Abstract:This article presents a numerical short-open-load (SOL) calibration technique for accurate extraction of electrically small planar/nonplanar microstrip-line (MSL) circuits and elements in the interface of 3-D full-wave algorithm or simulator. An additional matched-load condition is established at the reference plane and employed in the whole calibration process. In comparison with the traditional short-open calibration (SOC) method, the proposed SOL technique implemented in the interface of software does not inquire prior simulation of the internal current/voltage at the reference plane of two calibration standards but only needs to know the external port impedances of three calibration standards. After the description of entire extraction process, a few typical electrically small planar circuits, such as MSL open-end and step discontinuities, are first numerically deembedded, and their extracted circuit parameters are evidently confirmed with other published ones. Then, a nonplanar structure of a vertically placed shorting pin in the middle of MSL is studied with different sizes and positions to effectively extract the circuit parameters in the two presented equivalent models. Finally, a third-order Chebyshev filter is designed with pin-loaded MSL structures. Its frequency response is synthesized on the proposed SOL method to validate the correctness of the extracted circuit parameters and further demonstrate the usefulness of this method in synthesis design of electrically large microwave circuits. Good agreement among the filtering frequency responses from equivalent circuit model, full-wave simulation, and measurement has well revealed that the proposed SOL method is indeed accurate in numerical extraction of circuit elements and efficient in synthesis design of an entire circuit with prescribed specifications.

Improved RSOL planar calibration via EM modelling and reduced spread resistive layers

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Comparison of On-Wafer TRL Calibration to ISS SOLT Calibration With Open-Short De-Embedding up to 500 GHz

Numerical Short-Open-Load (SOL) Calibration Technique for Accurate Extraction of Electrically-Small Planar/Non-Planar Microstrip-Line Circuits

A New Calibration Technique of Electromagnetic Simulators for Accurate Analyses of Microwave Components on Epitaxial Wafers

Sensitivity Analysis of Calibration Standards for SOLT and LRRM

An Improved Line-Reflect-Reflect-Match Calibration With an Enhanced Load Model

A new method for high resolution curvature measurement applied to stress monitoring in thin films

Bilateral form characterization of curved transparent components using chromatic confocal sensor

CD-SEM real time bias correction using reference metrology based modeling

A New SOLT Calibration Method for Leaky On-Wafer Measurements Using a 10-Term Error Model

Process development and validation of nextgeneration 3D calibration standards forapplication in optical microscopy

A Method to Determine LRRM Calibration Standards in Measurement Configurations Affected by Leakage

An open-source, accurate, and iterative calibration method for liquid-crystal-based spatial light modulators

Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz

Measurements of Planar Microwave Circuits Using an Improved Trl Calibration Method

Measuring Linewidth For Micro-Components Based On Regular-Reflective Triangulation Measuring Method