Abstract:The addition of Mo2Ti2C3 MXene to the PI matrix enables the polymer to form a slick and stable transfer film during sliding, which helps to reduce coefficient and wear rate. This method can improve the tribological properties of PI and broaden its application field in flexible condition. Polyimide (PI) has good mechanical properties and thermal stability, while high coefficient (COF) and wear rate limit its wide application. In order to endow PI with better friction and wear resistance, Mo2Ti2C3 MXene was used as solid lubricant to prepare Mo2Ti2C3/PI nanocomposites with different content of Mo2Ti2C3. The effect of the amount of Mo2Ti2C3 on the tribological behavior of PI was explored and the tribological mechanism was also analyzed Tribological tests showed that at 1.2 wt% of Mo2Ti2C3 addition, the composite material demonstrated superior friction and wear resistance, exhibiting a 19.9% decrease in the COF and a 79.7% decrease in the wear rate compared to single PI due to the good self‐lubricating properties of Mo2Ti2C3 MXene. Moreover, Mo2Ti2C3 can also effectively assist PI to form sleek transfer films without interruption or gaps on the steel balls, resulting in a reduced friction COF and wear rate of the material. This work demonstrates that Mo2Ti2C3 MXene is an aussichtsreich additive for polymers to improve the tribological properties and broadens the applications of Mo2Ti2C3/PI composites in friction material area. Highlights Mo2Ti2C3 significantly improves the tribological performance of polyimide. The thermal properties of Mo2Ti2C3/polyimide are enhanced by the introduction of Mo2Ti2C3. The minimum coefficient of Mo2Ti2C3/PI composites was only 0.246 at the 1.2 wt% content of Mo2Ti2C3. The wear rate of Mo2Ti2C3/PI composites was decreased by 79.7% at the 1.2 wt% addition of Mo2Ti2C3. Mo2Ti2C3 promotes the establishment of tribo‐film to protect the Mo2Ti2C3/PI composites from friction.

Tribological behavior and mechanism of Mo2Ti2C3/polyimide composite films under dry friction condition

2D Mo2CTx Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures

Highly lubricating and wear‐resistant Ti3C2Tx@SiO2/PI composites based on the action of transfer film at the friction surface

Lubrication mechanism of polyimide/V2CTx MXene composites based on surface chemistry

Ti3C2 MXene induced high tribological performance of polyimide/polyurea copolymer at a wide temperature range

Tribological Properties of Polyimide Composites Modified with Diamondoid Metal–Organic Frameworks

Tribological behaviors of polyimide composite coatings containing carbon nanotubes and fluorinated graphene with hybrid phase or blend phase

Synergetic Enhancement of Wear Resistance of Polyimide Coatings through the Integration of MoS 2 Nanoflowers and MXene Nanosheets

Enhanced tribological properties of polyimide composite with carbon fiber/graphitic‐carbon nitride nanosheets

Synergistic Effects of Carbon Nanotube/Nano-MoS2 Hybrid on Tribological Performance of Polyimide Nanocomposite Films

A new polyimide matrix composite to improve friction-induced chatter performance through reducing fluctuation in friction force

Growth of ultra-dense MoS2 nanosheets on carbon fibers to improve the mechanical and tribological properties of polyimide composites

Comparative study on tribological mechanisms of polyimide composites when sliding against medium carbon steel and NiCrBSi

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene

Exploring the Friction and Wear Behaviors of Ag-Mo Hybrid Modified Thermosetting Polyimide Composites at High Temperature

Tribological properties of polyimide coatings filled with graphene oxide and MXene composite nanofillers

Tribophysical and tribochemical effects of a thermoplastic polyimide

Modified Graphene/Polyimide Nanocomposites: Reinforcing And Tribological Effects

Polyimide-based composite coatings for simultaneously enhanced mechanical and tribological properties by polyhedral oligomeric silsesquioxane

Friction and wear behavior of polyimide matrix composites filled with nanographite

Influence of the Matrix Material and Tribological Contact Type on the Antifriction Properties of Hybrid Reinforced Polyimide-Based Nano- and Microcomposites