Abstract:Nanofluid injection into oil reservoirs is a novel chemical enhanced oil recovery (EOR) method and has been the subject of many researches in recent years. Despite its increasing applications, there is not enough information on the mechanisms and microscopic aspects of nanoparticle performance in EOR processes. Among nanoparticles, Janus nanoparticles (JNPs), which have two distinct hydrophilic and hydrophobic sides, can play an effective role in oil recovery enhancement applications. In the present study, molecular dynamics (MD) simulations were performed to provide a molecular-scale insight into the working mechanisms of silica Janus nanoparticles in oil recovery enhancement by considering the presence of sodium, chlorine, magnesium and sulfate ions. The calcite surface interacts with the mixture of heptane, decane, and toluene as the oil phase. Based on the simulation results, the mechanism of oil detachment from the calcite surface involves several steps. Due to the electrostatic interactions between the nanofluid and the calcite, the formation of a water channel towards the calcite surface begins, and the nanofluid reaches and spreads over the calcite surface, which is influenced by two factors: hydrogen bonds between water and calcite; the presence of ions in the nanofluid, which can increase the hydrophilicity of the calcite surface. Thus, the oil molecules remain as a droplet on the rock surface. Subsequently, the JNPs approach to the oil–water interface near the calcite surface and push the oil droplet upward so that the oil phase completely detaches from the surface. The presence of ionic compounds around the JNPs increases their electrostatic interactions with each other and also increases the probability agglomeration of JNPs, which is a negative factor. On the other hand, they increase the electrostatic interactions of JNPs with calcite, which is a positive factor. Therefore, it is necessary to choose the optimal concentration of the ionic compounds in the injected nanofluid. According to the simulation results, JNPs could increase the viscosity of the water phase by 60% and reduce the surface tension of water–oil by 33%. Under the reservoir temperature and pressure conditions, the diffusion coefficient of 1nm JNPs has increased from 3.33 × 10 –10 to 6.67 × 10 –10 m 2 /s. The results of this study may be useful for designing favorable conditions for nanofluid injection in the EOR applications.

Low-salinity nanofluid – A smart fluid enhanced oil recovery method

Physicochemical properties of JS@GO nanofluid and its potential in enhanced oil recovery

Janus sulfonated graphene oxide nanosheets with excellent interfacial properties for enhanced oil recovery

Preparation and application of nanofluid flooding based on polyoxyethylated graphene oxide nanosheets for enhanced oil recovery

Multiscale study of Janus nanosheets' interfacial activity

Low-salinity water flooding by a novel hybrid of nano γ-Al2O3/SiO2 modified with a green surfactant for enhanced oil recovery

Potential application of novel Janus amphiphilic nanoparticles to improve the viscoelasticity of polymer solution for enhanced oil recovery

Effects of surfactants on dispersibility of graphene oxide dispersion and their potential application for enhanced oil recovery

2D Janus polymer nanosheets for enhancing oil recovery: From material preparation to property evaluation

The foam reinforced with Janus amphiphilic graphene oxide to control steam channeling in heavy oil reservoir

Comprehensive experimental investigation of the effective parameters on stability of silica nanoparticles during low salinity water flooding with minimum scale deposition into sandstone reservoirs

Nanofluid-Induced Wettability Gradient and Imbibition Enhancement in Natural Porous Media: A Pore-scale Experimental Investigation

A Feasibility Study on Enhanced Oil Recovery of Modified Janus Nano Calcium Carbonate-Assisted Alkyl Polyglycoside to Form Nanofluids in Emulsification Flooding

Development and application of amphiphilic carbon nanotube viscosity reduction systems for enhancing oil recovery of heavy oil reservoirs

Janus Silica Nanoparticles at Three-Phase Interface of Oil–Calcite–Electrolyte Water: Molecular Dynamics Simulation

Ethoxylated molybdenum disulphide based nanofluid for enhanced oil recovery

Combined imbibition system with black nanosheet and low-salinity water for improving oil recovery in tight sandstone reservoirs

Mechanisms of Nanofluid Based Modification MoS2 Nanosheet for Enhanced Oil Recovery

Graphene Oxide Nanosheets for Oil Recovery

Study on the preparation of magnetic Janus nanofluids and oil displacement mechanism

Demulsification of Heavy Oil-in-Water Emulsion by a Novel Janus Graphene Oxide Nanosheet: Experiments and Molecular Dynamic Simulations