Effect of mesoscale phase contrast on fatigue-delaying behavior of self-healing hydrogels

Xueyu Li,Kunpeng Cui,Takayuki Kurokawa,Ya Nan Ye,Tao Lin Sun,Chengtao Yu,Costantino Creton,Jian Ping Gong

DOI: https://doi.org/10.1126/sciadv.abe8210

IF: 13.6

2021-04-16

Science Advances

Abstract:The multilevel fatigue resistance mechanism of tough and self-healing hydrogels with a hierarchical structure was revealed.

multidisciplinary sciences

What problem does this paper attempt to address?

Mesoscale Bicontinuous Networks in Self-Healing Hydrogels Delay Fatigue Fracture.

Xueyu Li,Kunpeng Cui,Tao Lin Sun,Lingpu Meng,Chengtao Yu,Liangbin Li,Costantino Creton,Takayuki Kurokawa,Jian Ping Gong

DOI: https://doi.org/10.1073/pnas.2000189117

IF: 11.1

2020-01-01

Proceedings of the National Academy of Sciences

Abstract:Significance Muscles, composed of exquisite hierarchical structures, exhibit high fatigue resistance and can resist crack propagation even after injury. The mechanism of the hierarchical structures on suppressing crack advance under reciprocating movement is poorly understood. Tough and self-healing hydrogels are good candidates as simplified model systems for studying the mechanical behaviors of load-bearing biotissues. Here, we report that polyampholyte hydrogels, having a hierarchical structure, demonstrate high fatigue resistance through a synergistic effect between different scales. Such an antifatigue mechanism based on hierarchical structure not only gives important hints to understand fatigue-resistant behavior of biotissues with complex hierarchical structures, but also provides design strategy for tough and fatigue-resistant hydrogels, by forming multiscale network structures using noncovalent bonds as building blocks.
Stress Relaxation and Underlying Structure Evolution in Tough and Self-Healing Hydrogels.

Kunpeng Cui,Ya Nan Ye,Chengtao Yu,Xueyu Li,Takayuki Kurokawa,Jian Ping Gong

DOI: https://doi.org/10.1021/acsmacrolett.0c00600

IF: 5.8

2020-01-01

ACS Macro Letters

Abstract:The tough and self-healing hydrogels composed of polyampholytes (PA gels) are drawing great attention due to their multiscale structures and the resultant multiple mechanical properties. This work studies the stress relaxation behavior of PA gels and reveals the underlying multiscale structure evolutions by combining birefringence and small-angle X-ray scattering measurements. The PA gels show a fast and strong stress relaxation that obeys the stress-optical rule, which could be associated with relaxation of chain segment orientation by the breaking of ionic bonds. A slow and weak relaxation of phase structure (∼100 nm) is also observed, which tells that the stress redistributes and local strain amplification gradually builds in the phase network at long relaxation times as a result of synergetic breaking of multiple ionic bonds. This work gives insight into exploring the formation of the crack precursor that is important in the fracture and fatigue of self-healing hydrogels.
Multiscale Energy Dissipation Mechanism in Tough and Self-Healing Hydrogels.

T. Sun,K. Nakajima,X. Liang,Liang Chen,J. Gong,T. Kurokawa,Y. Ye,Kunpeng Cui

DOI: https://doi.org/10.1103/PhysRevLett.121.185501

IF: 8.6

2018-10-31

Physical Review Letters

Abstract:Understanding the energy dissipation mechanism during deformation is essential for the design and application of tough soft materials. We show that, in a class of tough and self-healing polyampholyte hydrogels, a bicontinuous network structure, consisting of a hard network and a soft network, is formed, independently of the chemical details of the hydrogels. Multiscale internal rupture processes, in which the double-network effect plays an important role, are found to be responsible for the large energy dissipation of these hydrogels.

Medicine,Physics,Materials Science
Role of Hierarchy Structure on the Mechanical Adaptation of Self-Healing Hydrogels under Cyclic Stretching.

