Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Sustainable Multiscale High-Haze Transparent Cellulose Fiber Film via a Biomimetic Approach

Eco-friendly Cellulose Nanofibrils with High Surface Charge and Aspect Ratio for Nanopaper Films with Ultrahigh Toughness and Folding Endurance

Constructing a "Micro-Nano Collaboration" Network Via Disk-Milling: Value-enhanced Utilization of Flexible Temperature-Resistant Cellulose Insulation Films.

Anisotropic, Transparent Films with Aligned Cellulose Nanofibers

Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells

Super foldable transparent paper by regulating the multi-scale structure of cellulose fibers

Micro- and nano-fibrils of manau rattan and solvent-exchange-induced high-haze transparent holocellulose nanofibril film

A cellulose-based light-management film incorporated with benzoxazine resin/tannic acid exhibiting UV/blue light double blocking and enhanced mechanical property

High-performance green electronic substrate employing flexible and transparent cellulose films

Biosustainable Multiscale Transparent Nanocomposite Films for Sensitive Pressure and Humidity Sensors

A partial dissolution-regeneration strategy for preparing water-resistant composite film of cellulose I and cellulose II with high light transmittance and adjustable haze

Contribution of Hemicellulose to Cellulose Nanofiber-Based Nanocomposite Films with Enhanced Strength, Flexibility and UV-blocking Properties

Tough And Moldable Sustainable Cellulose‐Based Structural Materials via Multiscale Interface Engineering

Eco-Friendly Bioinspired Interface Design for High-Performance Cellulose Nanofibril/Carbon Nanotube Nanocomposites

Highly transparent, hydrophobic, and durable anisotropic cellulose films as electronic screen protectors

Transparent Cellulose/Multi-Walled Carbon Nanotube Hybrids with Improved Ultraviolet-Shielding Properties Prepared from Cotton Textile Waste

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Construction of Transparent Cellulose-Based Nanocomposite Papers and Potential Application in Flexible Solar Cells

In situ self-assembly of pulp microfibers and nanofibers into a transparent, high-performance and degradable film

Large-Scale Engineerable Films Tailored with Cellulose Nanofibrils for Lighting Management and Thermal Insulation