Abstract:Many dynamic simulations of a rotor with a journal bearing employ non-linear fluid-film lubrication models and calculate the bearing coefficients at each time step. However, calculating such a simulation is tedious and computationally expensive. This paper presents a simplified dynamic simulation model of a vertical rotor with tilting pad journal bearings under constant and variable (transient) rotor spin speed. The dynamics of a four-shoes tilting pad journal bearing are predefined using polynomial equations prior to the unbalance response simulations of the rotor-bearing system. The Navier–Stokes lubrication model is solved numerically, with the bearing coefficients calculated for six different rotor speeds and nine different eccentricity amplitudes. Using a MATLAB inbuilt function (poly53), the stiffness and damping coefficients are fitted by a two-dimensional polynomial regression and the model is qualitatively evaluated for goodness-of-fit. The percentage relative error (RMSE%) is less than 10%, and the adjusted R-square () is greater than 0.99. Prior to the unbalance response simulations, the bearing parameters are defined as a function of rotor speed and journal location. The simulation models are validated with an experiment based on the displacements of the rotor and the forces acting on the bearings. Similar patterns have been observed for both simulated and measured orbits and forces. The resultant response amplitudes increase with the rotor speed and unbalanced magnitude. Both simulation and experimental results follow a similar trend, and the amplitudes agree with slight deviations. The frequency content of the responses from the simulations is similar to those from the experiments. Amplitude peaks, which are associated with the unbalance force (1 × Ω) and the number of pads (3 × Ω and 5 × Ω), appeared in the responses from both simulations and experiments. Furthermore, the suggested simulation model is found to be at least three times faster than a classical simulation procedure that used FEM to solve the Reynolds equation at each time step.

Gyroscopic rotor dynamics simulation with anisotropy of elastic and damping characteristics of the support

Resonant vibrations of a non-ideal gyroscopic rotary system with nonlinear damping and nonlinear stiffness of the elastic support

Effects of Nonlinear Damping Suspension on Nonperiodic Motions of a Flexible Rotor in Journal Bearings

Experimental investigation for the dynamic mechanical properties of a vertical anisotropically supported rotor

The prediction of the non-linear dynamics of a squeeze-film damped aero-engine rotor housed in a flexible support structure

ANALYSIS OF THE MULTIPLE-SOLUTION RESPONSE OF A FLEXIBLE ROTOR SUPPORTED ON NON-LINEAR SQUEEZE FILM DAMPERS

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Dynamic analysis of the variable stiffness support rotor system with elastic rings

Nonlinear dynamic of flexible rotor supported by turbulent bearings with quadratic damping and temperature dependent viscosity

General dynamic model of aeroengine's rotor system during maneuvering flight

Stability Behaviour Of An Isotropic Rotor System Anisotropically Mounted And Partially Filled With Inviscous Fluid

Stability of a Rotor System on Support of Anisotropical Rigidity and Partially Filled with an Inviscid Fluid

Effect of a parametric damping on nonlinear dynamics of a symmetric heavy gyroscope

Speed-Dependent Bearing Models for Dynamic Simulations of Vertical Rotors

Analytical approach to the stepped multi-span rotor-bearing system with isotropic elastic boundary conditions

Dynamic Analysis and Modeling of Large-scale Canned Motor Pump Rotor Based on ANSYS

Stability and modal analysis of an unbalanced asymmetric multi-disk rotor system on bearings as viscoelastic substrate

Nonlinear Analysis of Stability and Rotational Accuracy of an Unbalanced Rotor Supported by Aerostatic Journal Bearings

Study on Vibration and Bifurcation of an Aeroengine Rotor System with Elastic Ring Squeeze Film Damper

A 3d Finite Element-Based Model Order Reduction Method for Parametric Resonance and Whirling Analysis of Anisotropic Rotor-Bearing Systems

Nonlinear dynamics of rotor of an auto-balancing ball device, considering eccentricity and changes in horizontal axes of rotation