Abstract:JSC “Cheboksary Aggregate Plant” has mastered the production of high-strength gray cast iron "wedge friction" railway castings (grade SCH30) intended for freight wagon bogies. According to the casting's technical specifications, the presence of interdendritic graphite and cementite in the vertical and sloping walls of the casting is not allowed. However, in separate batches, interdendritic graphite and up to 10 % cementite were found in the controlled walls of the castings. To solve the problem of obtaining castings with a blemish-free microstructure, the iron modification technology was changed. Instead of ferrosilicon FS 75, a more effective composite dispersed inoculant was developed and implemented. The advantages of the latter, which consisted of chemically treated ultrafine modifier (USM) and a by-product of organosilane production (KSM), were theoretically substantiated. The advantages of the developed modifier over FS75 were confirmed by modeling the behavior of inoculant’s particles when filling the “wedge friction” cavities in the FLOW-3D program. USM and KSM particles were evenly distributed throughout the volume of the castings at all observed heights of the controlled casting walls. They served as graphite crystallization centers throughout the solidification time of the castings, ensuring the absence of blemishes in the castings. The introduction of the developed material into production allowed reducing the modifier consumption by 6.25 times, ensuring the absence of blemishes in the castings, achieving the required mechanical properties of the iron, and an economic effect of over 4 million rubles

Iron and Steel Castings and Core Production Results from Finer Grades of Chromite Sand in Shell Applications

Ophiolite Chromite Deposits as a New Source for the Production of Refractory Chromite Sands

Effect of Chromite-Silica Sands Characteristics on Performance of Ladle Filler Sands for Continuous Casting

Development of a New Ferrous Aluminosilicate Refractory Material for Investment Casting of Aluminum Alloys

Trials on a Zircon Sand Substitute for Surface Layer in Shell-making

Effective Laboratory Method of Chromite Content Estimation in Reclaimed Sands

Sintering Behavior of New Chromite-Alumina Mixed Ladle Filler Sands for High Mn-High Al Steel Grades

Study and Application on No Bake Phosphate High Chromite-Corundum Sand

Effect of silica concentration on degree of sintering of chromite-silica ladle well filler sand based on South African raw materials

Surface Alloying of Internal Surfaces of Low‐Carbon Steel Castings through Incorporation of Nickel, Nickel and Chromium, and 316L Stainless Steel Powders to Mold and Core Surfaces

Compound Castings for the Coke Industry

Data-Driven Process Analysis for Iron Foundries with Automatic Sand Molding Process

Free Opening Performance of Steel Ladle as a Function of Filler Sand Properties

Production and evaluation of cast-to-form forging dies in a special cast steel

Theory and practice of inoculation for high-grade gray cast iron railway castin

An Assessment of South African Chromite Sand Crushing Ratio

An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process

Continuous Casting Practices for Steel: Past, Present and Future