Xueyu Li,Kunpeng Cui,Yong Zheng,Ya Nan Ye,Chengtao Yu,Wenqi Yang,Tasuku Nakajima,Jian Ping Gong

DOI: https://doi.org/10.1126/sciadv.adj6856

IF: 13.6

2023-01-01

Science Advances

Abstract:Soft materials with mechanical adaptability have substantial potential for various applications in tissue engineering. Gaining a deep understanding of the structural evolution and adaptation dynamics of soft materials subjected to cyclic stretching gives insight into developing mechanically adaptive materials. Here, we investigate the effect of hierarchy structure on the mechanical adaptation of self-healing hydrogels under cyclic stretching training. A polyampholyte hydrogel, composed of hierarchical structures including ionic bonds, transient and permanent polymer networks, and bicontinuous hard/soft-phase networks, is adopted as a model. Conditions for effective training, mild overtraining, and fatal overtraining are demonstrated in soft materials. We further reveal that mesoscale hard/soft-phase networks dominate the long-term memory effect of training and play a crucial role in the asymmetric dynamics of compliance changes and the symmetric dynamics of hydrogel shape evolution. Our findings provide insights into the design of hierarchical structures for adaptive soft materials.
Effect of Structure Heterogeneity on Mechanical Performance of Physical Polyampholytes Hydrogels

Kunpeng Cui,Ya Nan Ye,Tao Lin Sun,Liang Chen,Xueyu Li,Takayuki Kurokawa,Tasuku Nakajima,Takayuki Nonoyama,Jian Ping Gong

DOI: https://doi.org/10.1021/acs.macromol.9b01676

IF: 5.5

2019-01-01

Macromolecules

Abstract:Recent studies reported a multiscale structure in tough and self-healing hydrogels containing physical associations. For example, a type of tough and self-healing hydrogel from charge-balanced polyampholytes (PA) has a mesoscale bicontinuous double network structure with structural length around 400 nm. This mesoscale network structure plays an essential role in the multistep rupture process, which leads to the high toughness of PA hydrogels. In this work, by using an osmotic stress method, we symmetrically studied how the relative strength of soft and hard networks and the strength of ionic bonds influence the property of PA gels. We found that increasing osmotic stress of the bath solution triggers the structure transition from bicontinuous double network structure to a homogeneous structure, which drives the concurrently opaque-transparent transition in optical property and viscoelastic-glassy transition in mechanical behavior. The gels around the structural transition point were found to possess both high toughness (fracture energy of 7200 J m(-2)) and high stiffness (Young's modulus of 12.9 MPa), which is a synergy of soft network and hard network of the bicontinuous structure. Our work not only provides an approach to tune the structure and property of physical hydrogels through tuning physical association but also gives a demo to investigate their relationships, yet another step forward gives inspiration to design a new type of tough and self-healing materials around the structural transition point.
High Fracture Efficiency and Stress Concentration Phenomenon for Microgel-Reinforced Hydrogels Based on Double-Network Principle

Jian Hu,Takayuki Kurokawa,Tasuku Nakajima,Tao Lin Sun,Tiffany Suekama,Zi Liang Wu,Song Miao Liang,Jian Ping Gong

DOI: https://doi.org/10.1021/ma301933x

IF: 5.5

2012-01-01

Macromolecules

Abstract:Double-network hydrogels (DN gels) have aroused considerable interest because of their excellent mechanical strength and toughness, low sliding friction, good biocompatibility, as well as wide tunability in components. By revisiting DN gels, we provide an ingenious way to fabricate a kind of strong and tough microgel-reinforced hydrogels (MR gels), that densely cross-linked polyelectrolyte microgels of poly(2-acrylamido-2-methylpropanesulfonic sodium) (PNaAMPS) (replacing the densely crosslinked PNaAMPS macro-network for conventional DN gels) are incorporated into sparsely cross-linked neutral polyacrylamide (PAAm) matrix. The structure of MR gels can be considered as a two-phase composite, where the disperse phase is the rigid DN microgels, and the continuous phase is the soft PAAm matrix. Similar to DN gels, MR gels show the irreversible energy dissipation in the hysteresis measurement, demonstrating the permanent fracture of the brittle PNaAMPS phase. Thus, the discontinuous brittle phase also serves as sacrificial bonds. Through quantitative comparison of the hysteresis curves with DN gels and monitoring the morphology change of the embedded microgels in MR gels during the real-time stretching process, we conclude that the DN microgels in MR gels show four times higher in fracture efficiency of the sacrificial bonds than bulk DN gels at the same strain, as a result of the stress concentration around the microgels.
Structure Frustration Enables Thermal History-Dependent Responsive Behavior in Self-Healing Hydrogels

