Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Micro- and nano-fibrils of manau rattan and solvent-exchange-induced high-haze transparent holocellulose nanofibril film

Constructing a "Micro-Nano Collaboration" Network Via Disk-Milling: Value-enhanced Utilization of Flexible Temperature-Resistant Cellulose Insulation Films.

Eco-friendly Cellulose Nanofibrils with High Surface Charge and Aspect Ratio for Nanopaper Films with Ultrahigh Toughness and Folding Endurance

Sustainable Multiscale High-Haze Transparent Cellulose Fiber Film via a Biomimetic Approach

Anisotropic, Transparent Films with Aligned Cellulose Nanofibers

Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

Eco-Friendly Bioinspired Interface Design for High-Performance Cellulose Nanofibril/Carbon Nanotube Nanocomposites

Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State

High-Consistency Mechano-Enzymatic Fibrillation of Bamboo Pulp Fibers to Produce Precursors for Highly Fibrillated Cellulose and Dense Films with Multifunctionalities

Large-Scale Engineerable Films Tailored with Cellulose Nanofibrils for Lighting Management and Thermal Insulation

Nanocomposite films based on xylan-rich hemicelluloses and cellulose nanofibers with enhanced mechanical properties

A partial dissolution-regeneration strategy for preparing water-resistant composite film of cellulose I and cellulose II with high light transmittance and adjustable haze

Sustainable route to prepare functional lignin-containing cellulose nanofibrils

P/N/S synergistic flame retardant holocellulose nanofibrils efficiently pretreated from ternary deep eutectic solvents

"Micro-to-nano": Reengineering of jute for constructing cellulose nanofibers as a next-generation biomaterial

Hemicellulose and Nano/Microfibrils Improving the Pliability and Hydrophobic Properties of Cellulose Film by Interstitial Filling and Forming Micro/Nanostructure

Transparent, thermal stable, water resistant and high gas barrier films from cellulose nanocrystals prepared by reactive deep eutectic solvents

Facile Extraction of Cellulose Nanofibrils (Cnfs) from Wood Using Acidic Ionic Liquid-catalyzed Organosolv Pretreatment Followed by Ultrasonic Processing

Nanocellulose with unique character converted directly from plants without intensive mechanical disintegration

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Holocellulose nanofibrils assisted exfoliation of boron nitride nanosheets for thermal management nanocomposite films