Abstract:Constructing a rational electrode structure for supercapacitors is critical to accelerate the electrochemical kinetics process and thus promote the capacitance. Focusing on the flexible supercapacitor electrode, we synthesized a three-dimensional (3D) porous polypyrrole (PPy) film using a modified vapor phase polymerization method with the use of a porous template (CaCO3). The porous design provided the PPy film with an improved surface area and pore volume. The porous PPy film electrode was studied as a binder-free electrode for supercapacitors. It was found that the abundant interpenetrated pores created by the CaCO3 templates within the 3D framework are beneficial to overcoming the diffusion-controlled limit in the overall electrochemical process. It was revealed by electrochemical investigation that a more pseudocapacitive contribution than diffusion-controlled process contribution was observed in the total charge in the redox reaction. The galvanostatic charge/discharge (GCD) measurements showed that the optimized 3D porous PPy film electrode delivered a high capacitance of 313.6 F g–1 and an areal capacitance of 98.0 mF cm–2 at 1.0 A g–1 in a three-electrode configuration, which is nearly three times that of the dense counterpart electrode synthesized in the absence of the CaCO3 template. A specific capacitance of 62.5 F g–1 at 0.5 A g–1 and 31.1 F g–1 at 10 A g–1 was obtained in a symmetric capacitor device. In addition, the porous structure provided the PPy film with the attractive capability of accommodating the volume change during the doping/dedoping process. This is essential for the PPy film to maintain a long cycling life in a practical operation for a supercapacitor. It turned out that a high capacitance retention up to 81.3% after 10,000 GCD cycles was obtained for the symmetric supercapacitor device with the 3D porous PPy electrode (57.1% capacitive retention was observed for the dense PPy electrode). The strategy and the insight analysis are expected to provide valuable guidance for the design and the synthesis of flexible and wearable film electrodes with high performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03553?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03553</a>.SEM images of CaCO3 particles; digital images of the PPy-1.5 and the dense PPy films; XRD patterns of the PPy-1.5 and the dense PPy films; N2 adsorption/desorption isotherm linear plots, BJH (desorption) pore volume and pore size curves of the PPy-1.5 and the dense PPy films; linear fittings of the peak currents as a function of the scan rates in their corresponding CV curves for various electrodes; b slopes obtained from fitted results; electrochemical measurements of the dense PPy electrode; CV curves of the dense PPy symmetric device; rate performance comparison of the PPy-1.5 and the dense PPy film electrodes; equivalent circuit for the EIS fitting; fitted parameters from Nyquist; and SEM images of the PPy-1.5 film and the dense PPy film disassembled from the devices after the cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03553/suppl_file/am1c03553_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis and performance of binder-free porous carbon electrodes in electrochemical capacitors

Facile synthesis of morphology-controllable NiCo<sub>2</sub>S<sub>4</sub> arrays on activated carbon textile as high-performance binder-free supercapacitor electrode

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

Flexible and porous Co3O4-carbon nanofibers as binder-free electrodes for supercapacitors

Facile synthesis of functionalized porous carbon with three-dimensional interconnected pore structure for high volumetric performance supercapacitors

Synchronous synthesis of electro-exfoliated/oxidized binder-free expanded graphite paper at low potential for solid-state capacitor

Synthesis of microporous carbon nanofibers with high specific surface using tetraethyl orthosilicate template for supercapacitors

Nitrogen-doped Mesoporous Carbon Thin Film for Binder-Free Supercapacitor

Cellulose non-woven fabric-derived porous carbon films as binder-free electrodes for supercapacitors

Nitrogen-doped carbon layer on cellulose derived free-standing carbon paper for high-rate supercapacitors

Fabrication of Porous Carbon Nanofibers from Polymer Blends Using Template Method for Electrode-Active Materials in Supercapacitor

The Design of Binder-Free Self-Supporting Carbon Paper Electrode Based on Biomass Derived Hierarchical Porous Carbon/cellulose Nanofibers for Sustainable Flexible Supercapacitors

Ball milling-assisted synthesis and electrochemical performance of porous carbon with controlled morphology and graphitization degree for supercapacitors

Structural Tuning of a Flexible and Porous Polypyrrole Film by a Template-Assisted Method for Enhanced Capacitance for Supercapacitor Applications

Flexible and Binder-Free Hierarchical Porous Carbon Film for Supercapacitor Electrodes Derived from MOFs/CNT.

Capacitive properties of carbon nanofibers derived from blends of cellulose acetate and polyacrylonitrile

Synthesis of multi-branched porous carbon nanofibers and their application in electrochemical double-layer capacitors

Capacitive Properties of the Binder‐Free Electrode Prepared from Carbon Derived from Cotton and Reduced Graphene Oxide

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Economical preparation of high-performance activated carbon fiber papers as self-supporting supercapacitor electrodes