Chengtao Yu,Kunpeng Cui,Honglei Guo,Ya Nan Ye,Xueyu Li,Jian Ping Gong

DOI: https://doi.org/10.1021/acs.macromol.1c01461

IF: 5.5

2021-10-29

Macromolecules

Abstract:Biological soft tissues usually execute their functions via nonequilibrium and dynamic structural transformations. By contrast, functional hydrogels are mainly constructed by implementing static and equilibrium structures in the polymer network. Here, using polyampholyte hydrogel as a model system, we demonstrated that the nonequilibrium structure transformation in self-healing hydrogels enables the gels with many new features, including thermal history dependence, quick and asymmetric thermal response (instant transparent-to-turbid transition but slow turbid-to-transparent transition), tunable cloud point, tunable recovery time, and tiny changes in sample size and mechanical performance. These features make them distinct to conventional thermoresponsive hydrogels based on thermodynamic equilibrium and endow them with a new type of promising thermoresponsive materials. We revealed the structure change and studied the role of the thermal protocol on this thermoresponsive behavior by combining ultraviolet spectrum, small-angle X-ray scattering, rheology, and mechanical measurements. We also presented two conceptual applications of this thermoresponsive hydrogel in thermal imaging and security paper. We believe that this work will inspire future research on creating functional hydrogels via nonequilibrium structure transformations.

polymer science
Predicting Fatigue Damage in Hydrogels Through Force‐Induced Luminescence Enhancement

Qi Ma,Jiaofeng Xiong,Yawen Zhou,Shilong Zhang,Jiayu Wang,Weizheng Li,Xiuyang Zou,Feng Yan

DOI: https://doi.org/10.1002/adma.202413874

IF: 29.4

2024-11-11

Advanced Materials

Abstract:Tough hydrogels with force‐induced confined luminescence enhancement of carbonated polymer quantum dot (CPD) clusters were prepared to realize the visualization of fracture process and the monitoring of fatigue damage. The enhanced interactions between the clusters and the polymer in the confined space inhibit the non‐radiative leaps and promote the radiative leaps to quantify the fatigue damage into optical signals. Fatigue damage of polymers occurs under long‐term load cycling, resulting in irreversible fracture failure, which is difficult to predict. The real‐time monitoring of material fatigue damage is of great significance. Here, tough hydrogels are prepared with force‐induced confined luminescence enhancement of carbonated polymer quantum dot (CPD) clusters to realize the visualization of fracture process and the monitoring of fatigue damage. The enhanced interactions induced by force between the clusters and the polymer in the confined space inhibit the non‐radiative leaps and promote the radiative leaps to quantify the fatigue damage into optical signals. Rigid CPDs with abundant active sites on the surface can form dynamic reversible bonds with polymer and dissipate stress concentration, which significantly enhances the crack propagation strain (8000%) and fracture energy (26.4 kJ m−2) of hydrogels. CPD hydrogels have a wide range of applications in novel information encryption and luminescent robotics.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Metal Welding-Inspired Phase Change Self-Healing Strategy Applied to High-Modulus Hydrogel Composites

Yuanlai Fang,Qianwei Liu,Li Yang,Zhongxiang Bai,Jingjiang Wei,Kun Yang,Qingyuan Wang,Jianyong Ouyang,Jiaxi Cui

DOI: https://doi.org/10.1016/j.cej.2024.156791

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:The self-healing efficiencies of polymers are inversely proportional to their modulus, as the recovery of the polymer network heavily relies on the mobility of polymer chains. Therefore, reinvigorated by the metal welding, we have developed S-PAM-SA-x supercooling hydrogels, consisting of polyacrylamide hydrogel networks and inorganic CH3COONa & sdot;3H2O phase change materials. Subsequently, rigid self-healing H-PAM-SA-x composites were achieved via self-actuated crystallization-related phase change from the supersaturated hydrogels, resulting in a significant enhancement in mechanical properties. Notably, Young's modulus experienced an astonishing increase from 0.07 to 387.1 MPa. The H-PAM-SA-130 % composites demonstrated satisfactory self-healing performance based on the phase change of melting and crystallization, as the dominant mechanical carrier was found to be the crystal lattice rather than the PAM network. Leveraging the reversible nature of melting and crystallization, the same position can undergo multiple healing cycles without compromising self-healing efficiencies. Moreover, this distinctive dynamic phase change process significantly expands the range of functional applications, encompassing self-healing, adhesion, and patterns' replication among others.
Phase Separation Behavior in Tough and Self-Healing Polyampholyte Hydrogels

