Abstract:Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorisation to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South African CFA was subjected to wet, magnetic separation and subsequent zeolitisation of the nonmagnetic fraction (NMF); solid products were characterised by XRD, SEM, XRF and LA-ICP-MS. The wet, magnetic separation process resulted in the partitioning of a specific set of transition metals (such as Fe, Mn, Cr, V, Ni, Zn, Cu, Co and Mo) into the magnetic fraction (MF) of CFA, while REEs partitioned into the NMF with a total REE content of 530.2 ppm; thus, the matrix elements of CFA were extracted with ease. Zeolitisation resulted in a solid zeolite product (hydroxysodalite) with a total REE content of 537.6 ppm. The process of zeolitisation also resulted in the selective enrichment of Ce (259.1 ppm) into the solid zeolite product (hydroxysodalite), while other REEs were largely partitioned into the liquid phase. CFA valorisation by wet, magnetic separation and zeolitisation therefore allowed for the partitioning of REEs into various extraction products while recovering the matrix elements of CFA such as Fe, Si and Al. The findings of this study highlight the geopolitical importance of REEs in terms of the development of alternative processes for REE recovery from waste and alternative sources, which may potentially give countries that employ and develop the technology a key advantage in the production of REEs for the global market.

An Assessment of South African Chromite Sand Crushing Ratio

Assessment of South African Chromite Sand for Binder Jetting Application

Effective Laboratory Method of Chromite Content Estimation in Reclaimed Sands

Characterization of Foundry Waste Sand Streams for Recycling Applications in Construction Industry

Ophiolite Chromite Deposits as a New Source for the Production of Refractory Chromite Sands

Characterization and Processing of Low-Grade Middle Group 2 Chromite Ore by Gravity Shaking Table and a Comparative SLon Magnetic Separation: A Case Study

Investigations on Physical and Chemical Properties of High Silica Sand, Fe-Cr Slag and Blast Furnace Slag for Foundry Applications

Effect of silica concentration on degree of sintering of chromite-silica ladle well filler sand based on South African raw materials

Valorization From Waste: Combined Reduction of Chromite Ore Processing Tailing and Sub-Grade Manganese Ore to Produce 200 Series Stainless Steel Scrap

Comparative Studies of Microstructural, Mechanical and Tribological behaviour of A319 alloy cast in solid waste mold and conventional sand Mold

Influence of Chromite Ore Selection on the Pelletized Oxidative Sintering Process: A South African Case Study

Copper Slag as an Alternative to Silica Sand for A356 Alloy Casting-Feasibility Study

Mechanism of the Direct Reduction of Chromite Process as a Clean Ferrochrome Technology

Ferrochrome Production in a Submerged Electric Arc Furnace: Fundamental Analysis Based upon the FactSage‐Macro Program Approach

Contribution to the study of an eco-sand concrete containing recycled sands from waste granite and recycled clinker

The Behaviour of Rare Earth Elements from South African Coal Fly Ash during Enrichment Processes: Wet, Magnetic Separation and Zeolitisation

Evaluation of Functional, Microstructural, Environmental Impact, and Economic Performance of Concrete Utilizing Ferrochrome Ash and Slag

Iron and Steel Castings and Core Production Results from Finer Grades of Chromite Sand in Shell Applications

Economic and Environmental Aspects of Applying the Regeneration of Spent Moulding Sand

A New Method (Ball Milling and Sodium Sulfide) for Mechanochemical Treatment of Soda Ash Chromite Ore Processing Residue