Abstract:The interfacial characterization of aligned carbon nanotube/polyimide nanocomposites. The interaction properties can be significantly improved by using conjugated polymers with aromatic rings for carbon nanotube (CNT)‐reinforced composites. In this study, we investigated the influence of the molecular structure of the polyimide (PI) conjugated polymer on the mechanical properties and interfacial characteristics of CNT/PI composites. To that end, nanocomposites composed of aligned multi‐walled carbon nanotubes (MWNTs) and PI with three different molecular structures were examined. Tensile tests, small‐angle x‐ray scattering (SAXS), and molecular dynamics (MD) simulations were conducted, which revealed significant variations in the tensile properties among the three aligned MWNT/PI nanocomposites. The SAXS analyses indicated that MWNT/BPDA‐PDA had the largest interfacial specific surface area, as corroborated by the MD simulation results, which further demonstrated that the rigidity of the molecular structure influenced the extent of wrapping the PI chains around MWNTs. A highly rigid molecular chain hindered the intrachain folding of the PI chain, facilitating better wrapping of the MWNTs and a larger interfacial area. The MWNTs induced conformational changes in the PI chain owing to π–π stacking. Hermans orientation factor revealed that BPDA‐PDA exhibited the highest degree of orientation with MWNTs, whereas BTDA‐MPD displayed the greatest extent of MWNT‐induced conformational changes. The calculated interaction energy confirmed that MWNT/BTDA‐MPD exhibited the strongest interface strength (−41.50 Kcal/mol/nm2), which was 36.32% and 43.03% higher than that of MWNT/BPDA‐ODA and MWNT/BPDA‐PDA, demonstrating its superior tensile properties. This study provides insights into the interfacial characteristics between conjugated polymers and CNTs, which are essential for designing interfaces and developing high‐performance nanocomposites. Highlights Interfacial interaction between polyimide and aligned carbon nanotubes was investigated. Modulation by polyimide structures on the mechanical property of composite was revealed. The rigidity of the polyimide hinders the folding and facilitates the wrapping. The interfacial interaction induces molecular orientation in polyimide can be observed by molecular dynamic simulation.

Design and Experiment of Polyimide/Ti Wire Composite with the Interface Chemically Grafted through Carbon Nanotubes

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

High Strength Composites Using Interlocking Carbon Nanotubes in A Polyimide Matrix

Fabrication and multifunctional properties of polyimide based hierarchical composites with in situ grown carbon nanotubes

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Tribological behaviors of polyimide composite coatings containing carbon nanotubes and fluorinated graphene with hybrid phase or blend phase

Fabrication and properties of high performance polyimide nanofibrous films by electrospinning

Molecular dynamics simulation of polymer wrapping for interfacial characteristics of aligned carbon nanotube/polyimide nanocomposites

Dramatic Enhancements In Toughness Of Polyimide Nanocomposite Via Long-Cnt-Induced Long-Range Creep

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene

Covalent Bond-Assisted Continuous Interface Structure for High Thermal Conductive Polyimide Composite Films

Dual covalent bond induced high thermally conductive polyimide composite films based on CNT@CN complex filler

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

Electrospinning Fabrication of High Strength and Toughness Polyimide Nanofiber Membranes Containing Multiwalled Carbon Nanotubes

Simultaneous grafting of carbon nanotube and hyperbranched poly(thioether‐yne) onto carbon fiber via thiol‐alkyne click chemistry to improve interface properties of carbon fiber/epoxy composite

Tribological behavior and mechanism of Mo2Ti2C3/polyimide composite films under dry friction condition

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Synthesis and properties of the amino-functionalized multiple-walled carbon nanotubes/polyimide nanocomposites

Improved Mechanical and Electrical Properties in Electrospun Polyimide/multiwalled Carbon Nanotubes Nanofibrous Composites

Modulating Carbon Fiber Surfaces with Vinyltriethoxysilane Grafting to Enhance Interface Properties of Carbon Fiber/Norbornene–Polyimide Composites

Improved mechanical/tribological properties of polyimide/carbon fabric composites by in situ-grown polyaniline nanofibers