Kunpeng Cui,Ya Nan Ye,Tao Lin Sun,Chengtao Yu,Xueyu Li,Takayuki Kurokawa,Jian Ping Gong

DOI: https://doi.org/10.1021/acs.macromol.0c00577

IF: 5.5

2020-01-01

Macromolecules

Abstract:Polyampholyte hydrogels (PA gels) are drawing great attention for their excellent mechanical properties including self-healing, high toughness, and fatigue resistance. These mechanical performances are found to be attributed to the hierarchical structure of the PA gels, consisting of reversible ionic bonds at the 1 nm scale, permanent polymer network at the 10 nm scale, and bicontinuous phase network at the 100 nm scale. In this work, we systematically studied the phase network formation of these gels aiming to answer the following three questions: (1) how the phase separation occurs? (2) what determines the phase structure? and (3) is this structure in thermodynamic equilibrium or not? Our results show that the phase separation occurs during dialysis of counterions from the gels and it is driven by the Coulombic and hydrophobic interactions. The phase size d(0) and the number of aggregated chains in a unit cell of the phase structure n scale with the molecular weight of the partial chain between permanent effective cross-linking M-eff as d(0) similar to M-eff and n similar to M-eff(2), respectively. A chemical cross-linker and topological entanglement suppress phase separation, while hydrophobic interaction favors phase separation. An intrinsic correlation between the polymer density difference (Delta rho) between two phases and d(0) is observed (Delta rho similar to d(0)(2)) as a result of the competition between the driving force to induce phase separation and the resistance to suppress the phase separation. The phase-separated structure is metastable, which is locally trapped by strong intermolecular interactions.
Ultra‐Tough Self‐Healing Hydrogel via Hierarchical Energy Associative Dissipation

Zhi Zhao,Yurong Li,Haibin Wang,Yupeng Shan,Xuemei Liu,Mengfei Wu,Xinping Zhang,Xiaoyan Song

DOI: https://doi.org/10.1002/advs.202303315

IF: 15.1

2023-07-30

Advanced Science

Abstract:This work explores a novel strategy based on sequential self‐assembly to rationally create ultra‐tough self‐healing hydrogels, which for the first time allows for demand‐oriented precursor design by revealing the relationship between the molecular structure of reactants and the mechanical properties of hydrogels. Libraries of ultra‐tough hydrogels are prepared, whose mechanical properties exceed the best‐known records. Owing to high water content and homogeneous texture, conventional hydrogels hardly reach satisfactory mechanical performance. Tensile‐resistant groups and structural heterogeneity are employed to fabricate tough hydrogels. However, those techniques significantly increase the complexity and cost of material synthesis, and have only limited applicability. Here, it is shown that ultra‐tough hydrogels can be obtained via a unique hierarchical architecture composed of chemically coupled self‐assembly units. The associative energy dissipation among them may be rationally engineered to yield libraries of tough gels with self‐healing capability. Tunable tensile strength, fracture strain, and toughness of up to 19.6 MPa, 20 000%, and 135.7 MJ cm−3 are achieved, all of which exceed the best known records. The results demonstrate a universal strategy to prepare desired ultra‐tough hydrogels in predictable and controllable manners.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
A Transparent, Tough Self-Healing Hydrogel Based On A Dual Physically And Chemically Triple Crosslinked Network

Shengping Dai,Shuai Wang,Xu Dong,Xiuzhu Xu,Xiaoting Cao,Yuewen Chen,Xiaoshuang Zhou,Jianning Ding,Ningyi Yuan

DOI: https://doi.org/10.1039/c9tc02697e

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:Self-healing hydrogels are a new type of functional material that have been widely used in many fields. Although various self-healing hydrogels have been reported, the simultaneous achievement of transparency, toughness, good recovery, and superior self-healing properties is still challenging. Here, we designed a new hydrogel with a dual physical and chemical triple crosslinked network. The triple crosslinked network hydrogel after freeze-thaw cycling exhibited higher stability, toughness and better tensile properties than those provided by the dual crosslinked network in the as-prepared hydrogel. In addition, the triple crosslinked network structure provided reliable recovery performance and superior self-healing ability without requiring external stimuli. With the combination of high transparency, toughness, good recovery, and self-healing properties, we demonstrated the applicability of the hydrogel in resistance and capacitance sensors, which can be applied to a wide range of human motion monitoring and intelligent wearable devices.
Mechanically Strong and Tough Hydrogels with Excellent Anti-Fatigue, Self-Healing and Reprocessing Performance Enabled by Dynamic Metal-Coordination Chemistry

