Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Improving the Ionic Conductivity and Anode Interface Compatibility of LLZO/PVDF Composite Polymer Electrolytes by Compositional Tuning

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Enhanced ionic conductivity and interface compatibility of PVDF-LLZTO composite solid electrolytes by interfacial maleic acid modification

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Peo-Licio4-Zsm5 Composite Polymer Electrolyte - I. Electrochemical Study

Modification of Solid Electrolyte Interface Layer Between PVDF-based Electrolyte and Lithium Anode

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Surface modification strategies for an improved interfacial compatibility between LLZO and a polymer substrate for applications in high-performance solid-state Li-metal batteries

Improved ionic conductivity and Li dendrite suppression of PVDF-based solid electrolyte membrane by LLZO incorporation and mechanical reinforcement

Uniform Lithium Plating for Dendrite-Free Lithium Metal Batteries: Role of Dipolar Channels in Poly(vinylidene fluoride) and PbZr x Ti 1- x O 3 Interface

Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders

Surface modification of garnet fillers with polymeric sacrificial agent enables compatible interfaces of composite solid-state electrolytes

Enhanced Electrochemical Proterties and Optimiazed Li+ Transmission Pathways of PEO/LLZTO‐Based Composite Electrolytes Modified by Supramolecular Combination

Building Cross-Phase Ion Transport Channels Between Ceramic and Polymer for Highly Conductive Composite Solid-State Electrolyte

Performance and behavior of LLZO-based composite polymer electrolyte for lithium metal electrode with high capacity utilization

Achieving High Performance of Lithium Metal Batteries by Improving the Interfacial Compatibility between Organic and Inorganic Electrolytes Using a Lithium Single-Ion Polymer

Li0.35La0.55TiO3 Nanofibers Enhanced Poly(vinylidene Fluoride)-Based Composite Polymer Electrolytes for All-Solid-State Batteries.

First‐Principles Study on Polymer Electrolyte Interface Engineering for Lithium Metal Anodes