Abstract:Drilling precise micro-holes in glass material has brought a new challenge, primarily due to its application in microfluidic devices. It is required to reduce machining time and simultaneously achieve repeatability of the process. The machined hole should have minimum overcut to get desired hole diameter. Maximum hole circularity and minimum heat-affected zone are the essential hole characteristics to achieve controlled machining. The multi-criteria decision-making (MCDM) method is quite effective in selection of best possible combination of outputs from several alternative solutions. The experimental data from the previously published paper is used in the current study. As input parameters, the experiment data include voltage, tool feed rate, and machining time. The radial overcut (ROC), circularity of the machined hole and heat-affected zone (HAZ) were calculated as output responses. The experiments were conducted using copper and nickel-coated copper tools in previous study and response data were used in current work. The present study uses the methods which include hybrid grey relational analysis (GRA), technique for order performance by similarity to ideal solution (TOPSIS), and VIšekriterijumsko KOmpromisno Rangiranje (VIKOR) methods for the selection of the best combination of process parameters in drilling to obtain the optimal geometric characteristic of a hole, i.e. optimal values of ROC, circularity and HAZ, in glass using electrochemical discharge machining (ECDM). In this study, weight calculation for MCDM was proposed using entropy and analytic hierarchy process (AHP) methods and combined to get final weights using the fuzzy logic tool, which determines the importance of AHP and entropy weights using the expert opinion. The final weights were used to calculate the ranks from each MCDM method and determine optimal process parameter selection in ECDM hole drilling with copper and nickel-coated copper tools. The fuzzy logic method determined that the weight contribution from AHP is 0.586 in the present study. Genetic algorithm-based multi-objective optimization was conducted, and a non-dominated Pareto front was generated. The Spearman correlation method was used to determine the relationship between different MCDM methods. The current study will be helpful in selecting the best combination of process parameters in drilling holes during ECDM machining using MCDM methods.

Application of Multi-Criteria Decision Model to Develop an Optimized Geometric Characteristic in Electrochemical Discharge Machining

A study on multi-criteria decision-making in powder mixed electric discharge machining cylindrical shaped parts

Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach

Evaluation of entropy-coupled multi-criteria decision-making methods for enhancing machinability

Application of topsis, mairca and EAMR methods for multi-criteria decision making in cubic boron nitride grinding

Multi-objective Optimization of Electric Discharge Machining of Al-SiCp Composite by Taguchi-PCA, Firefly and Cuckoo Search Algorithm

Multi response optimization of EDM process parameters for biodegradable AZ31 magnesium alloy using TOPSIS and grey relational analysis

The m-polar fuzzy ELECTRE-I integrated AHP approach for selection of non-traditional machining processes

Multi-response optimization in face milling of EN-31 steel using analytical hierarchy process-based GRA

Development of entropy embedded COPRAS-ARAS hybrid MCDM model for optimizing EDM parameters while machining high carbon chromium steel plate

Performance Analysis and Optimization of Different Electrode Materials and Dielectric Fluids on Machining of High Carbon High Chromium Steel in Electrical Discharge Machining

An Experimental Analysis of Taguchi-Based Gray Relational Analysis, Weighted Gray Relational Analysis, and Data Envelopment Analysis Ranking Method Multi-Criteria Decision-Making Approaches to Multiple-Quality Characteristic Optimization in the CNC Drilling Process

Parametric analysis of dry machining process using a novel integrated multi-attribute decision making approach

Multi-objective optimization of an EDM process for Monel K-500 alloy using response surface methodology-multi-objective dragonfly algorithm

Machining Of Inconel-825 Superalloy With Magnetic Field Assisted Electrical Discharge Turning: A Optimization Approach Using Response Surface Methodology And Multi-Objective Genetic Algorithm

Multi Response Optimization of ECDM Process for Generating Micro Holes in CFRP Composite Using TOPSIS Methodology

Nature Inspired Metaheuristic Approach for Best Tool Work Combination for EDM Process

Comparison of EDM and laser trepanation micro-drilling processes using multiple-criteria decision analysis

Comparative Analysis of Grey Relational Analysis Integrated with the Principal Component Analysis and Analytic Hierarchy Process for Multiobjective Optimization of Inclined Laser Percussion Drilling in Carbon Fiber Reinforced Composites

Parametric Optimization for Quality of Electric Discharge Machined Profile by Using Multi-Shape Electrode

Multi-Objective Optimization of the Process Parameters in Electric Discharge Machining of 316L Porous Stainless Steel Using Metaheuristic Techniques