Abstract:A cryogenic broadband low noise amplifier (LNA) for quantum applications based on a standard 40-nm CMOS technology is reported. The LNA specifications are derived from the readout of semiconductor quantum bits at 4.2 K, whose quantum information signals are characterized as phase-modulated signals. To achieve broadband input matching impedance and low noise figure, the gate-to-drain capacitance of the input transistor is exploited. The goal is to involve a resistive and capacitive load into the input impedance match of a common-source stage with source inductive degeneration. The capacitive load is created by an LC parallel tank whose resonant frequency is lower than the operating frequency. The achieved non-constant in-band equivalent capacitance is proven to be beneficial to input impedance matching. The resistive part of the load is provided by the transconductance of the cascode stage implicitly. An inductor is added to the gate of the cascode transistor to suppress its noise, and a transformer-based resonator with two resonant frequencies serves as the load of the first stage, thus extending the operating bandwidth. Design considerations for the cryogenic temperature operation of the LNA are proposed and analyzed. The LNA achieves a measured gain ( $S_{21}$ ) of 35 ± 0.5 dB, return loss > 12 dB, and NF of 0.75–1.3 dB across the band (4.1–7.9 GHz), with 51.1-mW power consumption at room temperature, while it shows a measured gain of 42 ± 3.3 dB, and NF of 0.23–0.65 dB with 39-mW power consumption at 4.2 K between 4.6 and 8 GHz. To the best of our knowledge, this is the first report of a cryogenic LNA based on a bulk CMOS process working above 4 GHz showing sub-1-dB NF both at room and cryogenic temperatures.

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Engineering the microwave to infrared noise photon flux for superconducting quantum systems

Low-pass filter with ultra-wide stopband for quantum computing applications

Microstrip Filters for Measurement and Control of Superconducting Qubits

Impedance-matched coplanar-waveguide metal-powder low-pass filters for cryogenic applications

Mechanical Purcell Filters for Microwave Quantum Machines

High-impedance superconducting resonators and on-chip filters for circuit quantum electrodynamics with semiconductor quantum dots

Developing high-impedance superconducting resonators and on-chip filters for semiconductor quantum dot circuit quantum electrodynamics

A Superconducting RF Low-Pass Filter Based on Ti/TiN Artificial Transmission Line for Detector and Qubit Readout

High-suppression-ratio and wide bandwidth four-stage Purcell filter for multiplexed superconducting qubit readout

Cascaded Low-Pass Filters for the Measurements of DC Characteristics of Superconducting Qubits

Cryogenic Microwave Filter Cavity with a Tunability Greater than 5 GHz

High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices

Study on the fabrication of low-pass metal powder filters for use at cryogenic temperatures

Broadband Bandpass Purcell Filter for Circuit Quantum Electrodynamics

Thermalization of a flexible microwave stripline measured by a superconducting qubit

Low-loss superconducting aluminum microwave coplanar waveguide resonators on sapphires for the qubit readouts

Characterization of broadband Purcell filters with compact footprint for fast multiplexed superconducting qubit readout

All-optical single-shot readout of a superconducting qubit

A Cryogenic Broadband Sub-1-dB NF CMOS Low Noise Amplifier for Quantum Applications

Materials loss measurements using superconducting microwave resonators