Abstract:The interface properties between surface grown carbon nanotubes carbon fiber (CNTs‐CF) and epoxy resin were investigated by different modification methods. The X‐ray photoelectron spectrometer probations show that the pristine CNTs‐CF has very low contents of both oxygen element and active carbon element. Taking the naked carbon fiber (CF) without CNTs grown as a reference, the interfacial shear strength (IFSS) of CNTs‐CF/epoxy is only 5.6% higher. After heat treatment, chemical modification and sizing treatments, the surface chemical activity of CNTs‐CF is improved considerably. In contrast with the IFSS of standard CF/epoxy, the interfacial strength of chemical‐treated CNTs‐CF‐E1/epoxy is increased to 122.8 MPa by 29.7%. The increasing content of the epoxy active groups at the modified CNTs‐CF‐E1 surface is conducive to forming covalent bonds between the epoxy resin and the CNTs‐CF‐E1 surface particularly the activated nanotube surface. The enhancement of CNT/epoxy interface is beneficial to the over whole interface property of the composites. Hence, the compressive and torsion strength of sizing CNTs‐CF‐E1 bundle combined with epoxy resin are increased by 32.4% and 14.1%, respectively. The SEM images show the failure morphologies of different modification methods, and the enhancement mechanism of multiscale interface is further clarified. Compared with chemical treatment, heat treatment can remove the inert amorphous carbon on the CNTs‐CF fiber surface and improve the interface adhesion of CNT/epoxy and CF/epoxy, and surface sizing treatment improves the CF/epoxy interface. The enhancement mechanisms of these modified CNTs‐CFs/epoxy should be ascribed to the competition and synergetic effects of the multiscale interfaces, including CNT/CF, CNT/epoxy, and CF/epoxy.

Simultaneous grafting of carbon nanotube and hyperbranched poly(thioether‐yne) onto carbon fiber via thiol‐alkyne click chemistry to improve interface properties of carbon fiber/epoxy composite

Chemical grafting of nano-TiO2 onto carbon fiber via thiol–ene click chemistry and its effect on the interfacial and mechanical properties of carbon fiber/epoxy composites

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

A novel π bridging method to graft graphene oxide onto carbon fiber for interfacial enhancement of epoxy composites

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Grafting Carbon Fibers with Graphene via a One-Pot Aryl Diazonium Reaction to Refine the Interface Performance of T1100-Grade CF/BMI Composites

The Role of Grafting Force and Surface Wettability in Interfacial Enhancement of Carbon Nanotube/carbon Fiber Hierarchical Composites

Functionalized carbon fibers with MXene via electrochemistry aryl diazonium salt reaction to improve the interfacial properties of carbon fiber/epoxy composites

Enhancing the Interfacial Shear Strength and Tensile Strength of Carbon Fibers through Chemical Grafting of Chitosan and Carbon Nanotubes

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

Construction of an Orderly Carbon Fiber/Carbon Nanotubes Hybrid Composites by a Mild, Effective, and Green Method for Highly Interface Reinforcement

Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

Simultaneously improving interfacial adhesion and toughness of carbon fiber reinforced epoxy composites by grafting polyethyleneimine on the carbon fiber surface to construct a rigid‐flexible interface

Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol

Constructing a Superior Interfacial Microstructure on Carbon Fiber for High Interfacial and Mechanical Properties of Epoxy Composites

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites

Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites