Abstract:In this study, a new traction‐separation based constitutive model for use in finite element simulation of masonry joints under complex loading conditions is developed for cohesive elements. The proposed model is formulated using damage parameters and plastic deformation with mutual couplings, and can accurately simulate the complex nonlinear behaviors of masonry joints considering hardening or softening of strength and stiffness degradation. To enhance the numerical stability of the model, plasticity and damage are separated algorithmically and implemented in two phases. In the first phase, the plastic deformations are treated using a multi‐surface plasticity model composed of a smooth hyperbolic yield surface for tension‐shear mixed‐mode failure and an elliptical cap primarily for the compressive failure. This is implemented in effective stress space and helps restrict the evolution of yield surfaces with no softening, significantly enhancing the efficiency of stress return mapping by the closed point projection method. In addition, an adaptive sub‐stepping scheme is adopted to further improve the robustness of the numerical implementation. In the second phase, nominal stresses are computed from the effective stresses using damage parameters. The evolution of these damage parameters is defined in terms of plastic work which is defined by a polynomial form, and is recommended in this study for a better calibration capability. Improvements are made in the formulation of compressive cap including incorporation of hardening of strength and stiffness degradations as these are ignored in existing interface models. This approach helped improve simulation of masonry under cyclic loads with tension‐compression transitions. For the structural level applications, the interface model is implemented within a finite element program, which is utilized to simulate failure of a number of masonry specimens under in‐plane/out‐of‐plane monotonic/cyclic loading. The simulated results are rigorously validated with existing experimental data that shows a good potential in modeling masonry structures.

Apex control within an elasto-plastic constitutive model for confined concretes

Improved Method of Giuffre-Menegotto-Pinto Hysteretic Constitutive Model

A simple and robust elastoplastic constitutive model for concrete

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

Development of an elastoplastic constitutive model in the framework of the multilaminate method for numerical analyses of geotechnical structures

A three-dimensional elastoplastic constitutive model incorporating Lode angle dependence

A micropolar isotropic plasticity formulation for non-associated flow rule and softening featuring multiple classical yield criteria Part I -- Theory

A 3D fractional elastoplastic constitutive model for concrete material

About the Use of Concrete Damage Plasticity for Modeling Masonry Post-Elastic Behavior

Numerical analysis of concrete under a wide range of stress and with different saturation condition

A one-dimensional viscoelastic and viscoplastic constitutive approach to modeling the delayed behavior of clay and organic soils

Confinement enhanced damage-plasticity model for concrete

A plastic-damage model for concrete

A micro-mechanical constitutive model for heterogeneous rocks with non-associated plastic matrix as implicit standard materials

Constitutive Model for Full-Range Elasto-Plastic Behavior of Structural Steels with Yield Plateau: Formulation and Implementation

On the use of constrained reactive mixtures of solids to model finite deformation isothermal elastoplasticity and elastoplastic damage mechanics

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

A plasticity concrete material model for DYNA3D