Abstract:In this study, a low-pass filter with coaxial transmission lines is designed and produced. The objective for designing a coaxial low-pass filter was to utilize both low-loss transmission and high breakdown voltage capability for high power microwave applications to enable the suppression of the second harmonic of the 4.4-6 GHz C-Band (C-Band was selected as a proof of concept) signals with minimal insertion loss. Microwave and 3D electromagnetic simulators were used in the filter design. The design was started by establishing an 11 th order Chebyshev low-pass filter prototype giving 0.05 dB ripple. Based on this prototype, a filter circuit consisting of capacitors and inductors as lumped elements was designed. The low and high impedances to be selected for the stepped impedance method, which is the basis of the transition to coaxial transmission lines, were decided and the most suitable impedances for manufacturing was determined. The filter using these impedances and designed with stepped impedance lines was transformed into the filter in which coaxial transmission lines are used. Coaxial transmission lines in the low-pass filter circuit consist of conductors with an insulating material in between. While the insulating material is selected as air in the high impedance sections of the transmission lines, it is PTFE (Polytetrafluoroethylene) with an insulating constant of 2.1 in the low impedance sections. The designed filter was manufactured. The basic properties of the manufactured filter were characterized by using RF measuring devices and compared with the designed filter. The measurements results proved that the frequency responses of the designed filter and the produced filter were very close to each other. Namely, a low-pass filter with a cutoff frequency of 6 GHz, a sharp suppression of about 45 dB at the stopband of 9 GHz and a return loss of 20 dB was designed and produced by using coaxial transmission lines. The novelty in our work can be stated that the - ower handling capability is increased by two techniques. The first one is that the highest transmission line radius preventing the higher order mode excitations is used to decrease the conductor loss. Teflon is covered around the low impedance lines to enhance the dielectric breakdown capability. Teflon inclusion is also used to decrease the practical low impedance level that improves the filter characteristics.

Impedance-matched coplanar-waveguide metal-powder low-pass filters for cryogenic applications

Study on the fabrication of low-pass metal powder filters for use at cryogenic temperatures

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

On-Chip CPW Low-Pass Filter with 50–110 GHz Bandstop in 400 Nm Metal Thickness Technology Towards Lab-Level Ka-Band MMICs

Printed Circuit Board Metal Powder Filters for Low Electron Temperatures

Compact Coplanar Waveguide Low-Pass Filter Using a Novel Electromagnetic Bandgap Structure

Dielectric waveguide setup tested with a superconducting millimeter-wave Fabry-Pérot interferometer at milli-Kelvin temperatures

Characterizing the attenuation of coaxial and rectangular microwave-frequency waveguides at cryogenic temperatures

Impedance Matched Absorptive Thermal Blocking Filters

A Superconducting RF Low-Pass Filter Based on Ti/TiN Artificial Transmission Line for Detector and Qubit Readout

Coaxial Low-Pass Filter Design and Manufacture

400 GHz Easy-Packaging Waveguide Filters Based on Mixed-Mode and Off-Axis Couplings

Impedance-matched low-pass stripline filters

CPW Bandpass Filters with Controllable Passbands

Design of an Ultrawide Stopband HTS LPF Based on Interdigital Hairpin Structure

Intelligent Design and Modeling of Low-loss Millimeter-Wave Wideband Bandpass Filter in InP Technology with Cryogenic Performance Analysis

Cryogenic Microwave Filter Cavity with a Tunability Greater than 5 GHz

Low-Loss 3D-Printed Waveguide Filters Based on Deformed Dual-Mode Cavity Resonators

The flexible bandpass filter on polyimide substrate for wireless communications systems