Abstract:The corrosion resistance and stress corrosion cracking (SCC) susceptibility of Type 347H stainless steel (SS) in supercritical water (SCW) were investigated. The general corrosion behavior was investigated by exposure test and the specimens after testing were characterized utilizing scanning electron microscopy (SEM), Auger and x-ray diffraction analysis, optical microscopy, and energy dispersive spectroscopy (EDS). The results show that with the increase of testing temperature, the corrosion rate of the materials is greatly enhanced. The corrosion process is analyzed and the formation of oxide islands on the surface of the corroded sample is attributed to the higher diffusion rate of Cr along the grain boundary. The effects of temperature and dissolved oxygen on SCC susceptibility were investigated by slow strain rate tensile test. The fractographs were characterized by SEM and the cross-section morphologies were characterized with back-scattered electron imaging, SEM, and EDS. The results indicate that, as temperature is increased, the tensile strength and strain of materials is greatly reduced, while the oxygen content in SCW has a limited effect on the mechanical properties. Intergranular cracking and ductile fracture are the main fracture modes for Type 347H SS tested in SCW, independent of temperature and oxygen content. The implications of the results to the mechanisms of SCC are discussed.

Determining SCC resistance of stainless steel claddings in high- temperature water by constant load crack growth tests and slow strain rate tests

Correlating oxidation resistance to stress corrosion cracking of 309L and 308L stainless steel claddings in simulated PWR primary water

Effects of composition and microstructure on oxidation and stress corrosion cracking susceptibility of stainless steel claddings in hydrogenated PWR primary water

Investigations on the SCC initiation behavior of cold worked 316 L in high temperature oxygenated water at constant loads

Investigations on the SCC initiation behavior of cold worked 316L in high temperature oxygenated water at constant loads

Microstructure and Stress Corrosion Cracking of a SA508-309L/308L-316L Dissimilar Metal Weld Joint in Primary Pressurized Water Reactor Environment

A Study on the Corrosion and Stress Corrosion Cracking Susceptibility of 310-ODS Steel in Supercritical Water

Effects of Chloride and Oxygen on Stress Corrosion Cracking of Cold Worked 316/316L Austenitic Stainless Steel in High Temperature Water

Environment assisted cracking of 308L weld metal in high temperature water

Stress Corrosion Crack Growth Behavior of Type 310S Stainless Steel in Supercritical Water

Environmentally Assisted Cracking of Forged 316LN Stainless Steel and Its Weld in High Temperature Water

Corrosion and Stress Corrosion Cracking Susceptibility of Type 347H Stainless Steel in Supercritical Water

Study on Corrosion Fatigue Behavior of 304L Austenite Stainless Steel in 325 °C High-Temperature Water Environment

Microstructure and Intergranular Stress Corrosion Cracking Susceptibility of a SA508-52M-316L Dissimilar Metal Weld Joint in Primary Water

Evaluation Of Stress Corrosion Cracking Of Type 304l Stainless Steel In Low Concentration Sodium Hydroxide Solution With High Temperature

A Research on the Corrosion and Stress Corrosion Cracking Susceptibility of 316L Stainless Steel Exposed to Supercritical Water

Unveiling the synergistic effect of thermal aging and irradiation corrosion on the passivation performance and stress corrosion cracking of 308 L stainless steel under high-temperature water environment

Stress Corrosion of Austenitic Stainless Steel 316L in High Temperature Water

Evaluation of Stress Corrosion Cracking Susceptibility of Forged 316 Stainless Steel in Simulated Primary Water

Stress Corrosion Cracking Behavior of Cold-Drawn 316 Austenitic Stainless Steels in Simulated Pwr Environment

On the Stress Corrosion Crack Initiation Behaviour of Alloy 800 in High-Temperature Hydrogenated Water