Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

High-Performance Bending Sensor Based on Femtosecond Laser-Inscribed in-Fiber Mach–Zehnder Interferometer

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Curvature sensor based on femtosecond laser-inscribed straight waveguide in FMF

An In-Fiber Mach-Zehnder Interferometer Based on Dual Side-Hole Fiber for Highly Sensitive Measurement of Curvature

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

High-performance vector torsion sensor based on high polarization-dependent in-fiber Mach-Zehnder interferometer.

Femtosecond laser inscribed straight waveguide in no-core fiber for in-line Mach–Zehnder interferometer construction

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

Bent Fiber Interferometer

Temperature Insensitive Optical Fiber Laser Bend Sensor with A Low Detection Limit

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

Optical Fiber Bending Sensor Based on Michelson Interferometer

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Fiber Mach–Zehnder Interferometers Fabricated by Nanosecond Pulses and Applications in Refractive Index Sensing

A Curvature Mach-Zehnder Interferometer Fiber Sensor Based on Triple Cladding and Coreless Fiber

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

Optical Fiber Internal-Mirror-based Fiber In-Line Mach-Zehnder Interferometer

Single S-Tapered Fiber Mach-Zehnder Interferometers