Abstract:Innovative methods to enhance oil recovery efficiency remain a high priority in the energy sector. This study investigates the potential of magnesium oxide (MgO) nanoparticles, both alone and with sodium dodecyl sulfate (SDS) surfactant, to improve oil recovery by reducing the interfacial tension (IFT) between oil and water. The research focuses on the physicochemical properties of MgO nanoparticles and their efficacy in IFT reduction, critical for Enhanced Oil Recovery (EOR). Preparation of MgO nanofluids was achieved using a Magnetic Stirrer and Sonics Vibracell VCX 750 Ultrasonic Homogenizer to ensure thorough mixing and dispersion. Characterization involved measuring density with Calibrated Density Bottles, dynamic and kinematic viscosity using a Falling Ball Viscometer, pH levels with an Electronic pH meter, and electric potential difference (mV). The Malvern Zetasizer Nano ZS assessed Zeta Potential (mV), Electric Conductivity (mS/cm), and Electrophoretic mobility (µmcm/Vs) for both the nanofluid and the surfactant-nanofluid systems. Paraffin oil served as the oil phase, with nanoparticle (NP) concentrations tested at 0.01, 0.03, 0.05, 0.1, and 0.5 wt%. The SDS concentration remained constant at 0.5 wt% throughout the study. We employed Pendant Drop Interfacial Tension measurements to evaluate the oil-water, oil-nanofluid, and oil-nanofluid + surfactant systems. Significant IFT reduction was observed—from 47.9 to 26.9 mN/m with a 0.1 wt% MgO nanofluid. Even a minimal concentration of 0.01 wt% MgO NP decreased notably from 47.9 to 41.8 mN/m. An IFT reduction of up to 70% was noted when MgO NPs were combined with SDS. This IFT reduction enhances oil mobility, suggesting the MgO-SDS system as an effective EOR technique. The study also recorded shifts in Zeta Potential from −2.54 to 3.45 mV and more alkaline pH levels from 8.4 to 10.8, indicating the nanofluid's altered surface charge and interaction dynamics. These physicochemical changes, aided by SDS, improved the dispersion and stability of MgO nanoparticles at the oil-water interface, thus boosting oil displacement efficiency. These findings highlight the potential of the MgO-SDS system as a cleaner alternative to traditional EOR methods that use toxic chemicals, offering economic benefits from enhanced reservoir performance. However, practical challenges remain, including ensuring nanoparticle stability and compatibility under diverse reservoir conditions, managing surfactant adsorption, and scaling up to field-level operations. Future research must address these issues while maintaining interdisciplinary collaboration and rigorous field studies. In conclusion, incorporating MgO nanoparticles and SDS surfactant presents a promising approach to improving oil recovery efficiency. Further investigation into its field application and economic feasibility is essential to gauge the potential of this technology in the energy industry.

Ethoxylated molybdenum disulphide based nanofluid for enhanced oil recovery

Mechanisms of Nanofluid Based Modification MoS2 Nanosheet for Enhanced Oil Recovery

Laboratory study and field application of amphiphilic molybdenum disulfide nanosheets for enhanced oil recovery

Development of Amphiphilic Janus Molybdenum Disulfide Nanosheets and Their Application for Enhanced Oil Recovery

Synergistic Effect of MgO Nanoparticles and SDS Surfactant on Interfacial Tension Reduction for Enhanced Oil Recovery

Synthetic Method and Oil Displacement Capacity of Nano-MoS2

Synthesis and Characterization of Self-Dispersion Monodisperse Silica-Based Functional Nanoparticles for Enhanced Oil Recovery (EOR) in Low-Permeability Reservoirs

Polymer Nanoparticles Based Nano-Fluid for Enhanced Oil Recovery at Harsh Formation Conditions

Metal oxide-based nanoparticles: revealing their potential to enhance oil recovery in different wettability systems

Evaluating the potential of surface-modified silica nanoparticles using internal olefin sulfonate for enhanced oil recovery

Novel Nano and Bio-Based Surfactant Formulation for Hybrid Enhanced Oil Recovery Technologies

Synthesis of colloidal silica nanofluid and assessment of its impact on interfacial tension (IFT) and wettability for enhanced oil recovery (EOR)

Experimental Investigation of Silica-Based Nanofluid Enhanced Oil Recovery: the Effect of Wettability Alteration

Synthesis and application of eucalyptus plant- and walnut shell- CuO/Fe3O4/Xanthan polymeric nanocomposites for enhanced oil recovery in carbonate reservoirs

Potential Application of Rhamnolipid-Silica Nanoparticle Complex for Enhanced Oil Recovery Studied with Molecular DynamicsSimulations

Effect of the SiO2 Nanoparticle Size on Application of Enhanced Oil Recovery in Medium-Permeability Formations

Preparation and application of nanofluid flooding based on polyoxyethylated graphene oxide nanosheets for enhanced oil recovery

New Technique for Enhancing Residual Oil Recovery from Low-Permeability Reservoirs: The Cooperation of Petroleum Hydrocarbon-Degrading Bacteria and SiO<sub>2</sub> Nanoparticles

Study on the main factors and mechanism of functional silica nanofluid spontaneous imbibition for enhanced oil recovery

Nanofluids of Amphiphilic Kaolinite-Based Janus Nanosheets for Enhanced Oil Recovery: the Importance of Stable Emulsion

A novel nanofluid of modified carbon black nanoparticles for enhanced oil recovery in low permeability reservoirs