Abstract:Many dynamic simulations of a rotor with a journal bearing employ non-linear fluid-film lubrication models and calculate the bearing coefficients at each time step. However, calculating such a simulation is tedious and computationally expensive. This paper presents a simplified dynamic simulation model of a vertical rotor with tilting pad journal bearings under constant and variable (transient) rotor spin speed. The dynamics of a four-shoes tilting pad journal bearing are predefined using polynomial equations prior to the unbalance response simulations of the rotor-bearing system. The Navier–Stokes lubrication model is solved numerically, with the bearing coefficients calculated for six different rotor speeds and nine different eccentricity amplitudes. Using a MATLAB inbuilt function (poly53), the stiffness and damping coefficients are fitted by a two-dimensional polynomial regression and the model is qualitatively evaluated for goodness-of-fit. The percentage relative error (RMSE%) is less than 10%, and the adjusted R-square () is greater than 0.99. Prior to the unbalance response simulations, the bearing parameters are defined as a function of rotor speed and journal location. The simulation models are validated with an experiment based on the displacements of the rotor and the forces acting on the bearings. Similar patterns have been observed for both simulated and measured orbits and forces. The resultant response amplitudes increase with the rotor speed and unbalanced magnitude. Both simulation and experimental results follow a similar trend, and the amplitudes agree with slight deviations. The frequency content of the responses from the simulations is similar to those from the experiments. Amplitude peaks, which are associated with the unbalance force (1 × Ω) and the number of pads (3 × Ω and 5 × Ω), appeared in the responses from both simulations and experiments. Furthermore, the suggested simulation model is found to be at least three times faster than a classical simulation procedure that used FEM to solve the Reynolds equation at each time step.

Nonlinear dynamics of rotor of an auto-balancing ball device, considering eccentricity and changes in horizontal axes of rotation

Rotor dynamics with account for the eccentricity and angular error of the ball self-balancing device

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Multi-row self-balancing device with regard to eccentricity and angular error

Review of Nonlinear Rotor-Bearing Dynamics System

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Effects of Nonlinear Damping Suspension on Nonperiodic Motions of a Flexible Rotor in Journal Bearings

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Study on Nonlinear Dynamic Response of an Unbalanced Rotor Supported on Ball Bearing

Nonlinear Dynamic Behaviors of an Imbalance Rotor on Multi-Lobe Bearings

Analysis of Nonlinear Phenomena in High Speed Ball Bearings due to Radial Clearance and Unbalanced Rotor Effects

Study on the Dynamic Response of an Unbalanced Rotor System Supported by Ball Bearings

Nonlinear Analysis of Stability and Rotational Accuracy of an Unbalanced Rotor Supported by Aerostatic Journal Bearings

Off-axis vibration-elimination system of eccentric rotors with use of multiple automatic ball balancers

On-line Unbalance Identification of Flexible Rotor System

Response Analysis Of A Linear Rotor-Bearing System Under Combined Non-Stationary Seismic And Harmonic Excitations

General dynamic model of aeroengine's rotor system during maneuvering flight

Effect of an unbalanced rotor on dynamic characteristics of double-row self-aligning ball bearing

Speed-Dependent Bearing Models for Dynamic Simulations of Vertical Rotors

A New Nonlinear Dynamic Model of the Rotor-Bearing System Considering Preload and Varying Contact Angle of the Bearing