Abstract:Although the weight ratio of electron conductive additives and the binder to porous carbons in the electrode component of electric double-layer capacitors (EDLC) is minimal, however, without them the electrochemical performances of EDLC would decay quickly. In this work, we present a one-step approach for manufacturing a unique conductive carbon material that shows highly connecting hollow structures as well as approximate oxygenated surface groups to create a synergy effect with aqueous binder and the main component, porous carbon. The as-prepared carbon nanospheres (HCNs) were generated from a typical carbon black-PC20 in air (denoted as PC20HT) at mild temperatures ranging from 400 to 700°C for 2-4 h at a massive scale of approximate 1 kg h −1 . The as-prepared PC20HT displays a high specific surface area of 657 m 2 g −1 (the pristine PC20 has 112 m 2 g −1 ) with a pore volume of 0.71 cm 3 g −1 , and an oxygen content of 14.10 wt%. Interestingly, a premixing of PC20HT and porous carbon is required before making the electrode pastes. The well-premixed carbon materials and a water-soluble binder-polyacrylic acid are composed into highly-stable components as EDLC electrodes in an organic electrolyte. As consequently, the PC20HT-assisted electrodes demonstrate highly stable life cycles (charge-discharge behaviors), with a retention rate 82.13 % over 50,000 cycles at a narrow voltage window of 2.5-2.7 V at 0.5 A g −1 when compared to two conventional conductive carbons, BP2000 (68.45 %) and Super P (67.46%). Thermal annealing at 900 °C in Ar reduces the oxygen content of PC20HT to 4.25 wt% (referred to as TPC20HT), increasing the retention rate of life cycle to 88.89 % after the same cycles. TPC20HT-assisted EDLC electrodes exhibit a superior energy density of 34.76 Wh kg −1 , which is higher than CB-BP2000 and Super P-assisted EDLC electrodes. The transforming of structural morphologies as well as the surface oxygenated and graphitic structures of the as-prepared HCS, PC20HT, and TPC20HT were also described before and after long-term cycling. This simple route for producing conductive carbons is applicable in an aqueous binder system for preparing EDLC electrodes with a cost-effective and environmentally friendly approach.

Synchronous synthesis of electro-exfoliated/oxidized binder-free expanded graphite paper at low potential for solid-state capacitor

Facile electro-exfoliation of binder-free expanded graphite paper electrode at low-potential in alkaline environment for all-solid-state capacitor

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

One-step fabrication and capacitive behavior of electrochemical double layer capacitor electrodes using vertically-oriented graphene directly grown on metal

Facile preparation of binder–free electrode for electrochemical capacitors based on reduced graphene oxide composite film

Ball milling-assisted synthesis and electrochemical performance of porous carbon with controlled morphology and graphitization degree for supercapacitors

Synthesis and performance of binder-free porous carbon electrodes in electrochemical capacitors

Paper Supercapacitors by a Solvent-Free Drawing Method

Self-supported nickel cobalt carbonate hydroxide nanowires encapsulated cathodically expanded graphite paper for supercapacitor electrodes

Design and structure optimization of 3D porous graphitic carbon nanosheets for high-performance supercapacitor

Facile Synthesis of Porous Graphene As Binder-Free Electrode for Supercapacitor Application

High areal-capacitance based extremely stable flexible supercapacitors using binder-free exfoliated graphite paper electrode

Economical preparation of high-performance activated carbon fiber papers as self-supporting supercapacitor electrodes

Fabrication of Multi‐Layered Paper‐Based Supercapacitor Anode by Growing Cu(OH)2 Nanorods on Oxygen Functional Groups‐Rich Sponge‐Like Carbon Fibers

Synthesis Of Cu-Doped Vanadium Oxide/Graphene Hybrid Material For High Performance Electrochemical Capacitor

Nitrogen-doped carbon layer on cellulose derived free-standing carbon paper for high-rate supercapacitors

Self-assembled high polypyrrole loading flexible paper-based electrodes for high-performance supercapacitors

An interfacial self-assembly strategy to fabricate graphitic hollow porous carbon spheres for supercapacitor electrodes

Kinetic enhanced bio-derived porous carbon tile laminate paper for ultrahigh-rate supercapacitors

Facile Synthesis of Graphite-Reduced Graphite Oxide Core–Sheath Fiber via Direct Exfoliation of Carbon Fiber for Supercapacitor Application

One-step generation of hollow graphitic carbon nanospheres with suitable oxygenated structures as conductive additives for water-soluble binder in highly stable supercapacitor electrodes