24f) were spun using a pilot melt bi-component conjugated spinning machine, which was texturized as 75d/24f on the belt-type texturing machine. The woven fabric specimens were made using nylon 70d/34f in the warp with three types of weft yarn: Al 2 O 3 /graphite sheath/core, dispersed and regular PET yarns. Thermal insulation properties were measured and compared in terms of the heat retention rate (I) by KES-F7 apparatus and the maximum surface temperature by light heat emission equipment, as verified by the emissivity of various fabric specimens by far-infrared ray experiment. In addition, this study examined the thermal insulation (Clo value) characteristics of the clothes made of Al 2 O 3 /graphite sheath/core and dispersed fabrics using a thermal manikin apparatus, which were compared with the properties of regular PET clothing. Findings The thermal insulation of the dispersed fabric was superior to that of the sheath/core fabric, which was tentatively attributed to the higher emissivity of the dispersed yarn with Al 2 O 3 /graphite particles distributed over the whole yarn cross-section than that from the core of the sheath/core yarn. This result for the clothing measured using a thermal manikin was consistent with the higher heat retention rate (I) and the maximum surface temperature of the dispersed fabric than that of the sheath/core fabric. In addition, the thermal insulation of the dispersed and sheath/core fabrics was superior to that of the regular PET fabric, which revealed that the Al 2 O 3 /graphite particles imbedded in the dispersed and sheath/core yarns exerted a greater effect on the heat storage and release characteristics compared to that of the TiO 2 particles in regular PET yarn. The Clo values of the dispersed and sheath/core fabrics under the light-on condition were much higher than those under the light-off condition, and furthermore, the difference of the Clo value between the sheath/core and regular PET fabrics under light-on condition was approximately 1.7 times greater than that under the light-off condition. These results revealed that the far-infrared rays emitted from the Al 2 O 3 /graphite particles imbedded in the sheath/core and dispersed yarns enhance the heat storage and release characteristics from the fabric under the light-on condition, i.e. under the sunlight. Originality/value The previously examined thermal wear comfort properties of the various inorganic particle-imbedded fabrics were measured with the fabric state, not clothing, which could not provide objective data related to the actual wearing performance of clothing.

Thermophysiological comfort and objective hand properties of modal, Naia™, cashmere and cotton included denim fabrics

Thermal Comfort Properties of 100% Cashmere Knitted Fabrics

Designing Textile Architectures for High Energy-Efficiency Human Body Sweat- and Cooling-Management

Comparing Sensorial Comfort Properties of Cotton, Cotton/Linen and Linen Knitted Fabrics

Advancements in Cotton Textile Design: Addressing Temperature and Moisture Challenges

Evaluating the Comfort Properties of Single Jersey Knitted Fabrics

Evaluation of moisture management properties on knitted fabrics

Moisture Vapor Permeability and Thermal Wear Comfort of Ecofriendly Fiber-Embedded Woven Fabrics for High-Performance Clothing

Objective and subjective evaluations of quilted mattress ticking fabrics for their thermal comfort performances

Bending and Shear Property of Fabrics Produced from Trevira CS and Its Blends

Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics

Determining Tactile Comfort of Cellulose-Based Woven Fabrics, Knitted Fabrics and Terry Towels Using a Novel Instrument

Effect of knitting structure and dyeing process on drying time, air and vapor permeability

Evaluation of Comfort and Handle Behavior of Mulberry Silk Waste/Wool Blended Fabrics for End Use

Wear comfort and thermal insulation of ceramic-imbedded fabrics with different yarn structures by thermal manikin experiment

Study on the thermo-physiological comfort properties of cotton/polyester combination yarn-based double-layer knitted fabrics

New Trends in Fibers Used in Denim Fabric Production

Thermo-physiological Comfort Performance of Recycled Plain Knitted Fabrics Produced from Acrylic Waste Fiber with the Effects of Incorporated Covered and PBT Elastic Yarns

The Role of Yarn Counts and Polyester/Cotton Blends in Comfort of Knitted Fabric

Enhanced thermoregulation performance of knitted fabrics using phase change material incorporated thermoplastic polyurethane and cellulose acetate nanofibers