Xiao-Hui Wang,Fei Song,Juan Xue,Dan Qian,Xiu-Li Wang,Yu-Zhong Wang

DOI: https://doi.org/10.1016/j.polymer.2018.08.063

IF: 4.6

2018-01-01

Polymer

Abstract:Strong and tough hydrogels with good self-healing property and processability are of great interest in the recent decades, however, how to simultaneously realize high mechanical properties and self-healing performance still remains a challenge. Here, we report a fully physical dual-network (DN) hydrogel consisting of poly(acrylic acid) (PAA) network crosslinked by ferric ions and chitosan (CS) network crosslinked with calcium ions and chain entanglement. The resulting hydrogel displays a tensile strength of 12.2 MPa and a tensile strain of 1290%. Under the strain of 1000%, 35.7 MJm(-3) of energy can be dissipated by the hydrogel network. Due to the reversibility of the physical crosslinks, particularly, the hydrogel presents high self-recovery and self-healing performances, that is, its tensile strength is recovered to 2.3 MPa after healing. Additionally, even if fragmented, the hydrogel can still acquire a tensile stress of 4.3 MPa after re-processing. This finding indicates the effective strategy to construct high-performance hydrogels can bring benefits to more soft materials.
Enhance Fracture Toughness and Fatigue Resistance of Hydrogels by Reversible Alignment of Nanofibers

Danqi Sun,Yang Gao,Yifan Zhou,Meng Yang,Jian Hu,Tongqing Lu,Tiejun Wang

DOI: https://doi.org/10.1021/acsami.2c16273

2022-10-25

Abstract:Biological tissues, such as heart valve, tendon, etc., possess excellent mechanical properties, which arises from their inherent anisotropic arrangement of soft and hard phases. Inspired by the anisotropic structures, many methods have been developed to synthesize hydrogels that can achieve mechanical properties comparable to biological tissues. Here, we describe a new method to enhance fracture toughness and fatigue resistance of hydrogels by introducing nanofibers which can reversibly align...

materials science, multidisciplinary,nanoscience & nanotechnology
Fatigue behaviors of physical hydrogels based on hydrogen bonds

Xueqi Zhao,Jingping Wu,Yifan Zhou,Yudong Pan,Tongqing Lu,Xiaoping Song,Jian Hu

DOI: https://doi.org/10.1016/j.eml.2021.101320

IF: 4.728

2021-07-01

Extreme Mechanics Letters

Abstract:<p>Physical hydrogels, composed of non-covalently crosslinking three dimensional polymer networks and a large amount of water, have drawn much attention due to their excellent mechanical properties such as high toughness, self-healing, self-recovery, and shape-memory. But the fatigue behaviors of physical hydrogels, especially the role of non-covalent bonds in the fatigue process, have not been well studied. Here we study fatigue damage and fatigue fracture of two kinds of physical hydrogels based on hydrogen bonding (H-bonding): poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) gels with weak H-bonding (weak gels) and PVA/PAA-LiCl gels with strong H-bonding (strong gels). For the fatigue damage of uncut samples, both the weak and strong gels are fatigue strengthened in small deformation by stretch-induced H-bonding rearrangement, but are fatigue damaged in large deformation by chain sliding. For the fatigue fracture of precut samples, both the weak and strong gels show no measurable fatigue threshold, but the strong gel can mitigate crack growth. These results reveal the intrinsically weak non-covalent bonds can't effectively increase the fatigue resistance of physical hydrogels. This work provides a deep perspective for developing novel anti-fatigue hydrogels.</p>

mechanics,materials science, multidisciplinary
Investigating Temperature‐Dependent Microscopic Deformation in Tough and Self‐healing Hydrogel Using Time‐Resolved USAXS

