Abstract:Several "Beyond Li-Ion Battery" concepts such as all solid-state batteries and hybrid liquid/solid systems envision the use of a solid electrolyte to protect Li-metal anodes. These configurations are very attractive due to the possibility of exceptionally high energy densities and high (dis)charge rates, but they are far from being realized practically due to a number of issues including high interfacial resistance and difficulties associated with fabrication. One of the most promising solid electrolyte systems for these applications is Al or Ga stabilized Li7La3Zr2O12 (LLZO) based on high ionic conductivities and apparent stability against reduction by Li metal. Nevertheless, the fabrication of dense LLZO membranes with high ionic conductivity and low interfacial resistances remains challenging; it definitely requires a better understanding of the structural and electrochemical properties. In this study, the phase transition from garnet (Ia3̅d, No. 230) to "non-garnet" (I4̅3d, No. 220) space group as a function of composition and the different sintering behavior of Ga and Al stabilized LLZO are identified as important factors in determining the electrochemical properties. The phase transition was located at an Al:Ga substitution ratio of 0.05:0.15 and is accompanied by a significant lowering of the activation energy for Li-ion transport to 0.26 eV. The phase transition combined with microstructural changes concomitant with an increase of the Ga/Al ratio continuously improves the Li-ion conductivity from 2.6 × 10-4 S cm-1 to 1.2 × 10-3 S cm-1, which is close to the calculated maximum for garnet-type materials. The increase in Ga content is also associated with better densification and smaller grains and is accompanied by a change in the area specific resistance (ASR) from 78 to 24 Ω cm2, the lowest reported value for LLZO so far. These results illustrate that understanding the structure-properties relationships in this class of materials allows practical obstacles to its utilization to be readily overcome.

Interfacial Modification of Ga-Substituted Li 7 La 3 Zr 2 O 12 against Li Metal via a Simple Doping Method

Stabilization of Li7La3Zr2O12 Solid Electrolyte through Ga-Based Precipitates and the Ga–Au Surface Layer

Defect chemistry engineering of Ga-doped garnet electrolyte with high stability for solid-state lithium metal batteries

Study of Codoping Effects of Ta5+ and Ga3+ on Garnet Li7La3Zr2O12

Ga-doped lithium lanthanum zirconium oxide electrolyte for solid-state Li batteries

Experimental and Theoretical Study on Enhanced Electrochemical Properties of Double Doped Garnet-Type Solid Electrolyte

Structural and Electrochemical Consequences of Al and Ga Cosubstitution in Li7La3Zr2O12 Solid Electrolytes

Preparation and performances of gallium-doped LLZO electrolyte with high ionic conductivity by rapid ultra-high-temperature sintering

Doping Implications of Li Solid State Electrolyte Li7La3Zr2O12

Tri-Doping of Sol–Gel Synthesized Garnet-Type Oxide Solid-State Electrolyte

Co-doping strategy enhanced the ionic conductivity and excellent lithium stability of garnet-type Li7La3Zr2O12 electrolyte in all solid-state lithium batteries

First-principles Calculations and Yb3+ Doping Effects Study of Garnet-Type Solid State Electrolytes

Improvement of Ionic Conductivity in Li7La3Zr2O12 (LLZO) Solid Electrolyte By Doping with Aluminum/Tungsten

Garnet-type Solid-state Electrolyte Li7La3Zr2O12: Crystal Structure, Element Doping and Interface Strategies for Solid-state Lithium Batteries

A Low-Cost Al-doped Garnet Li7La3Zr2O12 with High Ionic Conductivity for High-Energy Solid-State Lithium Metal Batteries

Recent Strategies for Lithium-Ion Conductivity Improvement in Li7La3Zr2O12 Solid Electrolytes

A Simple and Efficient Strategy for Ameliorating Li/LLZO Interfacial Contact

Study on the role of Li2O–Ga2O3-GeO2-Gd2O3 glass doped into Li7La3Zr2O12 solid-state electrolyte

Comprehensive Dopant Screening in Li7La3Zr2O12 Garnet Solid Electrolyte

Experimental and Computational Study of Mg and Ta‐Doped Li7La3Zr2O12 Garnet‐Type Solid Electrolytes for All‐Solid‐State Lithium Batteries (Adv. Sustainable Syst. 6/2024)