Abstract:Uncomfortable feelings during wear highly affect human health, work efficiency, and mental satisfaction. This study evaluated the thermal comfort of woven fabrics made from 16Ne ring and rotor spun weft yarns(x 1 ). The other variables involved are warp tensions (x 2 ) of 1 kilo newton (KN) and 2 kN, weft tensions (x 3 ) of PFT/B- and PFT/B+T, and weft densities (x 4 ) of 14 picks per centimeter (PPC) and 18 PPC. Comfort properties such as thermal conductivity, thermal insulation, and air permeability were measured and analyzed. The fabric produced from rotor-spun weft yarn showed better thermal comfort properties than the fabric made from ring-spun weft yarn. The results of the analysis revealed that when warp and weft yarn tension increased and weft density decreased, thermal conductivity and air permeability also increased. However, thermal insulation of the fabric decreased as yarn tension increased. On the other hand, as the weft density increased, the thermal insulation of the fabric increased. Air permeability increased as weft tension increased from PFT/B- to PFT/B+T and it decreased as weft density increased from 14 PPC to 18PPC. The maximum thermal conductivity and minimum thermal resistance were attained at 14 PPC weft density and ring-spun weft yarn. 佩戴过程中的不适感会极大地影响人类健康、工作效率和心理满意度. 本研究评估了由16Ne环锭和转杯纺纱纬纱(x1)制成的机织物的热舒适性. 其他涉及的变量包括1千牛顿(KN)和2千牛顿(KN)的经纱张力(x2)、PFT/B-和PFT/B+T的纬纱张力(x3),以及每厘米14根纬纱(PPC)和18根纬纱的纬纱密度(x4). 对导热性、隔热性和透气性等舒适性进行了测量和分析. 由转杯纺纬纱制成的织物显示出比环锭纺纬纱制成织物更好的热舒适度. 分析结果表明,当经纱和纬纱张力增加,纬纱密度降低时,热导率和透气性也会增加. 然而,随着纱线张力的增加,织物的隔热性能降低。另一方面,随着纬纱密度的增加,织物的隔热性能也随之提高. 透气性随着纬纱张力从PFT/B-增加到PFT/B+T而增加,随着纬纱密度从14PPC增加到18PPC而降低. 在14PPC纬纱密度和环锭纺纱时,获得了最大的导热系数和最小的热阻.

The Role of Yarn Counts and Polyester/Cotton Blends in Comfort of Knitted Fabric

Effect of cotton‐polyester composite yarn on the physico‐mechanical and comfort properties of woven fabric

Study of Thermal Comfort Characteristics of Bi-layer Knitted Fabrics Made by Various Types of Spinning System Yarns

The Influence of Yarn and Knit Structure on Comfort Properties of Sportswear Fabric

Study on the thermo-physiological comfort properties of cotton/polyester combination yarn-based double-layer knitted fabrics

Effect of knitting structure and dyeing process on drying time, air and vapor permeability

Optimization of the Tencel/Cotton and Polyester/Recycled Polyester Blended Knitted Fabrics to Replace CVC Fabric

Study of Thermal Comfort Properties on Socks made from Recycled Polyester/Virgin Cotton and its Blends

Influence of fabric structure and finishing pattern on the thermal and moisture management properties of unidirectional water transport knitted polyester fabrics

Effect of knitting structure and yarn composition on thermal comfort properties of bi-layer knitted fabrics

A comprehensive study on physical properties of Jacquard knitted camouflage

Investigation of comfort characteristics of knitted fabric produced from neppy yarn

Thermal Comfort Properties of 100% Cashmere Knitted Fabrics

Evaluating the Comfort Properties of Single Jersey Knitted Fabrics

A Comprehensive Analysis of Moisture Management and Geometric Properties in Knitted Fabrics for Enhanced Sportswear Performance

Thermo-physiological Comfort Performance of Recycled Plain Knitted Fabrics Produced from Acrylic Waste Fiber with the Effects of Incorporated Covered and PBT Elastic Yarns

Evaluation of Comfort and Handle Behavior of Mulberry Silk Waste/Wool Blended Fabrics for End Use

Yarn Quality Analysis in Non-Cellulosic and Metal Contents of Cotton Fibre of Various Locations

Analyzing the Effect of Yarn Tension, Weft Yarn Type, and Weft Yarn Density on Thermal Resistance, Thermal Conductivity, and Air Permeability of Plain Woven Fabric

An Analysis of the Performance and Comfort Properties of Fire-Protective Material by Using Inherently Fire-Retardant Fibers and Knitting Structures

Objective and subjective evaluations of quilted mattress ticking fabrics for their thermal comfort performances