Abstract:Advances in solid electrolytes (SEs) with superionic conductivity and stabilized electrode-electrolyte interfaces are key enablers for all-solid-state batteries (SSBs) to meet the energy density and cost targets for next-generation batteries for electric vehicles. Argyrodite sulfide-based electrolytes with the nominal composition Li 6 PS 5 X; where X= Cl and/or Br, I provide several key advantages over other types of SE counterparts, including (i) exceptionally high ionic conductivities up to 10 -2 S/cm at room temperature (comparable to nonaqueous liquid electrolytes), (ii) availability of low temperature and inexpensive synthesis routes to produce glass, glass-ceramic, and crystalline structures, and (iii) soft mechanical properties facilitating material processing and solid-state battery (SSB) fabrication. Several key challenges exist for the practical use of the argyrodite sulfide-based electrolyte in an SSB: (i) scale-up synthesis to produce phase-pure materials, (ii) rationale processing method development to produce free-standing thin film SSEs, and (iii) identifying buried interfacial side-reaction products at the electrode/electrolyte interfaces using advanced characterization tools. In this talk, we will present our recent achievements focusing on tackling each of these challenges, including (i) solution-based synthesis of Li 6 PS 5 X; (ii) optimizing binder, slurry composition, and processing method to make Li 6 PS 5 X thin film (<50 μm) SSEs, and (iii) combining in-situ Raman spectroscopy and microscopy with complementary electrochemical impedance spectroscopy (EIS) to explore electrode/ Li 6 PS 5 X interfacial stability. Acknowledgment This research conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) is sponsored by the Office of Energy Efficiency and Renewable Energy (EERE) in the Vehicle Technologies Office (VTO) through the Advanced Battery Materials Research (BMR) Program.

Evidencing Phase Transformations of Li 6 PS 5 Cl Argyrodite under Ambient Air and Dry Room Exposure

Evidencing Phase Transformations of Li6PS5Cl Argyrodite under Ambient Air and Dry Room Exposure

Critical Current Density Measurements of Argyrodite Li6PS5Cl Solid Electrolyte at Ambient Pressure

Re-sintering induced ionic conductivity recovery for air-exposed Li5.4PS4.4Cl1.6 argyrodite sulfide electrolyte

Molecular-Level Insight into the Interfacial Reactivity and Ionic Conductivity of a Li-Argyrodite Li6PS5Cl Solid Electrolyte at Bare and Coated Li-Metal Anodes

Enabling Argyrodite Sulfides as Superb Solid‐State Electrolyte with Remarkable Interfacial Stability Against Electrodes

The Role of Phosphorous in the Solid Electrolyte Interphase of Argyrodite Solid Electrolytes

Sn-Substituted Argyrodite Li6PS5Cl Solid Electrolyte for Improving Interfacial and Atmospheric Stability

From symmetry breaking in the bulk to phase transitions at the surface: a quantum-mechanical exploration of Li6PS5Cl argyrodite superionic conductor

Influence of Atmospheric Gas Species on an Argyrodite‐Type Sulfide Solid Electrolyte During Moisture Exposure

Tailoring Solution-Processable Li Argyrodites Li6+ xP1- xMxS5I (M = Ge, Sn) and Their Microstructural Evolution Revealed by Cryo-TEM for All-Solid-State Batteries

Unraveling the Intra and Intercycle Interfacial Evolution of Li6PS5Cl‐Based All‐Solid‐State Lithium Batteries

Investigating Dry Room Compatibility of Chloride Solid-State Electrolytes for Scalable Manufacturing

Formation process of halogen-rich argyrodite: elemental disordering of atomic arrangement at the 4a and 4d sites in a heat treatment

An Effective Strategy to Enable Argyrodite Sulfides as Superb Solid-State Electrolytes: Safeguarding Remarkable Ionic Conductivity and Interfacial Stability with Electrodes

Synthetic optimization and application of Li-argyrodite Li6PS5I in solid-state battery at different temperatures

Enhanced Air Stability and Interfacial Compatibility of Li-Argyrodite Sulfide Electrolyte Triggered by CuBr Co-Substitution for All-Solid-State Lithium Batteries

Development of Argyrodite-Based Sulfide Electrolytes for Next-Generation Solid-State Li Batteries

Chemical and Electrochemical Characterization of Hot‐Pressed Li6PS5Cl Solid State Electrolyte: Operating Pressure‐Invariant High Ionic Conductivity

Unraveling the crystallinity on battery performances of chlorine-rich argyrodite electrolytes

Operando Photoelectron Spectroscopy Analysis of Li6PS5Cl Electrochemical Decomposition Reactions in Solid-State Batteries