Abstract:This study describes continued investigations of the response of a swirling flow to transverse acoustic excitation. This work is motivated by transverse combustion instabilities in annular gas turbine engine architectures. This instability provides a spatially varying acoustic velocity disturbance field around the annulus, so that different nozzles encounter different acoustic disturbance fields. In this study, we simulate this effect by looking at a standing wave acoustic field where the nozzle is located at either a velocity anti-node, referred to as out-of-phase forcing, and a velocity node, referred to as in-phase forcing. The out-of-phase forcing condition provides an asymmetric forcing field about the center plane of the flow and excites an asymmetric response in the flow field; the in-phase forcing provides a symmetric forcing condition and results in symmetric flow response near the nozzzle. The symmetric versus asymmetric flow response was measured in two ways. First, in the r-x plane where axial and radial components of velocity are measured using high-speed particle image velocimetry (PIV), a helical and ring vortex rollup of the shear layers is evident in the asymmetric and symmetric forcing condition, respectively. Additionally, the swirling motion of the jet is measured in the r-θ plane at two downstream locations and a spatial decomposition is used to calculate the strength of azimuthal modes in radial velocity fluctuations. At the forcing frequency, the m = 0 mode is strongly excited at the nozzle exit with symmetric forcing, while asymmetric forcing results in a strong peak in the m = 1 mode, or the first helical mode. The results in this plane of view are congruent with those in the r-x plane. Further downstream, however, the mode strengths change as the vorticity is religned and natural asymmetries of the swirling jet set in. Finally, the low frequency self-excited motion of the vortex core was measured and characterized in the unforced flow. It is composed of an m = −1 and m = −2 mode, and the physical interpretation of these mode numbers is highlighted. High amplitude acoustic forcing decreases the amplitude of oscillation of this structure in both the in-phase and out-of-phase forcing, but to varying degrees.

Linear amplification of inertial-wave-driven swirl fluctuations in turbulent swirling pipe flows: a resolvent analysis approach

Linear analysis of a swirling jet with a realistic swirler model

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Resolvent analysis of swirling turbulent jets

Influence of Transverse Acoustic Modal Structure on the Forced Response of a Swirling Nozzle Flow

An assessment of turbulence models for linear hydrodynamic stability analysis of strongly swirling jets

Modelling the response of a turbulent jet flame to acoustic forcing in a linearized framework using an active flame approach

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

Research On Nonlinear Stability Of Swirling Jet Flow

Effect of swirl on premixed flame response at high forcing amplitudes

Resolvent analyses of incompressible turbulent channel, pipe and boundary-layer flows

Response of a Low Swirl Premixed Flame to Acoustic Perturbations

Swirl flow stability: thermodynamic analysis and experiments

Large Eddy Simulation of a Dual Swirl Gas Turbine Combustor: Flame/flow Structures and Stabilisation under Thermoacoustically Stable and Unstable Conditions

Study on the flow characteristics and oscillating mechanism of a swirl flame

The three-dimensional structure of swirl-switching in bent pipe flow

A review for measurements and simulations of swirling gas-particle flows

Performance of eddy-viscosity turbulence models for predicting swirling pipe-flow: Simulations and laser-Doppler velocimetry

Modal analysis of screeching elliptical jets

Two-fluid Turbulence Modeling of Swirling Gas-Particle Flows — A Review

Resolvent Analysis of laminar and turbulent duct flows