Zhaoyang Chu,Kaining He,Siqi Huang,Wenhua Zhang,Xueyu Li,Kunpeng Cui

DOI: https://doi.org/10.1002/marc.202400327

IF: 5.006

2024-06-06

Macromolecular Rapid Communications

Abstract:Tough and self‐healing hydrogels are typically sensitive to loading rates or temperatures due to the dynamic nature of non‐covalent bonds. Understanding the structure evolution under varying loading conditions can provide valuable insights for developing new tough soft materials. In this study, polyampholyte hydrogel with a hierarchical structure is used as a model system. The evolution of the microscopic structure during loading is investigated under varied loading temperatures. By combining ultra‐small angle X‐ray scattering and Mooney–Rivlin analysis, it is elucidated that the deformation of bicontinuous hard/soft phase networks is closely correlated with the relaxation dynamics or strength of non‐covalent bonds. At high loading temperatures, the gel is soft and ductile, and large affine deformation of the phase‐separated networks is observed, correlated with the fast relaxation dynamics of non‐covalent bonds. At low loading temperatures, the gel is stiff, and non‐affine deformation occurs from the onset of loading due to the substantial breaking of non‐covalent bonds and limited chain mobility as well as weak adaptation of phase deformation to external stretch. This work provides an in‐depth understanding of the relationship between structure and performance of tough and self‐healing hydrogels. This article is protected by copyright. All rights reserved

polymer science
Human-tissue-inspired anti-fatigue-fracture hydrogel for a sensitive wide-range human–machine interface

Gehong Su,Jie Cao,Xueqian Zhang,Yulin Zhang,Shuya Yin,Liyang Jia,Quanquan Guo,Xinxing Zhang,Junhua Zhang,Tao Zhou

DOI: https://doi.org/10.1039/c9ta08111a

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:An effective and simple strategy is proposed to prepare a multifunctional hydrogel that shows ultra-stretchable (>2900%), anti-fatigue-fracture, and self-healable properties.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Highly Stretchable Nanocomposite Hydrogels with Outstanding Antifatigue Fracture Based on Robust Noncovalent Interactions for Wound Healing

Mengyuan Zhang,Jing Yu,Kaixiang Shen,Ruyue Wang,Jiaqiang Du,Xiaodan Zhao,Yuxuan Yang,Kai Xu,Qiang Zhang,Yanfeng Zhang,Yilong Cheng

DOI: https://doi.org/10.1021/acs.chemmater.1c01790

IF: 10.508

2021-08-12

Chemistry of Materials

Abstract:Stable mechanical properties under cyclic mechanical loads are critical for the applications of hydrogels in flexible electronics and tissue engineering. However, most existing tough hydrogels still face obvious notch sensitivity and suffer from fatigue fracture under continuous load. Designing hydrogels with multifunctional properties, such as high stretchability, toughness, and excellent antifatigue fracture, through a facile strategy is on demand. In this work, the nanocomposite hydrogels with comprehensive mechanical properties were prepared by one-pot polymerization of acrylamide (AM), isocyanoethyl methacrylate-glutamine (IEM-Gln), and Laponite XLG nanosheets. Owing to the potent hydrogen bonds formed by urea groups in IEM-Gln and hydrogen-bonding interaction between the polymer chain and nanoclays, the presented nanocomposite hydrogels displayed excellent mechanical properties (tensile strength of 160 kPa, stretchability of 2600%, compressive strength of 2.3 MPa, and toughness of 3300 J/m2). It was noteworthy that the hydrogels exhibited excellent notch insensitivity and fatigue fracture resistance, and even after 50 cycles, there was no measurable crack propagation observed. In addition, the introduction of clay nanosheets into the gelation system endowed the composite hydrogels with outstanding hemostatic activity and tissue adhesiveness. The nanocomposite hydrogels could not only reduce the skin tension of the wound tissue by their high tensile properties but also accelerate hemostasis in the first stage of wound healing, both of which led to the fast healing of skin wound in mice.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c01790.Additional experimental methods; 1H and 13C NMR spectra of IEM-Gln; FTIR spectra and digital photographs of hydrogels; mechanical properties of the L9A3G0.11 hydrogel; dissipated energy of each cycle of the L5A3G0.11 hydrogel in 10 consecutive loading–unloading cycles at 200% strain; loading–unloading cyclic tests of the L0A3G0.11 hydrogel; fracture energy of L0A3Gy hydrogels; in vivo and in vitro degradation of the L5A3G0.11 hydrogel; and mechanical properties of LmAxGy hydrogels with different compositions (PDF)Adhesiveness of the L5A3G0.11 hydrogel to a bleeding rat liver (MP4)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical
Fabrication of Fatigue‐resistant Hydrogel Via Annealing‐assisted Salting‐out Method As Flexible Strain Sensors

