Abstract:Abstract Three Co-based dual-phase high-entropy alloys (HEAs) were produced by different manufacturing conditions: arc-melting with Ar protection (Ar-HEA), vacuum induction melting in Al 2 O 3 crucible (Cr-HEA) and vacuum induction melting with 0.5 at. pct Al (Al-HEA), which resulted in different levels of impurity elements and inclusion characteristics. The inclusions that precipitated in different HEA samples were investigated through an electrolytic extraction process and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) characterization. The results showed that Mn(S,Se) inclusions were presented in all three alloys. MnCr 2 O 4 inclusions were presented only in Ar-HEA, pure Al 2 O 3 inclusions were presented in Cr-HEA and Al-HEA, and Mn–Cr–Al–O inclusions were also found in Al-HEA. Thermodynamic calculation software FactSage and Thermo-calc were used to predict the inclusion formations of the HEAs, which showed a good agreement with the experimental findings. The stable inclusions can transform from MnCr 2 O 4 to Mn(Cr,Al) 2 O 4 and then to pure Al 2 O 3 with the increase of Al content. The inclusions in Al-containing HEA are spinel or Al 2 O 3 depending on the content levels of Al and O. It is proposed that the formation of spinel and Al 2 O 3 inclusions can be avoided in liquid HEA when the O content is controlled to be very low, which can result in smaller-sized inclusions. Moreover, the calculated coagulation coefficient of spinel inclusions is close but lower than that of Al 2 O 3 inclusions. The collision growth of inclusions was affected by a combination of physical parameters of HEA and inclusions as well as the inclusion size and amount. Graphical Abstract

Characterization and formation mechanism of non-metallic inclusions in single bcc-phase high entropy alloy

Effect of Manufacturing Conditions and Al Addition on Inclusion Characteristics in Co-Based Dual-Phase High Entropy Alloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy

Effect of hafnium and molybdenum addition on inclusion characteristics in Co-based dual-phase high-entropy alloys

Microstructure characterization and phase evolution of equiatomic AlCoMoFeNi high entropy alloy synthesized by mechanical alloying

Formation and evolution of metastable BCC phase during solidification of CoCrFeNi high-entropy alloy

Effect of Co on phase stability and mechanical behavior of CoxCrFeNiMnAl0.3 high entropy alloys with micro/nano hierarchical structure

Origin identification and regulation of BCC precipitation in a CoCrFeNi high entropy alloy

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

Alloying behavior and characterization of (CoCrFeNiMn)90M10 (M=Al, Hf) high-entropy materials fabricated by mechanical alloying

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

Spinodal Decomposition of B2‐phase and Formation of Cr‐Rich Nano‐precipitates in AlCoCrFeNi2.1 Eutectic High‐Entropy Alloy

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

Phase transformation and strengthening mechanisms of nanostructured high-entropy alloys