Abstract:<p class="a-plus-plus">Titanium alloy Ti–Al–Nb–Zr has high specific strength and becomes a promising structural material used in the deep sea. The excellent corrosion resistance of the alloy is derived from the protective passive film formed on its surface. By now, full agreement on interpretation of the anti-corrosion performance of the film in marine environment, especially in the deep sea, has not been reached. In this work, the electrochemical performance of two-surface-state Ti–Al–Nb–Zr alloys which are treated by mechanical polishing and anodizing pre-passivation in the simulated shallow sea, 1000 m and 3000 m deep sea environments, is investigated. By interpreting the electrochemical kinetic parameters, it is found that the dominant cathodic process becomes hydrogen evolution in simulated deep sea environments, but the reduction rate is restrained by high hydrostatic pressure, which arrests the passivation of the alloy. Assisted by X-ray photoelectron spectroscopy analysis, it is found that the passive film mainly consists of titanium oxides. There are intermediate oxides with non-stoichiometric ratio involved in the film formation due to the low dissolved oxygen concentration and low temperature. The results of Mott–Schottky and electrochemical impedance show that the film has <em class="a-plus-plus">n</em>-type semiconducting property with oxygen vacancies as the main point defects. The anti-corrosion performance in simulated deep sea environments is one order of magnitude lower than that in the simulated shallow sea environment. However, from 1000 to 3000 m, the corrosion resistance is reduced very slightly. In the inner layers of the passive film and the passive film formed in simulated deep sea environments, the proportion of low-valence titanium oxides is relatively high. The doping of low-valence titanium (Ti(II) or Ti(III)) results in a porous structure and ion permeability of the passive film, as well as relatively low corrosion resistance.</p>

Modification of passive film on Ti–6Al–4V alloy induced by Bacillus vietnamensis

Evaluation of inhibition effect on microbiologically influenced corrosion of Ti-5Cu alloy against marine Bacillus vietnamensis biofilm

Corrosion Resistance of Passive Film Formed on TA10 Dental Implant in Simulated Body Fluid

Marine microbial corrosion inhibitation of an in situ formed oxide coating on Ti56Zr44 alloy

The investigation of Bacillus cereus induced degradation of passive films of 5A06 aluminium alloy in simulated condensate solutions of space station

Preliminary study on biocorrosion inhibition effect of Ti-5Cu alloy against marine bacterium Pseudomonas aeruginosa

Laboratory Investigation of the Microbiologically Influenced Corrosion (MIC) Resistance of a Novel Cu-bearing 2205 Duplex Stainless Steel in the Presence of an Aerobic Marinepseudomonas Aeruginosabiofilm

Laser directed energy deposited, ultrafine-grained functional titanium-copper alloys tailored for marine environments: antibacterial and anti-microbial corrosion studies

Single-cell level investigation of microbiologically induced degradation of passive film of stainless steel via FIB-SEM/TEM and multi-mode AFM

Study on the Bacterial Communities of the Biofilms on Titanium, Aluminum, and Copper Alloys at 5,772 m Undersea in Yap Trench

Influence of Ru-Ni-Nb combined cathode modification on corrosion behavior and passive film characteristics of Ti-6Al-4V Alloy used for oil country tubular goods

Corrosion behavior of 7B04 aluminum alloy under the synergistic effect of Lacticaseibacillus paracasei and Acinetobacter lwoffi

Antibacterial and osteogenic thin films on Ti-6Al-4V surface formed by passivation process in copper hydroxide solution

Inhibiting corrosion of aluminum alloy 5083 through Vibrio species biofilm

Corrosion of Pseudomonas aeruginosa toward a Cu–Zn–Ni alloy inhibited by the simulative tidal region

Electrochemical Performance of Passive Film Formed on Ti–Al–Nb–Zr Alloy in Simulated Deep Sea Environments

Study on Zn-doped antibacterial bioactive coatings on Ti6Al4V titanium alloy surfaces by micro-arc oxidation

Stability of passive film and antibacterial durability of Cu-bearing L605 alloy in simulated physiological solutions

Inhibition of microbial extracellular electron transfer corrosion of marine structural steel with multiple alloy elements

Corrosion behavior and characteristics of passive films of laser powder bed fusion produced Ti–6Al–4V in dynamic Hank’s solution

Low-shear modeled microgravity accelerated the degradation of passive films of aluminium alloy by Bacillus cereus through increased extracellular polymeric substances