Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Robust cellulose nanofibrils reinforced poly(methyl methacrylate)/polystyrene binary blend composites with pebble‐shaped structure using Pickering emulsion gel

Transparent and Strong Polymer Nanocomposites Generated from Pickering Emulsion Gels Stabilized by Cellulose Nanofibrils.

Cellulose nanofibril aerogels reinforcing polymethyl methacrylate with high optical transparency

Dispersion of Cellulose Nanofibers in Methacrylate-Based Nanocomposites

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Structure and mechanical properties of Poly(styrene-co-acrylate)/cellulose nanocrystals co-continuous composites via one-pot pickering emulsion polymerization

PMMA/TEMPO-oxidized cellulose nanofiber nanocomposite with improved mechanical properties, high transparency and tunable birefringence

Reinforcing Poly(methyl methacrylate) with Bacterial Cellulose Nanofibers Chemically Modified with Methacryolyl Groups

Excellent Rheological Performance and Impact Toughness of Cellulose Nanofibers/pla/ionomer Composite

Dual Nanofillers Reinforced Polymer-Inorganic Nanocomposite Film with Enhanced Mechanical Properties

Facile Preparation of Cellulose Fiber Reinforced Polypropylene Using Hybrid Filler Method

Development of eco-friendly modified cellulose nanofiber reinforced polystyrene nanocomposites: thermal, mechanical, and optical properties

Well-Dispersed Cellulose Nanofiber in Low Density Polyethylene Nanocomposite by Liquid-Assisted Extrusion

Preparation of Polymer Nanocomposites with Enhanced Mechanical Properties Using Hybrid of Graphene and Partially Wrapped Multi-Wall Carbon Nanotube As Nanofiller

Enteromorpha cellulose micro-nanofibrils/poly(vinyl alcohol) based composite films with excellent hydrophilic, mechanical properties and improved thermal stability

Biodegradable Poly(butylene adipate- co -terephthalate) Nanocomposites Reinforced with In Situ Fibrillated Nanocelluloses

In-situ Formation of Thermo-Responsive Petal-Like Cellulose Nanocrystals Hybridized Particles Towards Optimizing Mechanical, Rheological and Dielectric Properties of Polylactic Acid Blends.

Carboxymethyl Cellulose Nanofibrils with a Treelike Matrix: Preparation and Behavior of Pickering Emulsions Stabilization

New nanocomposite materials reinforced with flax cellulose nanocrystals in waterborne polyurethane.

Compatibilization of poly(methyl methacrylate) and cellulose nanocrystals through co‐continuous phase to enhance the thermomechanical properties

Thermoformable and Transparent One-Component Nanocomposites Based on Surface Grafted Cellulose Nanofiber