Abstract:The visualized cavitation experimental apparatus is designed and constructed. The cavitation evolution process is recorded by high‐speed photography. The evaporation and condensation coefficients are modified based on experiments. The cavitation damage region is predicted by the gas‐phase condensation rate.For the phenomenon of widespread and serious cavitation damage in the throttling section of pressure reducing valve under high temperature and high pressure in the chemical technology process of petroleum and coal, according to actual coordination structure widely applied between the valve core and valve seat, the cavitation throttling section with symmetrical contraction and expansion was made, and the visualized cavitation water tunnel experimental apparatus was designed and constructed. The cavitation evolution process with time under different cavitation numbers σ was recorded by the high‐speed photography, the variation law of cavitation damage length and area with time was investigated by using aluminum film as cavitation damage carrier. Based on the experimental cavitation characteristic length L*, the evaporation coefficient Fv, and condensation coefficient Fc in the Zwart–Gerber–Belamri cavitation numerical model were modified, and the cavitation damage region was predicted by the gas phase condensation rate of numerical simulation. The results show that with the decrease of cavitation number, the characteristic length of cavitation strip increases; the cavitation characteristic length fluctuates greatly at σ = 1.22, and there are cavitation cloud periodic formation, shedding, collapse, and disappearance at the tail of the cavitation strip on the upper valve seat; the cavitation damage length of the upper and lower valve seat remains unchanged with time, and the cavitation damage area increases approximately linearly with time; the initial position and length of cavitation damage predicted by the gas phase condensation rate are basically consistent with the experimental results, which verifies the accuracy of the modified numerical simulation.

Investigation on dynamic stress of the discharge valve in the transcritical CO2 compressor

Valve Dynamic Characteristic and Stress Analysis of Reciprocating Compressor Under Stepless Capacity Regulation

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Valve Dynamic and Thermal Cycle Model in Stepless Capacity Regulation for Reciprocating Compressor

Valve Plate Roll Analysis on Stepless Capacity Regulation for Reciprocating Compressor

Dynamic characteristics of pilot-operated electro-hydraulic flow distribution system

Rupture Failure Analysis of the Executing Fork of the Flow Regulating Apparatus in a Partial Stroke Press-Off Inlet Valve

Dynamic Performance of Reciprocating Compressor with Capacity Regulation System

Finite element analysis and topology optimization of direct-drive compressor valve

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Turbulent Compressible Flow Analysis on Multi-Stage High Pressure Reducing Valve

Experimental Study of Working Stability in Transcritical CO2 Compression-Ejection System

Investigation on unsteady characteristics of flow separation in a supercritical carbon dioxide centrifugal compressor

Experiment and numerical simulation investigation on cavitation evolution and damage in the throttling section of pressure reducing valve

Theoretical and Experimental Research on Thermal Dynamic Characteristics of Single-Screw Compressor with a New Composite SLIDE valve

Numerical study on sealing performance of supercritical carbon dioxide compressor dry gas seal

Modeling the valve dynamics in a reciprocating compressor based on two-dimensional computational fluid dynamic numerical simulation