Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Favorable combination of foldability and toughness of transparent cellulose nanofibril films by a PET fiber-reinforced strategy

Eco-friendly Cellulose Nanofibrils with High Surface Charge and Aspect Ratio for Nanopaper Films with Ultrahigh Toughness and Folding Endurance

Constructing a "Micro-Nano Collaboration" Network Via Disk-Milling: Value-enhanced Utilization of Flexible Temperature-Resistant Cellulose Insulation Films.

High aspect ratio cellulose nanofibrils with low crystallinity for strong and tough films

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Super foldable transparent paper by regulating the multi-scale structure of cellulose fibers

Wood-inspired strategy to toughen transparent cellulose nanofibril films

Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Sustainable Multiscale High-Haze Transparent Cellulose Fiber Film via a Biomimetic Approach

The fabrication of flexible and oxygen barrier cellulose nanofiber/polylactic acid nanocomposites using cosolvent system

Robust cellulose nanofibrils reinforced poly(methyl methacrylate)/polystyrene binary blend composites with pebble‐shaped structure using Pickering emulsion gel

Durability of cellulose nanofibril films examined via residual drying stress measurement

A new 3D printing strategy by enhancing shear-induced alignment of gelled nanomaterial inks resulting in stronger and ductile cellulose films

Tough And Moldable Sustainable Cellulose‐Based Structural Materials via Multiscale Interface Engineering

Biodegradable Poly(butylene adipate- co -terephthalate) Nanocomposites Reinforced with In Situ Fibrillated Nanocelluloses

Transparent Cellulose/Multi-Walled Carbon Nanotube Hybrids with Improved Ultraviolet-Shielding Properties Prepared from Cotton Textile Waste

Flexible and Recyclable Bio-Based Polyester Composite Films with Outstanding Mechanical and Gas Barrier Properties Using Leaf-Shaped CNT@BNNS Covalent Heterojunction

High‐efficiency modification of PET by the low addition of a self‐assembled functional nanocellulose film prepared from waste paper

In situ self-assembly of pulp microfibers and nanofibers into a transparent, high-performance and degradable film

Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State

Enhancement of cellulose nanofibril (CNF) film barrier properties by nanofibril alignment