Abstract:In situ irradiations with 1 MeV Kr ions at 50∼613K up to a fluence of 6.25 × 1014 ions/cm2 (∼1.25 displacements per atom, dpa) have been performed on pre-aged dilute Cu-0.9%Co, Cu-0.9%Fe and Cu-0.8%Cr alloys containing uniform matrix dispersions of coherent precipitates in order to study the effects of initial precipitate sink strength, damage dose and irradiation temperature on radiation-induced coherency loss of precipitates. Coherent precipitates with different point defect sink strengths (2πNd, where N and d are the precipitate density and diameter) were used in this work to examine potential differences in atomic relaxation during absorption of point defects. In all cases, irradiation to low doses (<∼1 dpa) was very effective at inducing loss of precipitate coherency. At low sink strengths (∼1013 m−2), loss of precipitate coherency could be induced for doses ∼0.01 dpa. This suggests there might be an efficient preferential medium-range strain-induced bias for absorption of interstitial defects due to tensile strains emanating from the undersized precipitates, which induces relatively rapid loss of coherency at low precipitate sink strengths. High precipitate sink strength (∼1014 m−2) conditions were relatively resistant to the radiation-induced loss of coherency (requiring higher doses approaching ∼1 dpa) and this might be due to nearly equal numbers of interstitial and vacancy defects arriving at the precipitate interface for such high sink strength conditions. The precipitate coherency loss was observed to have a weak dependence on irradiation temperature. Molecular dynamics simulations confirm a strong effect of precipitate sink strength on the probability of interstitial absorption at precipitates.

Improvement in irradiation resistance of FeCu alloy by pre-deformation through introduction of dense point defect sinks

Deformation of Fe and Ag Precipitates in Cu Matrix

Deformation Localisation in Ion-Irradiated FeCr

Effect of sink strength on coherency loss of precipitates in dilute Cu-base alloys during in situ ion irradiation

Migration behaviour of vacancies and damage structure recovery in a Fe-based Fe-Cr-Mn-Cu-Mo multi-component alloy

Dislocation loops and hardening induced by Au ion irradiation in FeCrAl alloys with three solute concentrations

Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study

Influence of Pre-Deformation on the Precipitation of Cu-rich Clusters in RPV Model Steel

Atomic-Scale Three-Dimensional Irradiation-Induced Defect Kinetics Models for Bcc Fe-Based Alloys

Irradiation Behaviors in BCC Multi-Component Alloys with Different Lattice Distortions

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

The effect of dislocations on irradiation-induced vacancy-like defects in FeCu alloy and reactor pressure vessel steel

The Effect of Dislocations on MnNi-rich Clusters in Self-Ion Irradiated FeMnNi Alloy

Effect of prefatigue deformation on the uniaxial tensile properties of a dilute Cu-Al alloy

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

Microstructure, strength and irradiation response of an ultra-fine grained FeNiCoCr multi-principal element alloy

Microstructure investigations of Fe50Mn30Co10Cr10 dual–phase high–entropy alloy under Fe ions irradiation

Cold deformation behavior and microstructure evolution of biomedical Cu-containing L605 alloy

In Situ Study of Heavy Ion Irradiation Response of Immiscible Cu/Fe Multilayers

Study on Displacement Cascade and Tensile Simulation by Molecular Dynamics: Formation and Properties of Point Defects

Microstructure and radiation stability of nano-dispersoids in particle-reinforced FeCrAl alloys with different Zr concentrations