Abstract:All- solid-state lithium batteries (ASSLBs) are regarded as the next-generation energy storage devices due to their superior safety and potential high energy density. In ASSLBs, a composite solid electrolyte is the most competitive candidate. The interface between the cathode and composite electrolyte and the interface between ceramic and polymers are important factors affecting the performance of solid-state batteries. The interface between the superionic conductor and polymer electrolyte (polyvinylidene fluoride) was modified by in situ synthesis of a pyrochlore-type La2Sn2O7 (LSO) ceramic layer on the surface of Li6.4La3Zr1.4Ta0.6O12 (LLZTO). The synthesis of LSO consumes La in LLZTO, increases the concentration of lithium ions in LLZTO, and significantly improves the conductivity of the composite electrolyte (LLZTO@LSO-CSE). Compared with the pristine sample (3.15 x 10(-5) S cm(-1)), the conductivity of LLZTO@0.9%LSO-CSE was improved by an order of magnitude (as high as 1.30 x 10(-4) S cm(-1)). At the same time, the lithium-ion transference number of LLZTO@0.9%LSO-CSE and LLZTO@1.5%LSO-CSE was 0.42 and 0.44, respectively (LLZTO@0%LSO-CSE was 0.36). Meanwhile, the pyrochlore structure of LSO has the characteristics of fast energy storage and conversion, so the full cell LiFePO4|LLZTO@LSO-CSE|Li showed superior rate capability and cycling stability. As anticipated, the discharge capacities of LiFePO4|LLZTO@0.9%LSO-CSE|Li were 141.4 mA h g(-1) (1 C) and 128.1 mA h g-1 (2 C), respectively. However, the discharge capacities of pristine batteries without LLZTO modification were 122.5 mA h g-1 (1 C) and 88.7 mA h g(-1) (2 C). After 400 cycles, the discharge capacity of the LiFePO4|LLZTO@0.9%LSO-CSE|Li remained at 110.6 mA h g-1, the Coulomb efficiency was 99.4%, and the capacity retention rate was 72% compared to 75.5 mA h g(-1), 98, and 49% for the pristine one, respectively. In addition, the transfer printing (TP) technology was used to improve the interface between the cathode and the solid-state electrolyte, which immensely increased the energy density (without aluminum foil). Compared with the original interface impedance of 379 O, the interface impedance was significantly reduced to 213 O. This uniquely developed LLZTO@LSO-CSE combined with the TP technology can provide an effective approach for the development of all-solid-state batteries.

Improved ionic conductivity and Li7P3S11 solid electrolyte based all-solid state batteries for practical applications

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

A panoramic view of Li7P3S11 solid electrolytes synthesis, structural aspects and practical challenges for all-solid-state lithium batteries

Enhancing Ionic Conductivity and Electrochemical Stability of Li3PS4 Via Zn, F Co-Doping for All-Solid-State Li-S Batteries

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

Engineering high conductive Li7P2S8I via Cl- doping for all-solid-state Li-S batteries workable at different operating temperatures

Preparation of Metal-Oxide-Doped Li7P2S8Br0.25I0.75 Solid Electrolytes for All-Solid-State Lithium Batteries

Enhanced ionic conductivity of sulfide solid electrolyte with high lithium content based on cryomilling

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

Improved Ionic Conductivity and Air Stability of Li7P3S11 by SnSe2 Doping and Two-Step Pressing Sintering Method

Ag/Br dual-doped Li6PS5Br electrolyte with superior conductivity for all-solid-state batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

Interface Improvement of Li6.4La3Zr1.6Ta0.6O12@La2Sn2O7 and Cathode Transfer Printing Technology with Splendid Electrochemical Performance for Solid-State Lithium Batteries.

Bulk and interface-strengthened Li7P2.9Sb0.1S10.65O0.15I0.2 electrolyte via dual-source doping for all-solid-state lithium-sulfur batteries

Improvement of stability and solid-state battery performances of annealed 70Li2S–30P2S5 electrolytes by additives

Enhanced Ionic Conductivity and Air Stability of Bi2se3-Doped 80Li2s-20P2s5 Solid-State Electrolytes

Improved Performance of All-Solid-State Lithium Metal Batteries via Physical and Chemical Interfacial Control

Electrochemical Performance of All-Solid-state Lithium Batteries Using Inorganic Lithium Garnets Particulate Reinforced PEO/LiClO4 Electrolyte

Hunting highly conductive Li6PS5I electrolyte via Sn-Cl dual doping for solid-state batteries