Abstract:<section class="article-section__content"><p>The poor compatibility and flame retardation of polylactide (PLA) and poly(butylene adipate<i>‐co‐ </i>terephthalate) (PBAT) blends seriously limit their applications. This study focused on the mechanical properties and flame retardancy of a PLA/PBAT blend under the influence of different levels of compatibilizer and multifunctional additives (MFA). PLA and PBAT were successfully compatibilized via reactive blending in a twin‐screw extruder. The flame retardation, flexibility, and impact toughness of the compatibilized blend were improved by the presence of tricresyl phosphate (TCP) and triethyl citrate (TEC). Separately and in combination, the two additives played crucial roles in flame retardant effectiveness, plasticization, and impact modification. The compatibilized blend displayed a UL‐94 V‐0 rating and exhibited a high limiting oxygen index (LOI). A slight reduction in thermal stability was exhibited when 20 phr TCP was incorporated into the blend. During combustion, an integrated char layer formed on the compatibilized blend surface and retarded flammability. The combination of TCP and TEC not only significantly improved dripping behavior and flame‐retardant properties of the compatibilized blend but also cooperatively enhanced the elongation at break and impact strength without impacting tensile strength, Young's modulus, LOI value, and thermal stability. The failure behavior of the blend changed from brittle to ductile, as evidenced by SEM, which revealed elongated fibrils after tension. These characteristics were associated with the presence of the MFAs and the improved interfacial adhesion between PLA and PBAT. As a result, flame retardation, flexibility, and impact resistance were enhanced. These improvements permit the wider application of PLA, especially in the electronic and automotive fields. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>Compatibilized PLA/PBAT blend achieved the V‐0 rating and had a high LOI.</li><li>Both TCP and TEC could be used as multifunctional additives (MFAs) in the compatibilized blend.</li><li>Combination of MFAs synergistically enhanced elongation at break and impact strength without impacting other properties of the blends.</li><li>These improvements permit the wider application of PLA, especially in the electronic and automotive fields.</li></ul></section>

Highly impact toughened and excellent flame-retardant polylactide/poly(butylene adipate-co-terephthalate) blend foams with phosphorus-containing and food waste-derived flame retardants

Ultra-light polylactic acid/combination composite foam: A fully biodegradable flame retardant material

A molecularly engineered bioderived polyphosphate for enhanced flame retardant, UV-blocking and mechanical properties of poly(lactic acid)

Enhancing Flame Retardancy of Polylactic Acid with a Novel Fully Bio‐based Flame Retardant synthesized from Phytic Acid and Cytosine

Bio-Based Trivalent Phytate: A Novel Strategy for Enhancing Fire Performance of Rigid Polyurethane Foam Composites

Influence of compatibilizer and multifunctional additive loadings on flame retardation, plasticization, and impact modification of polylactide and poly(butylene adipate‐co‐terephthalate) biodegradable blends

Fully bio-based intumescent flame retardant hybrid: A green strategy towards reducing fire hazard and improving degradation of polylactic acid

Flame retarded plasticized poly(lactic acid) using phosphorus-based additives

Facile synthesis of novel soy protein-based flame retardant and its effects on the flame retardancy and biodegradation of polylactic acid

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

A nimble strategy for enabling bioderived flame retardants with strikingly enhanced interfacial compatibility in poly (lactic acid) composites

Preparation of super toughened flame-retardant polylactic acid with an in situ hyperbranched structure by reactive blending with a phosphorus-containing copolyester and hexamethylene glycidyl cyclotriphosphazene

Recent Development of Phosphorus Flame Retardants in Thermoplastic Blends and Nanocomposites

Facile synthesis of soybean protein-based phosphorus-nitrogen flame retardant for poly(lactic acid)

One-pot solvent-free green strategy to fabricate ultra-efficient polyphosphoester flame retardant for Poly(Lactic acid)

Combustion and Thermal Properties of Polylactide with an Effective Phosphate-Containing Flame-Retardant Oligomer

Combined influences of trioctyl phosphate and modified microcrystalline cellulose from oil palm empty fruit bunch waste on characteristics of polylactide composite

Improving the toughness and flame retardancy of poly (lactic acid) with phosphorus‐containing core‐shell particles

Pentaerythritol derived bicyclic phosphates as halogen-free flame retardants for thermoplastic polyurethane

Preparation of phytic acid‐based green intumescent flame retardant and its application in PLA nonwovens

Phytic Acid-Based Flame Retardant and Its Application to Poly(lactic Acid) Composites