Abstract:<section class="article-section__content"><p>The poor compatibility and flame retardation of polylactide (PLA) and poly(butylene adipate<i>‐co‐ </i>terephthalate) (PBAT) blends seriously limit their applications. This study focused on the mechanical properties and flame retardancy of a PLA/PBAT blend under the influence of different levels of compatibilizer and multifunctional additives (MFA). PLA and PBAT were successfully compatibilized via reactive blending in a twin‐screw extruder. The flame retardation, flexibility, and impact toughness of the compatibilized blend were improved by the presence of tricresyl phosphate (TCP) and triethyl citrate (TEC). Separately and in combination, the two additives played crucial roles in flame retardant effectiveness, plasticization, and impact modification. The compatibilized blend displayed a UL‐94 V‐0 rating and exhibited a high limiting oxygen index (LOI). A slight reduction in thermal stability was exhibited when 20 phr TCP was incorporated into the blend. During combustion, an integrated char layer formed on the compatibilized blend surface and retarded flammability. The combination of TCP and TEC not only significantly improved dripping behavior and flame‐retardant properties of the compatibilized blend but also cooperatively enhanced the elongation at break and impact strength without impacting tensile strength, Young's modulus, LOI value, and thermal stability. The failure behavior of the blend changed from brittle to ductile, as evidenced by SEM, which revealed elongated fibrils after tension. These characteristics were associated with the presence of the MFAs and the improved interfacial adhesion between PLA and PBAT. As a result, flame retardation, flexibility, and impact resistance were enhanced. These improvements permit the wider application of PLA, especially in the electronic and automotive fields. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>Compatibilized PLA/PBAT blend achieved the V‐0 rating and had a high LOI.</li><li>Both TCP and TEC could be used as multifunctional additives (MFAs) in the compatibilized blend.</li><li>Combination of MFAs synergistically enhanced elongation at break and impact strength without impacting other properties of the blends.</li><li>These improvements permit the wider application of PLA, especially in the electronic and automotive fields.</li></ul></section>

Combined influences of trioctyl phosphate and modified microcrystalline cellulose from oil palm empty fruit bunch waste on characteristics of polylactide composite

Synergistic effect of microcrystalline cellulose from oil palm empty fruit bunch waste and tricresyl phosphate on the properties of polylactide composites

Influence of compatibilizer and multifunctional additive loadings on flame retardation, plasticization, and impact modification of polylactide and poly(butylene adipate‐co‐terephthalate) biodegradable blends

Preparation and Mechanism of Toughened and Flame-Retardant Bio-Based Polylactic Acid Composites

Flame retarded plasticized poly(lactic acid) using phosphorus-based additives

A nimble strategy for enabling bioderived flame retardants with strikingly enhanced interfacial compatibility in poly (lactic acid) composites

Intumescent-Grafted Bamboo Charcoal: A Natural Nontoxic Fire-Retardant Filler for Polylactic Acid (PLA) Composites

Synchronously Enhanced Flame Retardancy and Mechanical Properties of Polylactic Acid Via In-Situ Assembly of Polyphosphazene Nanoparticles on Ammonium Polyphosphate

Phytic Acid-Based Flame Retardant and Its Application to Poly(lactic Acid) Composites

Combination of Corn Pith Fiber and Biobased Flame Retardant: A Novel Method toward Flame Retardancy, Thermal Stability, and Mechanical Properties of Polylactide

A green way to simultaneously enhance the mechanical, flame retardant and anti-ultraviolet aging properties of polylactide composites by the incorporation of tannic acid derivatives

Performance analysis and structure characterization of polylactic acid modified with three flame retardants

Flame-retardant and UV-shielding poly (lactic acid) composites with preserved mechanical properties by incorporating cyclophosphazene derivative and phosphorus-modified lignin

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Synthesis of phenylphosphorylated microcrystal cellulose biobased flame retardants and its flame-retardant modification on PLA biomaterials

Mechanically robust and flame-retardant poly(lactide)/poly(butylene adipate-co-terephthalate) composites based on carbon nanotubes and ammonium polyphosphate

Scalable Manufacturing Green Core–Shell Structure Flame Retardant, with Enhanced Mechanical and Flame-Retardant Performances of Polylactic Acid

Making a Supertough Flame-Retardant Polylactide Composite Through Reactive Blending with Ethylene-Acrylic Ester-Glycidyl Methacrylate Terpolymer and Addition of Aluminum Hypophosphite

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Highly impact toughened and excellent flame-retardant polylactide/poly(butylene adipate-co-terephthalate) blend foams with phosphorus-containing and food waste-derived flame retardants