Abstract:Purpose This study examined the wear comfort and thermal insulation properties of Al 2 O 3 /graphite particle-imbedded sheath/core and dispersed fabrics via a thermal manikin experiment. Design/methodology/approach Al 2 O 3 /graphite sheath/core and dispersed polyethylene terephthalate (PET) yarn (POY 120d/24f) were spun using a pilot melt bi-component conjugated spinning machine, which was texturized as 75d/24f on the belt-type texturing machine. The woven fabric specimens were made using nylon 70d/34f in the warp with three types of weft yarn: Al 2 O 3 /graphite sheath/core, dispersed and regular PET yarns. Thermal insulation properties were measured and compared in terms of the heat retention rate (I) by KES-F7 apparatus and the maximum surface temperature by light heat emission equipment, as verified by the emissivity of various fabric specimens by far-infrared ray experiment. In addition, this study examined the thermal insulation (Clo value) characteristics of the clothes made of Al 2 O 3 /graphite sheath/core and dispersed fabrics using a thermal manikin apparatus, which were compared with the properties of regular PET clothing. Findings The thermal insulation of the dispersed fabric was superior to that of the sheath/core fabric, which was tentatively attributed to the higher emissivity of the dispersed yarn with Al 2 O 3 /graphite particles distributed over the whole yarn cross-section than that from the core of the sheath/core yarn. This result for the clothing measured using a thermal manikin was consistent with the higher heat retention rate (I) and the maximum surface temperature of the dispersed fabric than that of the sheath/core fabric. In addition, the thermal insulation of the dispersed and sheath/core fabrics was superior to that of the regular PET fabric, which revealed that the Al 2 O 3 /graphite particles imbedded in the dispersed and sheath/core yarns exerted a greater effect on the heat storage and release characteristics compared to that of the TiO 2 particles in regular PET yarn. The Clo values of the dispersed and sheath/core fabrics under the light-on condition were much higher than those under the light-off condition, and furthermore, the difference of the Clo value between the sheath/core and regular PET fabrics under light-on condition was approximately 1.7 times greater than that under the light-off condition. These results revealed that the far-infrared rays emitted from the Al 2 O 3 /graphite particles imbedded in the sheath/core and dispersed yarns enhance the heat storage and release characteristics from the fabric under the light-on condition, i.e. under the sunlight. Originality/value The previously examined thermal wear comfort properties of the various inorganic particle-imbedded fabrics were measured with the fabric state, not clothing, which could not provide objective data related to the actual wearing performance of clothing.

Thermophysiological comfort of sonochemically synthesized nano TiO2 coated woven fabrics

Optimization and development of workwear fabric coated with TiO2 nanoparticles in order to improve thermal insulation properties and air permeability

Utilization of titanium dioxide (TiO2) nanoparticles to improve functionality and mechanical performances of cotton fabric

Nano-TiO2 coated cotton fabrics with temperature regulating properties

Surface modification of cotton-polyester fabric using silica nanoparticles and silica aerogel: UV protection and thermal analysis

Studies on thermal degradation behavior of nano silica loaded cotton and polyester fabrics

Slightly carbomethylated cotton supported TiO 2 nanoparticles as self-cleaning fabrics

Superior Self-cleaning and Antimicrobial Properties on Cotton Fabrics Using Nano Titanium Dioxide along with Green Walnut Shell Dye

Single and hybrid effects of nano‐TiO2 and ‐ZnO particles on multifunctional properties of textiles

Aqueous Sol–Gel Nano-coating of Titanium Dioxide on Cotton and Silk Fabrics for Self-Cleaning and UV Protection Finish

METHODS FOR THE SYNTHESIS OF TiO2 NANOPARTICLES. PROPERTIES OF TEXTILE MATERIALS TREATED WITH TiO2 NANOPARTICLES

Simultaneous synthesis and application of TiO 2 nanoparticles using mulberry leaves for functionalization of organic cotton fabric

Investigation of temperature-responsive and thermo-physiological comfort of modified polyester fabric with Sericin/PNIPAAm/Ag NPs interpenetrating polymer network hydrogel

Thermophysiological comfort and objective hand properties of modal, Naia™, cashmere and cotton included denim fabrics

Investigating the effect of workwear textile modification with nanometal-embedded PMMA polymer by a spray method on textile air permeability, bending stiffness and surface temperature induced by near-infrared

Wear comfort and thermal insulation of ceramic-imbedded fabrics with different yarn structures by thermal manikin experiment

Enhanced antimicrobial performance of textiles coated with TiO2 nanoparticles

Cotton fabric coated with nano TiO2-acrylate copolymer for photocatalytic self-cleaning by in-situ suspension polymerization

Preparation of thermoresponsive cotton fabric by grafting P(MEO2MA-co-OEGMA475-co-GMA) polymer for personal thermal management

Phase Transformation Enabled Textile Triboelectric Nanogenerators for Wearable Energy Harvesting and Personal Thermoregulation