Chunxia Zhao,Zhonghua Dong,Min Guo,Liang Liu,Yuanpeng Wu,Yuntao Li,Dong Xiang,Hui Li,Jingjuan Lai,Li Wang

DOI: https://doi.org/10.1002/pen.26038

2022-01-01

Abstract:Hydrogels exhibit unique properties such as softness, biocompatibility, and responsiveness, which render such types of materials widely applicable in wearable devices. Although the toughness of hydrogels has been significantly improved over the past years to resist fracture deformations under the application of a single mechanical cyclic load, the already existing tough hydrogels are still prone to fatigue fracture when they are subjected to multiple cyclic mechanical loads. In this work, an annealing-assisted salting-out method was used to fabricate microcrystalline areas within the hydrogel to prepare anti-fatigue P(AAm-co-MPC)/PVA hydrogels. Interestingly, the fatigue threshold of these materials reaches the value of 480 J m(-2), much higher than that of the conventional synthetic hydrogel (1-100 J m(-2)). In addition, the proposed hydrogel structures exhibit excellent sensing performance, with a conductivity value of 0.42 S m(-1), and a long-term stable strain-current response (2500 cycles). The applicability of this technique is not limited only to conductive hydrogels, but can also be extended to enhance other functional hydrogels with poor fatigue resistance properties.
Strong and Tough Fully Physically Crosslinked Double Network Hydrogels with Tunable Mechanics and High Self-Healing Performance

Xiao-Hui Wang,Fei Song,Dan Qian,Yao-Dong He,Wu-Cheng Nie,Xiu-Li Wang,Yu-Zhong Wang

DOI: https://doi.org/10.1016/j.cej.2018.05.081

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:•Metal-coordination and chain entanglement are used as dual physical crosslinks.•The fully physical hydrogel has high tensile and compressive properties.•Good fatigue resistance and self-recovery performance are achieved for the hydrogel.•The hydrogel can self-heal with high tensile stress and strain.

Effect of mesoscale phase contrast on fatigue-delaying behavior of self-healing hydrogels

Mesoscale Bicontinuous Networks in Self-Healing Hydrogels Delay Fatigue Fracture.

Stress Relaxation and Underlying Structure Evolution in Tough and Self-Healing Hydrogels.

Multiscale Energy Dissipation Mechanism in Tough and Self-Healing Hydrogels.

Role of Hierarchy Structure on the Mechanical Adaptation of Self-Healing Hydrogels under Cyclic Stretching.

Effect of Structure Heterogeneity on Mechanical Performance of Physical Polyampholytes Hydrogels

High Fracture Efficiency and Stress Concentration Phenomenon for Microgel-Reinforced Hydrogels Based on Double-Network Principle

Structure Frustration Enables Thermal History-Dependent Responsive Behavior in Self-Healing Hydrogels

Predicting Fatigue Damage in Hydrogels Through Force‐Induced Luminescence Enhancement

Metal Welding-Inspired Phase Change Self-Healing Strategy Applied to High-Modulus Hydrogel Composites

Phase Separation Behavior in Tough and Self-Healing Polyampholyte Hydrogels

Ultra‐Tough Self‐Healing Hydrogel via Hierarchical Energy Associative Dissipation

A Transparent, Tough Self-Healing Hydrogel Based On A Dual Physically And Chemically Triple Crosslinked Network

Mechanically Strong and Tough Hydrogels with Excellent Anti-Fatigue, Self-Healing and Reprocessing Performance Enabled by Dynamic Metal-Coordination Chemistry

Enhance Fracture Toughness and Fatigue Resistance of Hydrogels by Reversible Alignment of Nanofibers

Fatigue behaviors of physical hydrogels based on hydrogen bonds

Investigating Temperature‐Dependent Microscopic Deformation in Tough and Self‐healing Hydrogel Using Time‐Resolved USAXS

Human-tissue-inspired anti-fatigue-fracture hydrogel for a sensitive wide-range human–machine interface

Highly Stretchable Nanocomposite Hydrogels with Outstanding Antifatigue Fracture Based on Robust Noncovalent Interactions for Wound Healing

Fabrication of Fatigue‐resistant Hydrogel Via Annealing‐assisted Salting‐out Method As Flexible Strain Sensors

Strong and Tough Fully Physically Crosslinked Double Network Hydrogels with Tunable Mechanics and High Self-Healing Performance