Abstract:Ni/SBA-15 meso-structured catalysts modified with chromium and CeO2 (Ni-Cr-CeO2/SBA-15) were utilized to produce hydrogen from glycerol steam reforming (GSR). The catalysts were synthesized by a one-pot hydrothermal process and extensively characterized by analytical techniques such as N2 adsorption-desorption (BET), H2-temperature programmed reduction (H2-TPR), powder X-ray diffraction (PXRD), inductively coupled plasma-optical emission spectrometry (ICP-OES), and transmission electron microscopy (TEM). The low-angle XRD reflections affirmed that the catalysts were crystalline and possessed a 2D-ordered porosity. The BET results depicted that all the catalysts exhibited a good surface area ranging from 633 to 792m2/g, and the pore sizes were consistently in the mesoporous range (between 3 and 5 nm). TEM analysis of both calcined and spent catalysts revealed that the metal active sites were embedded in the hybrid CeO2-SiO2 support. Overall, the Ni-based catalysts exhibited higher glycerol conversion -12Ni-SBA-15-99.9%, 12Ni3CeO2-SBA-15-89.4%, and 8Ni4Cr3CeO2-SBA-15-99.7%. Monometallic 12Ni/SBA-15 performed exceptionally well, while 12Cr/SBA-15 performed poorly with the highest 71.48% CO selectivity. For short-term GSR reactions, CeO2 addition to 12Ni/SBA-15 did not have any effect, whereas Cr addition resulted in a 32% decrease in H2 selectivity. The long-term stability studies of 12Ni-SBA-15 showed H2 selectivity of ~ 64% and ~ 98% glycerol conversion. However, its activity was short-lived. After 20-30 h, the H2 selectivity and conversion dropped precipitously to 40%. The doping of mesoporous Ni/SBA-15 with Cr and CeO2 remarkably enhanced the long-term stability of the catalyst for 12Ni3CeO2-SBA-15, and 8Ni4Cr3CeO2-SBA-15 catalyst which showed ~ 58% H2 selectivity and ~ 100% conversion for the entire 60 h. Interestingly, Cr and CeO2 seem to improve the shelf-life of Ni-SBA-15 via different mechanistic pathways. CeO2 mitigated Ni poisoning through coke oxidation whereas Cr bolstered the catalyst stability via maintaining a well-defined pore size, structural rigidity, and integrity of the heterogeneous framework, thereby restricting structural collapse, and hence retard sintering of the Ni active sites during the long-term 60 h of continuous reaction. Hydrogen generation from renewable biomass like glycerol could potentially serve as a sustainable energy source and could substantially help reduce the carbon footprint of the environment.

Hydrogen generation from methanol steam reforming process of CuCrO2-CeO2 nanopowders catalyst

Hydrogen Generation from Methanol Steam Reforming Process of Cucro2-Ceo2 Nanopowders Catalyst

CuFeO2–CeO2 nanopowder catalyst prepared by self-combustion glycine nitrate process and applied for hydrogen production from methanol steam reforming

Hydrogen generation by methanol steam reforming process by delafossite-type CuYO2 nanopowder catalyst

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Modification of Electrospun CeO2 Nanofibers with CuCrO2 Particles Applied to Hydrogen Harvest from Steam Reforming of Methanol

ZnCr X Fe 2-X O 4 (X = 0–2) porous powder prepared through self-combustion glycine nitrate process and applied to methyl alcohol steam reforming for production of pure hydrogen

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Improved hydrogen production performance from methanol steam reforming by Ce‐doped CuO–Y2O3 catalysts

Hydrogen Production from Methanol Steam Reforming over Fe-Modified Cu/CeO2 Catalysts

Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

ZnO–ZnCr2O4 composite prepared by a glycine nitrate process method and applied for hydrogen production by steam reforming of methanol

Production of Hydrogen by Steam Reforming of Methanol on CeO2 Promoted Cu/Al2O3 Catalysts

Cr and CeO2 promoted Ni/SBA-15 framework for hydrogen production by steam reforming of glycerol

Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts

A Highly Efficient Cu/Zno/Al2o3 Catalyst Via Gel-Coprecipitation of Oxalate Precursors for Low-Temperature Steam Reforming of Methanol

Oxidative Steam Reforming of Methanol over Cu-Based Catalysts

NiSe2/CeO2 catalysts from Ce-UiO-66 metal-organic skeleton and their electrocatalytic oxidation of methanol, urea and glycerol

Steam Reforming of Methane over Nickel-Aluminum Spinel-Derived Catalyst

Cu–Mn–O nano-particle/nano-sheet spinel-type materials as catalysts in methanol steam reforming (MSR) and preferential oxidation (PROX) reaction for purified hydrogen production