Abstract:Due to the lack of natural water resources and the rapid growth of population and economy, China is currently facing the pressing challenge of water shortage. Current evidence suggests that the traditional water resources including surface water and groundwater could not be enough to sustain increasing water demand which has been projected to hit 8.80x10(11) m(3) by 2030. Facing to such a critical situation, it is absolutely necessary to explore non-traditional water resources in order to meet future water demand. As such, municipal wastewater should be regarded as an emerging water resource rather than a waste. Presently various biological processes with activated sludge as the core have been commonly adopted for municipal wastewater treatment in China. However, these conventional activated sludge processes have been suffering from high energy consumption, large amount of excess sludge, low resource recovery efficiency, greenhouse gas emission, etc. On the other hand, the process upgrading is becoming inevitable in order for the effluent to meet increasingly strict national discharge standards. However, it should be pointed out that the current practice of process upgrading is mainly based on a simple add-on-driven philosophy, i.e., the existing biological treatment processes are expanded by including various posttreatment units for polishing soluble COD, nitrogen and phosphorus. Obviously, such an add-on-based practice inevitably leads to extremely complex process configuration, difficulty in process operation, increasing treatment costs, energy consumption and large footprint. In fact, a fundamental question to be addressed is what the primary function of municipal wastewater treatment is in the future. This article thus argues that future wastewater treatment plant should primarily serve as a nontraditional water factory that is able to supply high-quality product water, with the ultimate goal of closing wastewater-water loop. One of such examples is the integrated anaerobic membrane bioreactor and reverse osmosis process that offers a feasible engineering solution for producing high-grade water from municipal wastewater, with substantially reduced energy consumption and excess sludge production. In this integrated process, almost all soluble COD in municipal wastewater could be directly converted to biomethane gas with minimized sludge production, while the majority of soluble nutrients (e.g., ammonium and phosphate) could be effectively rejected by reverse osmosis membrane. However, in some circumstances, the ammonium concentration in reverse osmosis permeate might not meet the standards for high-grade product water when treating municipal wastewater with high ammonium concentration. As such, adsorption could be considered as a promising technology for polishing the effluent from the proposed integrated process, and different kinds of adsorbents for ammonium removal were also reviewed, ranging from conventional zeolite, biochar, ion exchange resin to advanced nanomaterials. It appears that more efforts are needed to develop novel adsorbents with high adsorption capacity and selectivity for ammonium, which are becoming possible with advances of material science and engineering. Consequently, it is demonstrated in this review that municipal wastewater as an important fresh water resource should first be fully collected and then reclaimed to high-grade product water which is a game changer in closing water loop, while helping to prolong water life cycle and alleviating the pressure of urban water shortage.

Application of Alum Sludge in Wastewater Treatment Processes: “Science” of Reuse and Reclamation Pathways

Waterworks Sludge: An Underrated Material for Beneficial Reuse in Water and Environmental Engineering

Key issues to consider when using alum sludge as substrate in constructed wetland

Aluminosilicate and zeolitic materials synthesis using alum sludge from water treatment plants: Challenges and perspectives

Re-use of Water Treatment Works Sludge to Enhance Particulate Pollutant Removal from Sewage

Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment

Exploratory Study on Reusing Water Treatment Works Sludge to Enhance Primary Sewage Treatment

A new application of sewage sludge utilization-lightweight aggregate (LWA)

Resource utilization strategies for spent pot lining: A review of the current state

A holistic valorization of treasured waste activated sludge for directional high-valued products recovery: Routes, key technologies and challenges

Structure and properties of noncrystalline nano-Al(OH)₃ reclaimed from carbonized residual wastewater treatment sludge

Utilization of alum sludge as adsorbent for phosphorus removal in municipal wastewater: A review

One Step Further to Closed Water Loop: Reclamation of Municipal Wastewater to High-Grade Product Water

Review of resource utilization of Fe-rich sludges: purification, upcycling, and application in wastewater treatment

Potential Application and Future Prospects of Algal-Bacterial Aerobic Granular Sludge for Wastewater Treatment

Efficient Phosphate Recovery and Treatment of High-Phosphorus Wastewater Using Sodium Alginate-Immobilized Microspheres Based on Aluminum-Rich Water Treatment Plant Sludge

Integrated Aerobic Granular Sludge and Membrane Process for Enabling Municipal Wastewater Treatment and Reuse Water Production

Sequential wet extraction of phosphorus from sewage sludge using alum sludge: Reassessing the aluminium-phosphorus speciation using experimental and simulation approach

Sustainable Alkali Activation: The Role of Water- and Alkali-Treated Sisal Leaf Wastewaters in Solid- Waste-Based Composite Synthesis

Hydrothermal alkaline conversion of sewage sludge: optimization of process parameters and characterization of humic acid

Use of wastewater alum-coagulation sludge as a phosphorus fertiliser – a mini review