Abstract:Sodium batteries have drawn increasing attention from multiple researchers owing to the abundant reserves and low cost of sodium resources. However, traditional sodium batteries based on organic solvent electrolyte systems have safety risks. Thus, the utilization of solid electrolyte materials instead of organic electrolytes could effectively resolve safety issues and ensure the safe performance of the battery. Solid sodium-ion battery is a promising energy storage device. The sodium ion solid-state electrolytes mainly includes Na-beta-Al2O3, Na super ionic conductor (NASICON), sulfide, polymer, and borohydride. Inorganic solid electrolytes have the advantage of ionic conductivity compared with polymer solid electrolyte. This paper summarizes the research progress on three common inorganic sodium ion solid electrolytes: Na-beta-Al2O3, NASICON, and sulfide. Research efforts have mainly focused on increasing ionic conductivity and interface stability. Na-beta-Al2O3 has been successfully commercialized in high-temperature Na-S and ZEBRA batteries with molten electrodes. Pure (beta ''-Al2O3 is difficult to prepare owing to its low thermodynamic stability. The synthesized (beta ''-Al2O3 based on traditional solid-state reaction generally contains impurities such as (beta-Al2O3 and NaAlO2 (around the boundaries). Further improvements are required to develop favorable methods for fabricating pure (beta ''-Al2O3 with high production yield, low cost, and well-controlled microstructure. NASICON, one of the most promising ionic conductors for solid sodium-ion batteries, has attracted considerable attention for its high ionic conductivity at room temperature. The general method to enhance ionic conductivity is to increase the bottleneck size by introducing proper substituents. However, the substitution of synthetic elements could result in different optimal calcination temperatures, which would lead to a change in the density of ceramic sintering. (beta ''-Al2O3 and NASICON have higher ionic conductivity at room temperature but cannot achieve good performance in the field of high power densities and long-term cycling owing to the poor interface contact with electrode materials. Because the high polarizability and large ionic radius of sulfur atoms weaken the interaction between skeleton and sodium ions, sulfide solid electrolytes often provide higher ionic conductivity at room temperature than analogous oxides. At the same time, sulfide solid electrolytes can be easily pressed into a mold at room temperature. However, sulfide electrolytes have low chemical stability in air because of hydrolysis by water molecules with the generation of H2S gas, which should be handled in inert gas atmosphere. In conclusion, this review discusses the recent progress in different aspects of ionic conductivity and interface stability.

A family of dual-anion-based sodium superionic conductors for all-solid-state sodium-ion batteries

Design principles for sodium superionic conductors

A Na+ Superionic Conductor for Room-Temperature Sodium Batteries

Superionic amorphous NaTaCl6 halide electrolyte for highly reversible all-solid-state Na-ion batteries

Screening Platform for Promising Na Superionic Conductors for Na-Ion Solid-State Electrolytes

Na3NH2B12H12 As High Performance Solid Electrolyte for All-Solid-state Na-ion Batteries

Halide Heterogeneous Structure Boosting Ionic Diffusion and High‐Voltage Stability of Sodium Superionic Conductors

NaYSi<sub>4</sub>O<sub>12</sub>: A sodium superionic conductor for ultrastable quasi-solid-state sodium-ion batteries

Room-Temperature All-Solid-State Sodium Battery Based on Bulk Interfacial Superionic Conductor

LaCl3-based sodium halide solid electrolytes with high ionic conductivity for all-solid-state batteries

Na5YSi4O12: A sodium superionic conductor for ultrastable quasi-solid-state sodium-ion batteries

Designing a Novel Electrolyte Na3.2Hf2Si2.2P0.8O11.85F0.3 for All‐Solid‐State Na‐O2 Batteries

A Dual Anion Chemistry-Based Superionic Glass Enabling Long-Cycling All-Solid-State Sodium-Ion Batteries

Research Progress in Inorganic Solid-State Electrolytes for Sodium-Ion Batteries

Designing a Novel Electrolyte Na3.2Hf2Si2.2P0.8O11.85F0.3 for All-Solid-State Na-O-2 Batteries

Design Principles for Cation‐Mixed Sodium Solid Electrolytes

Sodium Carbazolide and Derivatives As Solid-State Electrolytes for Sodium-Ion Batteries.

High-power all-solid-state batteries using sulfide superionic conductors

Selenides Based Sodium Superionic Conductors

Theoretical Prediction of Spinel Na<sub>2</sub>In<i><sub>x</sub></i>Sc<sub>0.666-<i>x</i></sub>Cl<sub>4</ sub> and Rock-Salt Na<sub>3</sub>In<sub>1-<i>x</i></sub>Sc<i><sub>x</sub></i>Cl<sub>6</sub> Superionic Conductors for All-Solid-State Sodium-Ion Batteries

Recent Progress on Dominant Sulfide‐Type Solid‐State Na Superionic Conductors for Solid‐State Sodium Batteries