Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

On-chip broadband Mach-Zehnder interferometer based on a broadband taper-section phase shifter

Thin‐Film‐Lithium‐Niobate Photonic Chip for Ultra‐Wideband and High‐Precision Microwave Frequency Measurement

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Broadband Waveguide Chip Design with Phase Measurement Function for Enhancing Optical Interferometric Imaging

Broadband Opto-Mechanical Phase Shifter for Photonic Integrated Circuits

Narrow-Band Add-Drop Filter Based on Phase-Modulated Grating-Assisted Contra-Directional Couplers

Optical fiber in-line Mach-Zehnder interferometer based on down-up tapers for refractive index measurement

Broadband SiN Interleaver With a Ring Assisted MZI Using a Tapered MMI Coupler

Monolithic Integration of Tunable V-coupled-cavity Laser and Mach-Zehnder Modulator on Generic InP Platform

On-Chip Broadband, Compact TM Mode Mach–Zehnder Optical Isolator Based on InP-on-Insulator Platforms

A Tunable Broadband Photonic RF Phase Shifter Based on a Silicon Microring Resonator

Broadband 2 × 2 multimode-interference coupler on the silicon-nitride platform

Ultra-Compact and Temperature-Insensitive Mach-Zehnder Interferometer Based on One Multimode Waveguide on Silicon

Improved Mach-Zehnder Interferometer With Micro-Ring-Resonator-Based Two-Beam Interferometer

Broadband Silicon Nitride Multi-Mode Interferometer with Sub-Wavelength Gratings

On-Chip High Extinction Ratio Single-Stage Mach-Zehnder Interferometer Based on Multimode Interferometer

60.5 Db Silicon Mach-Zehnder Interferometer Using Self-Optimising Beam-Splitters

Polarization-insensitive Silicon Oxynitride Mach-Zehnder Interferometers for LAN-WDM

A Nonsymmetrical Mach-Zehnder Interferometer for Suppressing Pattern Effect in SOAs

Silicon nitride thermo-optic on-chip Mach-Zehnder interferometer at visible wavelengths

Broadband and fabrication-tolerant 3-dB couplers with topological valley edge modes