Abstract:Due to the lack of natural water resources and the rapid growth of population and economy, China is currently facing the pressing challenge of water shortage. Current evidence suggests that the traditional water resources including surface water and groundwater could not be enough to sustain increasing water demand which has been projected to hit 8.80x10(11) m(3) by 2030. Facing to such a critical situation, it is absolutely necessary to explore non-traditional water resources in order to meet future water demand. As such, municipal wastewater should be regarded as an emerging water resource rather than a waste. Presently various biological processes with activated sludge as the core have been commonly adopted for municipal wastewater treatment in China. However, these conventional activated sludge processes have been suffering from high energy consumption, large amount of excess sludge, low resource recovery efficiency, greenhouse gas emission, etc. On the other hand, the process upgrading is becoming inevitable in order for the effluent to meet increasingly strict national discharge standards. However, it should be pointed out that the current practice of process upgrading is mainly based on a simple add-on-driven philosophy, i.e., the existing biological treatment processes are expanded by including various posttreatment units for polishing soluble COD, nitrogen and phosphorus. Obviously, such an add-on-based practice inevitably leads to extremely complex process configuration, difficulty in process operation, increasing treatment costs, energy consumption and large footprint. In fact, a fundamental question to be addressed is what the primary function of municipal wastewater treatment is in the future. This article thus argues that future wastewater treatment plant should primarily serve as a nontraditional water factory that is able to supply high-quality product water, with the ultimate goal of closing wastewater-water loop. One of such examples is the integrated anaerobic membrane bioreactor and reverse osmosis process that offers a feasible engineering solution for producing high-grade water from municipal wastewater, with substantially reduced energy consumption and excess sludge production. In this integrated process, almost all soluble COD in municipal wastewater could be directly converted to biomethane gas with minimized sludge production, while the majority of soluble nutrients (e.g., ammonium and phosphate) could be effectively rejected by reverse osmosis membrane. However, in some circumstances, the ammonium concentration in reverse osmosis permeate might not meet the standards for high-grade product water when treating municipal wastewater with high ammonium concentration. As such, adsorption could be considered as a promising technology for polishing the effluent from the proposed integrated process, and different kinds of adsorbents for ammonium removal were also reviewed, ranging from conventional zeolite, biochar, ion exchange resin to advanced nanomaterials. It appears that more efforts are needed to develop novel adsorbents with high adsorption capacity and selectivity for ammonium, which are becoming possible with advances of material science and engineering. Consequently, it is demonstrated in this review that municipal wastewater as an important fresh water resource should first be fully collected and then reclaimed to high-grade product water which is a game changer in closing water loop, while helping to prolong water life cycle and alleviating the pressure of urban water shortage.

A holistic valorization of treasured waste activated sludge for directional high-valued products recovery: Routes, key technologies and challenges

Value-Added Products Derived from Waste Activated Sludge: A Biorefinery Perspective

A Critical Review of Volatile Fatty Acids Produced from Waste Activated Sludge: Enhanced Strategies and Its Applications.

Resource recovery of high value-added products from wastewater: Current status and prospects

Advance of Sludge Producing, Hazards and Disposal Methods

Advanced approaches for resource recovery from wastewater and activated sludge: A review

Wastewater and sludge valorisation: a novel approach for treatment and resource recovery to achieve circular economy concept

Strategies of Valorization of Sludge from Wastewater Treatment

A review of carbon recovery in sewage treatment and analysis of product options for a typical water recycling plant

High Value-Added Biomaterials Recovery from Granular Sludge Based Wastewater Treatment Process

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability

The promising resource utilization methods of excess sludge: A review

Energy and nutrient recovery from municipal and industrial waste and wastewater-a perspective

Sustainable development of phosphorus recovery: From a product perspective

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Characterizing the Opportunity Space for Sustainable Hydrothermal Valorization of Wet Organic Wastes

Emerging waste valorisation techniques to moderate the hazardous impacts, and their path towards sustainability

Current advances on waste biomass transformation into value-added products

One Step Further to Closed Water Loop: Reclamation of Municipal Wastewater to High-Grade Product Water

Recovery of value-added products from biowaste: A review.

Resource recovery and circular economy from organic solid waste using aerobic and anaerobic digestion technologies