Abstract:The insufficient ionic conductivity of oxide-based solid electrolytes and the large interfacial resistance between the cathode material and the solid electrolyte severely limit the performance of room-temperature all-solid-state sodium rechargeable batteries. A NASICON solid electrolyte Na3.4Zr1.9Zn0.1Si2.2P0.8O12, with superior room-temperature conductivity of 5.27 × 10–3 S cm–1, is achieved by simultaneous substitution of Zr4+ by aliovalent Zn2+ and P5+ by Si4+ in Na3Zr2Si2PO12. The bulk conductivity and grain boundary conductivity of Na3.4Zr1.9Zn0.1Si2.2P0.8O12 are nearly 20 times and almost 50 times greater than those of pristine Na3Zr2Si2PO12, respectively. The FeS2||polydopamine-Na3.4Zr1.9Zn0.1Si2.2P0.8O12||Na all-solid-state sodium batteries, with a polydopamine modification thin layer between the solid electrolyte and the cathode, maintain a high reversible capacity of 236.5 mAh g–1 at a 0.1 C rate for 100 cycles and a capacity of 133.1 mAh g–1 at 0.5 C for 300 cycles, demonstrating high performance for all-solid-state sodium batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c01432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c01432</a>.Experimental section; XRD, NPD, SEM, and EIS measurements for different solid electrolyte materials; STEM-EDS and DC polarization measurement for Zn0.1 sample; EDS measurement for Zn0.1 sample before and after contact with sodium; unit cell parameters of different solid electrolyte materials; structural parameters of different solid electrolyte materials; BVEL analysis and the comparison of bottleneck sizes; conductivities, activation energies, and relative densities of different solid electrolyte materials; FTIR measurement for Zn0.1 pellet with and without PDA layer; charge–discharge curves of FeS2||Zn0.1||Na all-solid-state battery; comparison of conductivities and battery performances reported in the literature and in this work; cross-sectional images of the cathode/electrolyte interface before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c01432/suppl_file/nz0c01432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Room-Temperature All-Solid-State Sodium Battery Based on Bulk Interfacial Superionic Conductor

An electrochemically stable homogeneous glassy electrolyte formed at room temperature for all-solid-state sodium batteries

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

Room-Temperature All-solid-state Rechargeable Sodium-ion Batteries with a Cl-doped Na3PS4 Superionic Conductor

Room-temperature All-Solid-state Sodium Batteries with Robust Ceramic Interface Between Rigid Electrolyte and Electrode Materials

NaYSi<sub>4</sub>O<sub>12</sub>: A sodium superionic conductor for ultrastable quasi-solid-state sodium-ion batteries

Theoretical Prediction of Spinel Na<sub>2</sub>In<i><sub>x</sub></i>Sc<sub>0.666-<i>x</i></sub>Cl<sub>4</ sub> and Rock-Salt Na<sub>3</sub>In<sub>1-<i>x</i></sub>Sc<i><sub>x</sub></i>Cl<sub>6</sub> Superionic Conductors for All-Solid-State Sodium-Ion Batteries

Theoretical Prediction of Spinel Na2InxSc0.666−xCl4 and Rock‐Salt Na3In1−xScxCl6 Superionic Conductors for All‐Solid‐State Sodium‐Ion Batteries

A Stable Cathode-Solid Electrolyte Composite for Long-Cycle-Life, High Voltage Solid-State Sodium-ion Batteries

Sc-doping in Na3Zr2Si2PO12 electrolytes enables preeminent performance of solid-state sodium batteries in a wide temperature range

Na5YSi4O12: A sodium superionic conductor for ultrastable quasi-solid-state sodium-ion batteries

Plastic Crystal Polymer Electrolytes with Anion-Trapping Boron Moieties for Room Temperature All-Solid-State Sodium Batteries

High-Entropy Solid-State Na-Ion Conductor for Stable Sodium-Metal Batteries.

High-Performance All-Inorganic Solid-State Sodium-Sulfur Battery.

A Sulfide‐Based Solid Electrolyte With High Humid Air Tolerance for Long Lifespan All‐Solid‐State Sodium Batteries

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Phase‐Transition Interlayer Enables High‐Performance Solid‐State Sodium Batteries with Sulfide Solid Electrolyte

A Niobium-Substituted Sodium Superionic Conductor with Conductivity Higher Than 5.5 Ms Cm−1 Prepared by Solution-Assisted Solid-State Reaction Method

Photopolymerized Gel Electrolyte with Unprecedented Room‐Temperature Ionic Conductivity for High‐Energy‐Density Solid‐State Sodium Metal Batteries

Ultrastable All-Solid-State Sodium Rechargeable Batteries

High performance room temperature all-solid-state Na-Se S battery with Na3SbS4–coated cathode via aqueous solution